I have default settings for new workbooks and worksheets including,
zoom=86/Arial 8/, 0.00/ etc.
I set these up using the .xlt file for templates and they work correctly.
However, when I create a new window under the "Window" menu item, it opens the new window with different (Excel Default?) settings.
Can this new window be made to open with my user-defined settings?
I created a custom tab withthe UI editor into my personal sheet which is set as startup and I want to have this tab automaticly shown when it is opened.
So when the workbook is opened I would like the show the tab Andre rather than the home tab.
Can I use a custom curosr instead of the default cursor/pointer in excel? I want to use a small dot... my cells are pretty small, and when I put the cursor on top of the cell, I can't see the contents of the cell.
I am using Excel 2007. I have a template BOOK.xlt in the XLSTART folder which opens a customized workbook each time I start Excel. This part works fine. If I want to open a NEW workbook, with Excel already open, by clicking the OFFICE BUTTON, NEW, BLANK WORKBOOK, I do, in fact get a blank workbook, but without any customization. Is there a way to open a NEW workbook with customization using OFFICE BUTTON, NEW, BLANK WORKBOOK set of keystrokes?
View 4 Replies View RelatedI have an excel document with about 7 worksheets in it. The users of these worksheets can save the document but they never save it with the page view starting from the top. How can i ensure that whenever this document is open the default view for all the contained worksheets is at the top (ie:cell a1).
View 2 Replies View RelatedI would like the workbook to open to a specific worksheet everytime it is opened regardless of what worksheet it was in when file was saved. Can someone point me in the right direction?
View 2 Replies View RelatedExcel 2002 SP3
When a file is currently open, and the user selects "Save as", it takes them to the files native directory. (Where it was last saved).
If the user has that same file open, opens another file from a different directory, goes back to the first file and selects "Save as", it takes them to the location where the last file was opened from.
Using Excel 2010 - I have a large workbook with multiple worksheets - been using it succesfully every day for a long time. All of a sudden every empty cell, and any cell not specifically formated in every worksheet has a default cell format of Time. Any new workbook created is OK.. defaults to 'General' - But, if I add a new blank worksheet to this particular workbook it defaults to 'Time' format. How did the default cell format for this workbook become set to 'Time' from 'General' and how do i fix it?
View 2 Replies View RelatedHow to disable the default close button in a workbook not to affect in my command button close.
I tried already cancel = true but my command button close is also been canceled.
I am looking for a vba where by the default colour of the font for new text typed in any cell of a workbook change to green or red and the default black automatic becomes secondary. The existing text in the workbook in its existing font colour must not change i.e stays in black or red.
View 1 Replies View RelatedI have Excel 2002. If I start the program it opens with a blank workbook, called "Book 1".
If I then open an existing workbook, I have two Excel buttons in the Windows taskbar: the one I just opened, and the blank one titled Book 1.
At work I have Excel 2003. The blank "Book 1" is also there when I start the program, but if I then open an existing workbook, the Book 1 goes away. I like this way better.
My question is: Is this just the way versions 2002 vs. 2003 work, or can I change a setting somewhere to make Excel 2002 close its default blank workbook when I open an existing one?
There was an article in ozgrid new about excel custom toolbars (<<hover over). The article addressed making the custom menu option available in one workbook with Private Sub Worksheet modules as follows
Private Sub Worksheet_Activate()
Application.CommandBars("Worksheet Menu Bar").Controls _
("My Menu").Enabled = True
End Sub
Private Sub Worksheet_Deactivate()
Application.CommandBars("Worksheet Menu Bar").Controls _
("My Menu").Enabled = False
End Sub
How do you get the first module to run apon opening the workbook and the second module to run when you close the workbook.
I`m building a macro for which I would like to save a parameter for the macro to read and set.
I would like this parameter to be saved (permanently) in something like a custom workbook property, i.e. Tarabo (=Yes/No).
How can I create/read/wright using vba code?
I have created a macro and would like to use it in other workbooks. Can this be saved to the tool bar for this purpose?
View 2 Replies View RelatedI have created a workbook and made a custom toolbar to perform the macro functions for the sheets in the workbook. Everything works great for me, but I want to attach the custom toolbar to the workbook so that whenever someone else pulls up the workbook they pull up the custom toolbar too.
I used the tools menu, clicked customize, toolbars, attach, selected the custom toolbar and clicked copy.
No toolbar appears.
I can select View, Toolbars, and select the custom toolbar, then the toolbar appears, but when I close the sheet the toolbar remains.
When someone else opens the sheet, the toolbar appears without any "buttons." It is an empty toolbar.
The help text isn't helping because the instructions for attaching a custom toolbar to a worksheet (tools/customize/toolbars/attach/copy) do not attach the toolbar to the workbook.
How can I have a custom defined workbook run a particular macro?
I'm using the Run Application Method:
Application.Run("'Workbook.xls'!Macro")
However the workbook.xls field is static as my program loops through a folder containing various workbooks, opening these workbooks, and running a specific macro housed in their specific module.
Dim MyFile as Object
MyFile = Dir("C:Test")
While MyFile ""
Workbooks.open Filename:="C:Test" & MyFile
Application.Run("'Workbook.xls'!Macro")
MyFile = Dir
How can I define the current active workbook in the run method? Using the custom 'MyFile' in place of the workbook does not work.
Is there a call module method available?
I'm trying to load a custom menu in a workbook to avoid having users to load an add in to use the spreadsheet. I'm trying to add this to the "this workbook" tab but I've never done this.
