I've got a large spreadsheet with many cells that need user input. A bunch of calculations are performed on subsequent worksheets, but I want the user to only see the fields they need to enter. I'm trying to write some code that will use a scrollbar (form control, not activex) to only show one group of columns at a time. For example, if ScrollBar1.Value = 1, then show columns "A:D" and hide colums "E:Z". If ScrollBar1.Value = 2, show colums "E:H" but hide columns "A:D" and "I:Z", etc.
Here's the code I'm trying to get going, but I keep getting various errors when I try to execute.
Code:
Private Sub ScrollBar1_Change()
Dim v As Integer
v = ScrollBar1.Value
[Code].....
As it stands now, when I click the scrollbar I get the error: "Compile error. Method or data member not found," and the ".Value" in Line 3 is highlighted.
The key point is that I have over 400 columns grouped in three, offset by one row down for each (this is due to a different formula I have working). Each column is 60 numbers long (not including empty cells above data). I want to copy all of these columns into a single set of three columns on another sheet (Sheet2). (These will be the fifth, sixth, and seventh columns, E, F, and G. If it would be simpler, I could simply copy the third of each set of columns on Sheet1 (C, F, I) to column G of Sheet2. Then there would be a total of 144 columns being copied (60 numbers per column).) All of this copying has to be values-only as the original columns consist of formulas referencing outside cells. Sheet2 should look like this:.............
I must put in descendent order some columns, but the thing is a bit more complicated... As my english is not very good i am gonna explain it with a simple example:
---------------------------------- 1 4 2 5 rabit fox dog cat 2 6 1 3 bird fis wolf mouse ----------------------------------------
Ok, i must order the numbers in a ascendent way, but reordering one number means also reordering its correspondient name (the name of the animals at its right). So, again, with an example you will see it better:
Ordering the first row it must appear like this:
---------------------------------------------- 1 2 4 5 rabit dog fox cat ----------------------------------------------
I didnt know if i had to post it here or in other subforum and either if it can be done with excel.
I have a file with immunophenotypic markers and their relationship to certain blood cells.
What I need to do is search the list and pull out the groups of defining markers for each blood cell. Some of the cells have many markers, some only have one but I need to find which combinations of markers identify each cell if possible.
I'm looking for a way to count groups of alternating rows of "TRUE" values across 3 columns. There will never be an occurrence of more than one "TRUE" value per row. In the sample below, alternating TRUE values occur in rows 4 through 7, so this would be counted with the groups of 4.
I have these kind of matrices (below) and I'd like to identify unique values specific to different groups of columns:
[Code] .........
For instance, in the example above, if we decide that A, B, C are "Group 1" and D, E, F are "Group 2", and that the values in rows 1, 2, 3 are independent (i.e., "x" in "1" is not comparable to "x" in "2", etc): - In condition (row) 1: "x" is a specific value only found in Group 1 - In condition 1: "y" is a specific value only found in Group 2 - In condition 2: "x" is a value found in majority in Group 1 - In condition 3: no specific value can be associated to Group 1 or 2.
What I would like to get is a measure of whether: (1) there are values over-represented in one of the groups, or 100% specific to one group. (2) what are these values (3) if multiple values are a bit tricky, then: what is the value which is the most over-represented in one group compared to the other (the maximum being 100% in one group and 0% in the other)
How to convert multiple Rows recors to a single row record in a Notes(csv) format? Have update my xls file. My source is in the below format(Source.xls):
As you can see only GroupNameN, and Name_N are varibles, the rest of the fields are static. note that there is opening and closing quota for column "E" and "F" in output.xls
I realize that the easier resolve to this request is to use Access & we are moving to that application.
I have included a worksheet as an example.
We have a 'work in progress' (WIP) worksheet that contains 12 rows of data per job. Need to know how (or if) you can sort by the "Job #:" value while maintaining the group of information necessary for each individual job.
Not a normal sort because the values aren't entered in typical side-by-side row & column format.
I am filtering the data displayed in a chart by hiding columns. I would also like to filter the X-Axis labels by hiding columns. If I do this manually I have no problems but when I run the following macro the chart gives a reference error for the X-axis labels.
Sub ShowA2() Application. ScreenUpdating = False num = Sheets.Count Sheets("X-Axis").Activate Range(Columns(1), Columns(256)).Select Selection.EntireColumn.Hidden = False For a = 1 To 5 Sheets(num - a).Activate If ActiveSheet.Name = "A2 Data" Then Columns("A:Q").Select Range("A10").Activate Selection.EntireColumn.Hidden = False Sheets("X-Axis").Activate Columns("A:E").Select......................
I have a very large spreadsheet that I work in and then print from. When I print, I need to hide about 20 columns which I do manually. I am curious if there is a way I can do this easier. If I could somehow filter columns, or set mutliple columns to a name for a dopr dowm box, or possibly a macro.
