I am aware there is a transpose function, however I do not want to use this as you are unable to change an array easily.
What I would like to do is create a formula that selects A2:A5 and transposes this in cells B1:E1 as shown below.
I work on some High-throughput Projects analyzing biological samples. The software we use for analysis spits out the data into excel. This is all well and good, being mostly automated. However, my issue arises when I get the output data. It's simply one long list of values in a single column. This could potentially be 384 entries. Depending on the parameters of our experiment, I'd like to be able to take a set number of consecutive entries and transpose them to another worksheet. However I don't know how to loop the function to get the specific entries transposed to their specific worksheet. I'm pasting a recorded macro I made to illustrate my point.
Sub HTSoutput1()
Range("B2:B9").Select
Selection.Copy
Sheets("K562").Select
Range("B2").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "2330"
Sheets("Nuclei").Select
Range("B10:B17").Select.............
I am looking for a formula as per the thread title. I have attached an example workbook.
I have been playing around with SUMIFS and SUMPRODUCT but can't crack it.
sum based on criteria transpose columns to rows.xlsx
I have an Excel Sheet1
The sheet has horizontal info a list of "headers" going horizontally across row 2. So row 2 may have A2= Date, B2=Name, C3=Style, D3= ........
The header rows will vary in some cases. I want to use a formula to copy and transpose the information to Sheet2. I would like the list of headers to go vertical instead of horizontal. So A1=Date, A2-Name, A3=Style, A4= ..... all the way down.
I know about Copy -> Special -> transpose but I need something that is dynamic and simple. I know I can use the indirect function and do something like this =INDIRECT( "Sheet1!" & ADDRESS(1,2) ) . However I was trying to figure out two things. How best can I make the columns dynamic and increment up especially if I am not starting at A1? Is there a better formula to use that is not volatile like INDIRECT?
Using the formula =E+1 will produce a sequential list when copied down. Changing to E+2 produces a list that increases by 2 in each row.
I am looking for a formula that will give me a list of column references that increase by 2 . If the first row is row "F" the next row will be "H" then "J" and so on.
Something like =E+(columnF+2).
I would like to transpose the data below Columns( A & B).GroupPersonAA1AA2AA3AA4BB1BB2BB3CC1CC2
To this format on Sheet2 Starting in A1.
ABCA1B1C1A2B2C2A3B3A4
I’m trying to have a transpose formula with a variable in the VBA code. The Data is in column AG, starting in row 6 but the end is always different. The transpose formula should copy the data into Column Z (also with a variable row). So if the Data is AG6:AG7 it should go for example to Z 50 and AA 50 etc.
Dim lngTransposeBottom As Long
Dim lngFormulaDataBottom As Long
Dim countnonblank As Integer, myRange As Range
Set myRange = Columns("AG:AG")
countnonblank = Application.WorksheetFunction. CountA(myRange)
Range("Z" & lngFormulaDataBottom).Offset(3, 0).Select
Range(Selection, Selection.Offset(0, countnonblank)).Select
lngTransposeBottom = Range("AG65536").End(xlUp).Row
Selection.FormulaArray = "=TRANSPOSE(R6C33,R""" & lngTransposeBottom & """C33)"
Unfortunatly I always get the following error message: “Unable to set the FormulaArray property of the Range class”. how to change the code to get it up and running?
Extract data from one sheet to another sheet then transpose automatically.
I have attached the work book of what I'm trying to accomplish.
I have two columns of data as follows:
10:57:42 273
10:57:42 263
10:57:42 253
10:57:42 241
10:57:37 273
10:57:37 243
10:57:37 249
10:57:37 261
10:57:37 253
11:04:47 241
11:04:47 253
11:04:47 263
10:54:31 254
10:54:31 240
10:54:31 265.......
I have a user form which I would like info entered into various text boxes to be assembled in a way which can be copy and pasted. See the attached example to see the results I am looking for.
View 2 Replies View RelatedI have been trying to transpose a data set. Transpose formula is not working with this data set. How should i proceed ?.
View 4 Replies View RelatedI want to transpose the data set. I am using the following formula
HTML
INDEX(Dataset!$B$2:$Y$13366, MATCH(B$1, Dataset!$A$2:$A$13366, 0), MATCH($A2, Dataset!$B$1:$Y$1, 0))
But there seems some problem with the reference of year (I want the range will change From A2:A15 then it will start from A17:A31 like this until my row ends at 13366).
I have very large sections of data which I need to transpose as links.
Problem is that the copy/paste links function cannot be followed up with the
copy (the linked cells)/transpose option, without having the transposition
screw the links up.
I have a list of numbers in Col.A which can be variable in length.The objective is to copy these numbers into Columns with 3 col gaps in between.So the objective is that these numbers are listed horizontally (with 3 col.gaps separating each nr).To achieve this I have written the script below. However, as the orig.list of p/ns in Col.A can be variable, I would like to perform the transposing in blocks of 10 numbers.The transposed end product should be listed 10 numbers in each row (with 3 col gap between)rather than in one row. how to modify my vba script to do the above?
Code:
Sub TransposeSkippingColumns()
Dim c As Range
Dim i As Long
[Code]....
