I am looking for a formula as per the thread title. I have attached an example workbook.
I have been playing around with SUMIFS and SUMPRODUCT but can't crack it.
sum based on criteria transpose columns to rows.xlsx
I have attached an example workbook with a tiny subset of data and a number of criteria from the Dashboard Engine page removed.
What I need is to sum the total value for each division on the second sheet based on the date criteria (so for the first cell Jan 1/2010 - Jan 31/2010) and on a match between division name on the Dashboard Engine sheet table and the Masterdata sheet. I have tried a number of variations but keep getting a 0 for each return.
Sample Workbook.xlsx
I am working with a huge database and need to transpose every ten cells in a column to ten rows.
Below is what I would like it to do, currently columns 90-0 are blank and I am trying to get a script to do it as I have over 550 subjects.
Subject
EconSlideQ6.RESP
90
80
70
60
50
40
30
20
10
0
[Code] .......
i m trying to use the sumproduct formula, and OR but i cannot seem to get this right! =Sumproduct(--(A1:A10="Yes"),--(OR(B1:B10="Yes",B1:B10="Mayby")),C1:C10)
I have also tried Array Formula as follows; {=SUM(IF(A1:A10="Yes",IF(OR(B1:B10="Yes",B1:B10="Mayby"),C1:C10)))}
I have also used UDF to for the sumproduct, but cannot make that work! keep giving me value message
Function
Function Customer(Service as Range, Outcome as String, Service2 as Range, Outcome2 as String)
Customer = Sumproduct(--(Service = Outcome),--(Service2 = Outcome2), Result)
-Didnt get thru this bit to start building on the Function! keep giving me #Value!
formula to count two criteria in the one column if there is a third criteria in another column. i.e. if column B = either "A" or "B" and column C="D". I have tried the countifs function without success.
View 4 Replies View RelatedI am aware there is a transpose function, however I do not want to use this as you are unable to change an array easily.
What I would like to do is create a formula that selects A2:A5 and transposes this in cells B1:E1 as shown below.
I've got an issue where I'm trying to transpose data from one column into several rows. I've been looking for a macro to help me out but can't seem to find a way to do this. Does anyone have any idea how I can do this?
Ideally, the macro would be written so it would find the data in the column and move it to a new sheet and then it would repeat the process throughout the document. The macro would know that the data is grouped b/c of the blanks found between the data set. So as the macro is running, once it hits a blank, it would then copy and transpose the data and continue. Does this make sense?
I've posted a sample of the info I'm working with.
I have a list of names in columns with a header row. On another page labeled one of the header row names I need to call the corresponding names from the 1st page to the second page and transpose the range.
View 9 Replies View RelatedI frequently have to work with tables set up like this:
A1 A2 A3
B1 B2 B3
C1 C2 C3
All I would like to do is to transpose them into one single column:
A1
A2
A3
B1
B2
B3
C1
C2
C3
I have a spreadsheet that calculates data in multiple columns (A:AN) and each column has 27 rows of data called "Sheet 1". As it stands, the spreadsheet goes out very far. On "Sheet 2" I would like for all of the data in "Sheet 1", columns A:AN to be "transposed" to "Sheet 2" in column A only. So, column A on "Sheet 2" would have the data from "Sheet 1" A1:A27, B1:B27, C1:C27, so on and so forth. I would like for the formatting to maintain the same order as well.
An example would be:
Sheet 1
Column A B
Row
1 Green Red
2 Blue Yellow
3 Black Cyan
4 Pink Magenta
[code]....
I want to transpose multiple rows to single column and I'm dealing with huge data.
For example, I am working with data like this
A1 A2 A3
B1 B2 B3
C1 C2 C3
and I have to transpose to
A1
A2
A3
B1
B2
B3
C1
C2
C3
I'm using following vb code:
Sub ToOneColumn()
Dim i As Long, k As Long, j As Integer
Application.ScreenUpdating = False
Columns(1).Insert
[Code] ........
The script terminate without completing the job and shows error as "runtime error '1004': application -defined or object defined error".
I have an Excel Sheet1
The sheet has horizontal info a list of "headers" going horizontally across row 2. So row 2 may have A2= Date, B2=Name, C3=Style, D3= ........
The header rows will vary in some cases. I want to use a formula to copy and transpose the information to Sheet2. I would like the list of headers to go vertical instead of horizontal. So A1=Date, A2-Name, A3=Style, A4= ..... all the way down.
I know about Copy -> Special -> transpose but I need something that is dynamic and simple. I know I can use the indirect function and do something like this =INDIRECT( "Sheet1!" & ADDRESS(1,2) ) . However I was trying to figure out two things. How best can I make the columns dynamic and increment up especially if I am not starting at A1? Is there a better formula to use that is not volatile like INDIRECT?
I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI have a column with (for example) 5 entries A1, A2, A3, and so on. I would like to pick up this data, tranpose it into a row, put it on the 2nd sheet, but (again for example) be specific about where i want it to go. I may want to have A1 at B2, A2 at E2, A3 at H2, etc
-A B C D E F G H
1x
2y
3z
4
5
becomes
-A B C D E F G H
1
2 -x - - y - - z
3
4
5
If i have the following layout of data
Column 1 Column 2
January 1000
January 1234
February 1300
March 1600
January 15
March 123
April 234
January 3000
I would like a formula that adds all the January numbers together returning a result of 5249
To move this one step further i would eventually need to add these numbers based on quarters, for example if the value is January February or March in column 1 then add the numbers in column 2.
I'm sure i have done this before using a countifs maybe but my mind has drawn a blank
I am trying to get an average from one column based upon criteria from an adjacent column. The number of days to close a case for race columns Black and White are listed in B5:C16 and E5:F16 and H5:I16. I need a formula to calculate the average days taken to close cases for Males and then the same for Females. Sample below: ...