I am trying to use an IF formula to do the following for each row in a large spreadsheet: If the value in column W = 0, show columns A,B,C and E. I have one formula I've used that doesn't work, but as posting what I think is the correct answer could get my post deleted, I won't put it here.
I have a table with numeric information with only one column in the table having text information ( which is basically notes from a telephone conversation). My question is how can you add a scroll bar in a cell with text information. I do not want to resize the row height as it makes my table look untidy.
I have Userform with Combobox for listing all days of active worksheet. Worksheet is very long and I would like sheet to scroll left or right, according to what day I pick from Combobox. Days on worksheet are listed in range from E2:AI2.
I have a Combolist box that has 39 entries. The screen isn't big enough for the entire list to be shown when the box is clicked and it truncates the top of the list. How can I add a scrollbar to this?
On a userform, is there a way in which to set a scrollbar's slider postion to the ListIndex value of the item chosen in a ComboBox?
In other words, if the total ListCount for this choice is is ten, and the item chosen in the Combobox is in the fourth position, can the scrollbar slider automatically be set to the fourth position rather than be all the way to the left or right? I would think that this would make it visually easier for the user to understand in which direction they can scroll the list. Here's what I've got so far:
I am trying to get a scrollbar on a MultiPage UserForm to provide instant results on the active spreadsheet. The spreadsheet is full of charts, and as you move the scrollbar, the charts change. Trouble is, the code I have is VERY slow. Moving the scollbar turns the cursor into an hourglass and that little scrollbar graphic lags about a centimeter behind. Is there faster code out there?
Here is what I have:
NOTE I use both the change event and the Scroll event because using only one gives me only half the functionality of the scrollbar...that is, without both, either the arrows on the scrollbar work or only the slider works.
I want a control to be updated when I scroll a scrollbar. The scrollbar is linked to "B25" and the control, tboYYWW2, is then updated via a HLookup of the "B25" value. By the code below I just get the control updated when the worksheet is activated and not when the "B25" value is updated by the scrollbar. How to make this work ? I also attach the workbook file I'm doing the tests in.
Private Sub Worksheet_Activate() Dim varYYWW2 As String Dim varWeekNr2 As Integer varWeekNr2 = Range("B25") varYYWW2 = WorksheetFunction.HLookup(varWeekNr2, Worksheets("EDUtest").Range("WeekNrWeek2"), 3) tboYYWW2 = varYYWW2 End Sub
I have scrollbar control on excel sheet, I want to make maximum value of this control to be linked to a cell on the sheet. So, when the cell value changes, the scrollbar maximum changes automatically with this value.
I have a TextBox in a Worksheet with a ScrollBar defined and its working perfectly! The only problem is that everytime I click outside the TextBox, the ScrollBar goes to the lowest position and I only can see the bottom of the text in the TextBox...
Is there any way of keeping the ScrollBar on its position everytime I click outside the TextBox?
I've come across a spreadsheet where certain rows and columns (typically top rows or left columns) are hidden; however, there's no way to unhide them (the unhide function is grayed out) and it doesn't seem to be protected or no visible macros/vba on the file.
I have a spreadsheet that has 28 columns for time entries. Typically only the first 12 columns are used, so I would like to hide the remaining 16 columns (which makes the spreadsheet much more user-friendly). It would probably be nearly impossible to teach all of them how to Unhide the remaining columns (and re-Hide), plus I would like to use the full-screen function when employees enter thier times. I would like to use a form control in the column heading so that when the employees 'check' it, it will Unhide and then re-Hide the columns. Any way to do this? Seems like a VB thing to me (out of my league, but would be happy to add one in!).
I have created this macro (below) in a standalone spreadsheet and the expected results are that Columns A,B,C,D,G,H will be displayed after I run the macro.
But when I use the same macro in my production worksheet (columns and ranges adjusted accordingly) this macro creates the following results: Column A is displayed and all the rest are hidden (B,C,D,E,F,G,H). I am stumped as to why this occurs. Can you advice me as to how to get this macro to work and display A,B,C,D,G,H ?
I'm using Excel 2003 and want to hide columns D:E & I:J. I have script as follows which hides I:J but I am unsure how to get it to include the other 2 columns.
I once saw an excel sheet where I could hide or unhide a section by some + and - signes above the column-letters.... I have searched for this but I only get the ordinary hide/unhide solutions.
I'm attempting to put code in that will hide 2 individual columns when a particular cell in another column has no value in it. The cell, however, has a formula in it, and I'm not sure if that is my issue.
Essentially, if the formula in A32 returns a value, I need columns M and P to Hide. If it doesn't return a value, I need them to stay put. The value returning in A32 is a number, but it can be treated as text as it is an ID number and is not needed for any calculation.
Here's how I have it set up now:
Private Sub Worksheet_Change(ByVal Target As Range) If Range("A32") "" Then Columns("M","P").EntireColumn.Hidden = True Else Columns("M","P").EntireColumn.Hidden = False End If End Sub