View 3 Replies View RelatedI have downloaded a custom menu workbook attached. I am wanting to only show the custom menu in one workbook as it appears in all workbooks open at the time.
View 3 Replies View RelatedUsing example code from Adding Custom Menus, I now have functional menu items that call my macros appropriately. The example also contains code to add or remove a menu conditional on its window being active. What I need is a slight variant on this but not quite obvious to my novice brain.
The add and remove menu code is now stored in my personal.xls file. However, I need that the condition check that a key string be present in the name of the active window, not the file where the macro is stored.
Thus, if the front window is of the file named MyData, then the special menus get added (the conditional string is "MyData"). If the window is named YourData, the special menus get removed. Note, neither of these two files contain any macros.
I am building a macro and am just not figuring out how to do this. I am trying to create a new workbook, then give it a name. Simple right? Well, I have the format for the file name to be "mm-dd-yy Transmittal #.xlsx" but I can't figure out how to make the # part of that equation start as 1 but if the file already exists change it to 2, if that exists, change it to 3, and so on. Here's what I have so far:
Code:
Sub Transmittal()
Dim NewBook As Workbook
Dim MyPath As String
[Code]....
I don't think I'm allowed to do "x + 1" so that is probably where my problem is coming from.
I want to create a custom tool bar for a work book but when I right click in the unused part of the tool bar area the only options I get are customize Quick access tool bar and customize the ribbon.
View 3 Replies View RelatedI created 3 custom toolbars. I want toolbar A to be visible only in Workbook A.xls, toolbar B to be visible only in Workbook B.xls and toolbar C to be visible only in Workbook C.xls. while Workbooks A,B, and C are open at the same time. I use Workbook A to automatically open Workbooks B and C.
Problem: Since I'm openning the Workbooks automatically it only keeps the Toolbar C visible on all Woksheets.
I included the following code in the This Workbook Object on each Workbook:
For Workbook A:
Private Sub Workbook_Open()
Application.CommandBars("A").Visible = True
Application.CommandBars("B").Visible = False
Application.CommandBars("C").Visible = False
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.CommandBars("A").Visible = False
Application.CommandBars("B").Visible = False
Application.CommandBars("C").Visible = False..............................
I had made a Workbook with my own command Bars, and everthing is ok .. the problem is when i copy it to anthor pc. i have got an error msg. and when i check the code (debug) i've found the problem is with that command bars ( it's missing )
and now the Q is:
how to copy a workbook with it's all add-in's and customised bars ?
The following code for a custom menu is used in a workbook which has two sheets with
embedded charts, two chart sheets and several sheets for calculations
and information
In This Workbook
Private Sub Workbook_Activate() 'Changed Activate to Open
Run "AddMenus"
End Sub
and
Private Sub Workbook_Deactivate() 'Changed Deactivate to Close
Run "DeleteMenu"
End Sub
and
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Run "DeleteMenu"
End Sub
Is there any way to filter/sort a workbook by a specific text. (EX. Unit 17) I have a spread sheet with 40,000 plus rows and in 1 column it has descriptions. I am needing the filter to filter out all occurrences of Unit 17 and Unit 16. They will not always say the something happened to them. EX Repair brakes on Unit 17 or maybe repair tires on Unit 17...
View 3 Replies View RelatedI am working on building a custom menu and I am looking for the code that would open a specific workbook execute a macro when I select the tab, can this be done????
View 1 Replies View RelatedI cannot figure out how to get my error handler to work, or actually, not work. It seems to work fine when there is an error, but the code still gets read even when there was not an error. Basically, I am trying to open a file, which may or may not be there. When it is not there I want a message to pop up informing the user. However, when the file is there and it opens, the error handler still gives the message box. Any ideas what I am doing wrong?
Private Sub btnOK_Click()
Application. ScreenUpdating = False
Dim LCSfile As String
LCSfile = frmSelectFile.Listbox1.Value
On Error Goto ErrHandler
Workbooks.Open Filename:=sPath & sDate & "" & LCSfile & "QUANT.CSV"
ErrHandler:
MsgBox ("File is not quantitated. Please select another file.")
Application.ScreenUpdating = True
End Sub
I'm a fan of the Excel 2010 table styles, but can't figure one thing out. When I create a table in excel (Ctrl+T), I like to reformat it with a new defined style. When I save the style, I can use it while I'm in that instance of excel, but when I close and reopen excel, the style is gone. How to save the custom formats to they are always available?
View 3 Replies View RelatedI'm trying to make a converter between about 8 various types of values. These are not units like Km or miles or something like that, but rather numbers that represent a specific "hardness value" on a variety of scales (to name a few: HRC, HRA, K)
What I've been doing so far is plotting the two types against eachother and then getting the best trendline I can so that I can use that formula to convert between the two with relative certainty. (for example, when plotting HV vs HRC my fourth order polynomial trendline with an Rsquared of 1 is y=0.0001x4 - 0.0188x3 + 1.0768x2 - 20.709x + 350.69)
My questions comes up where I was hoping to make a window or box of some sort allowing the user to input a numeric value, then selecting the Input units and the hopeful output calculated units, and have the box spit back to the user the conversion.
I want to be able to create a range of VBA userforms to quickly perform long tedious tasks. I want these userforms to be accessed from a nice tidy toolbar.
I have done this and it looks nice and works well. What I would like to be able to do is have my custom toolbar of userform controlled functions be transferable so that if someone else wants my toolbar and attached functions they can install it easily much the same way you can do with an add in.
Is this sort of thing possible or does it require them to manually install all my userforms, modules and toolbar? If it is possible what sort of things should I be looking at?