View 12 Replies View RelatedI have an personnel file with employee info, and I want to create a macro that will look in the "Master" worksheet at the Department column ("I") for anyone in Benefits, and then copy their name from the Name column ("D") into the "Benefits" worksheet. The names should begin pasting in cell "D3" but will recognize if a cell already has a name in it and then paste in the cell below that.
Here is what I have:
Option Explicit
Public Sub RatingbyDept()
Dim Dept As Range
With Sheets("Master")
For Each Dept In .Range("I2:I1000")
With Dept
I keep getting error 92 - "For loop not initialized".
I am trying to reformat the attached doc into one single column, It's a race listing of overseas marathons and I need it to look like this
Event Name
Event Date
City
Country
Entry fee
Website
in date order, one event after the other in a single column so I can flow it into a word doc ready to be designed. I need to apply in Excel (I am using 2007) to get this doc into the required format?!!
I have 2 columns; 1 with "dates" of incidents, the other with "number of incidents". The dates are not in any order but I want to be able to count "number of incidents" for certain time periods. e.g. If dates are between 01/02/14 and 28/02/14, what are the number in incidents. This number would be represented on a new worksheet.
I've looked at COUNTIF/S, SUMIF but just cant get there.
The below sample is an accurate example of a much larger set of data. Column H will be my desired result.
I need a macro that will look at the matching values (numerical value of month) of Column F, then enter the sum of the corresponding values (rows) contained in Column D for that month. The sum of each month should be placed in Column H at the last value of the row for each particular month.
A
B
C
D
E
F
G
H
1
Item#
Description
Quantity
Month
Year
2
1001
[Code] ........
VBA code to summarise a column based on 2 other columns.
All flagged codes must be summed and all non flagged codes summed.
code.....amount.....flag.......summerised code..sum amount...flag
aaa100...yaaa200...ybbb100...ybbb200...yaaa100...yccc100...ybbb100...yaaa300ccc100...ybbb300
aaa100ccc200aaa100bbb100bbb100ccc100ccc100aaa100bbb100
I have 3 columns of data
Months Date Description Royalty
1 11/1/2010 XTY 5555
2 12/1/2010 xxx 4444
about 100 or more lines of data
Months is the running count of the number of months
Bottom line: Starting at 3/1/2011, I need to know how many months did it take to earn $125,000 (Royalty)
I have a dataset in Excel with first names, last names, states, cd sales total cost by state... and I am I started a new worksheet cales total sales y state. Now, in this new sheet I want have the states copied over and in the B2 cell I want to write a formula that will enable me to have the total cost from O2:O112 cells ("Total Sales") to be sumed up by each state with absolute references. How would I do this? Example I am currently using =SUMIF(Demographics!F2:F112, "AK", Demographics!O2:O112) which is giving me the correct total sales for AK, but I want to copy this formula using absolute references and have the states change while keeping the fields O2:O112 the same. I just don't want to enter in each state which is what I was starting to do, but It will take a while =SUMIF(Demographics!F2:F112, "IA", Demographics!O2:O112) as an example here is Totals by State! worksheet:
AK $324.50 <---- Total from Demographics! for AK
IA $428.68........................
I am looking to count every 4th column that has a average score less than 90. My columns are set with 3 scores and 4th column has the average of those scores. Like such:
untitled.jpg
I can count them using a SUMPRODUCT(--(MOD(COLUMN function but I cannot get a criteria to work.
Non-VBA preferred
Attached is a workbook that better explains what I am trying to do. I am counting pastdue accounts from several different insurance companys. I have several pastdue brackets, and I need the total amount of pastdue accounts for each bracket, for each insurance company. I think the countifs function wrapped in an index match may get the job done, but I have not been able to figure it out. right now I have a countifs wrapped in an if statement, and it is producing incorrect results.
test book 1.xlsx
I would like to title columns based on values from other cells...
View 9 Replies View RelatedI am trying to auto-fill a column based on certain criteria - in other words, fill in blank cells based on a cell above, just a little more complex version. I have added an attachment to give everyone a visual of what I am describing and then maybe this explanation will make a little more sense.
First, if you open the attachment, the left hand side is a small example of what I have. The middle is the condition. And the right hand side is what I'd like to see happene.
In the example, I am matching up a time and when I hit that time, I am adding on a certain number of miles per hours based on the condition and the cell above. Meanwhile, I am filling in the blank cells with the condition until the condition changes. So a cell is incremented based on the condition and gets its value from the cell above.
I'm not sure if this is the correct way to display my sample data, but here it is (how to change it. I looked in the guidelines, but I can't download anything onto this computer, so I can't get the HTML maker)
A
B
C
D
E
F
G
H
I
1
Descriptor
Group
Identifier
Inventory
Total Vaue
Invetory Type
Group
Total Incomplete Inventory Value
[Code] .......
Here is what I would like in:
The sum of the total value of half finished and unfinished inventory for each group.
So, for group one, it would be 145. For group two if would be 38, and group three would be 316. (displayed in column I)
I think an array formula would do this, but I'm not really sure how this would work.
I have a sheet with 2 columns. First Column lists sizes of Devices. Second colum lists a servername. Example:
A B
30 server_a
30 server_a
65 server_a
65 server_a
45 server_b
45 server_b
15 server_b
What I want to do is a device count, not device sum on a criteria based on Column B.
For instance whenever column B equals servername A, then count how many devices it has.
This would equal 4 instead of 190 which is the sum of the devices. I can do a sumif statement, very easily, but I don't want a sum, I just want a count.