I have an excel spreadsheet with my students' grades on it. I want to be able to click on a student's name and have a list of all the assignments, along with only that student's corresponding grades, transposed on a new sheet so that I can print out to give to a parent.
View 13 Replies View Relatedsee attached WB.
Preferable solution using only Sheet Formulas only.
I have a column of numbers going down the sheet in column A.
I need to concatenate all the numbers in each cell in the column and
separate each by a comma. This would then be displayed as a long list
all in cell B1.
I was recently helped very much by the forum moderator and code from D_Rennie in a file to transpose about 25,000 rows into a few organized columns. The code worked very well. I have a slightly new twist on the problem. I have uploaded a different file with a different data structure in the columns but the same need for the data to be transposed to the columns under the same headings. This VBA worked very well before, but I can't seem to re-use it for this new dataset.
View 8 Replies View RelatedI have a set of chemicals from groundwater tests at various wells. I need to sort the data, but chemical names can prove to be frustrating, since often times numbers or letters are found before the chemical name. Essentially, I'm trying to sort like this example:
Further complicating things is that at the end there's a (m,p-Xylene) and (o-Xylene) thrown into the mix.
Is there an easy way to do this sort? I imagine I'll have to have some sort of reference list that the sorting looks to?
After I sort it and do some data manipulation, I have a macro that transposes the data like the example below:
Here's the macro:
Sub Step4_ReorgData()
Dim w1 As Worksheet, wR As Worksheet
Dim c As Range, LR As Long, NR As Long, NC As Long
Application.ScreenUpdating = False
[Code].....
I ve got a similar issue with converting the rows to columns... At the file I attached below, I need to convert to columns some sort of data which is organized as rows. They are all set up as 12 cells in a row and I need to convert them to a single column which keeps the time references of the data. I mean, both of the data and their years will be needed for my aims, but it is not important to keep the years columns with dataset, as long as rows are literally converted to columns under their order.
I actually found a vba macro on the net but it doesn't useful at all when it comes to keeping all data in their original order. It has some specific design to solve the issue without the aim of keeping the data in its original order I guess. Is there any possibility to modify its code or any other way to do this?
Code:
Sub Data_to_Column()
Dim rData As Range
Dim r As Range, c As Range
Dim rStart As Range
Dim counter As Integer
[Code]...
I am working with a huge database and need to transpose every ten cells in a column to ten rows.
Below is what I would like it to do, currently columns 90-0 are blank and I am trying to get a script to do it as I have over 550 subjects.
Subject
EconSlideQ6.RESP
90
80
70
60
50
40
30
20
10
0
[Code] .......
I have two columns of data of which I need to transpose into rows. Sounds easy enough but the data looks like the following:
Business Role
Person
Accounts Payable Voucher Reviewer
SMITH,JOHN
[Code].....
I have read some sites talking about index and column or using VBA.
I work on some High-throughput Projects analyzing biological samples. The software we use for analysis spits out the data into excel. This is all well and good, being mostly automated. However, my issue arises when I get the output data. It's simply one long list of values in a single column. This could potentially be 384 entries. Depending on the parameters of our experiment, I'd like to be able to take a set number of consecutive entries and transpose them to another worksheet. However I don't know how to loop the function to get the specific entries transposed to their specific worksheet. I'm pasting a recorded macro I made to illustrate my point.
Sub HTSoutput1()
'
' HTSoutput1 Macro
' Macro recorded 3/2/2007 by Jack Rosa
'
' Keyboard Shortcut: Ctrl+q
'
Range("B2:B9").Select
Selection.Copy
Sheets("K562").Select
Range("B2").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "2330"
This would have to be repeated for a column that contains 312 entries so that I end up with each destination worksheet containing a 13row x 8col table (or should it be called an array?).
Is there a function or VBA out there that would allow me to transpose non-contiguous cells? For example, say I want to transpose ther contents from cells A1, C1, E1, G1, and I1 on worksheet 1 to A1:A5 on worksheet 2.
View 9 Replies View RelatedI have a spreadsheet like the following, in 2 columns: ...
View 9 Replies View RelatedI have 9 worksheets with 80 wells listed and Jan thru Dec prod for each well.
The current format is: ...
I am trying to create a graph for each store in my data sheet.
I have a data sheet with a list of stores that lists the quantity that was ordered by each store for the month of December. Not all stores placed ordered on the same dates.
What I would like to do is take the data from store line and create three columns that are: ....
Attached is a sample of my challenges.
View 8 Replies View RelatedI need to transpose some data for import into our accounts package, the budgets are produced in a fairly standard horizontal format with periods across the top & account codes vertically.
The import requires period data to be be transposed vertically
I have attached a worksheet with an example, is this possible in excel. the only way I have managed to accomplish this is via MS Access
I've taken part of our instrument service data and eventually want to trend the performance but have decided it will only useful to use data where I have 4 or more data points. However with so much data I want to automate the process rather than scrolling through the column. I assume this requires a lookup table of sorts but I don't know how to combine that and getting the other bits of relevant information (I.e. all dates and results).
GavInstrument Spec data.xlsx