I have scrollbar control on excel sheet, I want to make maximum value of this control to be linked to a cell on the sheet. So, when the cell value changes, the scrollbar maximum changes automatically with this value.
View 3 RepliesWhen I draw a vertical Scroll Bar and set the Min and Max in Properties, the Min gets set at the top of the Scroll Bar and the Max at the bottom. This seems backward to me, but it's probably an issue with Microsoft's programming. To get around this, I've entered the Max value in the Min and the Min's value in the Max. This allows the Max value to be at the top of the Scroll Bar and the Min at the bottom, but I was wondering if this is anathema in the world of coding, and could I be setting myself up for coding problems down the road?
View 2 Replies View RelatedI have just encountered a very peculiar problem when using Scrollbar_Change Event for Controls Scrollbar (in a worksheet). I have tree scrollbars and assigned Event code for each one: ScrollBar1_Change, ScrollBar2_Change and ScrollBar3_Change.
Events works perfectly when I click on the arrows to adjust the scrollbar. What is strage however, event is not executed when I adjust the scrollbar itself (pulling the bar with a mouse) if I try it first time after adjusting another scrollbar. In such situation Scrollbar is adjusted on the screen, even linked cell is changed, but the Change Event is not executed. But when the same scrollbar is adjusted second time Change event is executed. To sum up: Scrollbar_Change event is not executed when adjusting the scrollbar with the mouse the first time after "switching" from one scrollbar to another, but is works perfectly in any other situation. It has nothing to do with the code istelf. I get this effect when I create a new workbookm add 3 scrollbars and a code like:
Private Sub ScrollBar1_Change()
MsgBox "ScrollBar1 changed!"
End Sub
Private Sub ScrollBar2_Change()
MsgBox "ScrollBar2 changed!"
End Sub
Private Sub ScrollBar3_Change()
MsgBox "ScrollBar3 changed!"
End Sub
What may be the cause of this selective "disobedience"? Note also, that I get this error on Excel 2000 (not tested it on Excel XP or 2003).
I have a userform created with 27 textboxes that corrispond to columns A through AA. What I am trying to do is when the form is loaded, I want to have all the textboxes populate with the information accross row 2. Using a scroll bar, I want the user to be able to scroll through the entries so that when the user scrolls down, all textboxes change to the information in row 3, 4, 5 etc.
Ultimatley, this is a data entry form, allowing the user to lookup and edit entries on the page. I can figure out how to do everything I need, witht he exception of the scrollbar.
I'm amtepting to populate some labels from some predefined strings based on the scrollbar value. I have these codes:
Option Explicit
Public Meddelande1 As String, Meddelande2 As String, Meddelande3 As String, Meddelande4 As String, Meddelande5 As String, Meddelande6 As String, Meddelande7 As String, Meddelande8 As String, Meddelande9 As String
Private Sub UserForm_Initialize()
On Error Resume Next
Workbooks("Kontrollsystemet.xls").Close SaveChanges:=False
Application. ScreenUpdating = False
Workbooks.Open "V:allaBeredningKontrollsystemetKontrollsystemet.xls", ReadOnly:=True
Sheets("Meddelanden").Activate
Meddelande1 = Range("B2").Text
Meddelande2 = Range("B3").Text....................
From A1:A500, I have data with different numerical values. I want to be able to use a corresponding column and rows (example: B1:B500) where I can enter formula where maximum values where be reported. This I would like to change with a simple change of a single cell value (example: C1). So, If C1 has a value of 10, it will be used from every b cell to create a maximum value that would use a range going back only 10 cells for A.
View 9 Replies View RelatedI was wondering if there was a way of reducing the maximum characters allowed in a cell reference.
I am creating a form which Bank details need to be entered and would like to only allow a possible 16 characters.
I was hoping that my formula would give me the count number based on the Maximum time (latest time) and the Name field...My result is a 0 instead of 62 (the correct answer).
=SUM((Download!$H$2:$H$10=A4)*(Download!$D$2:$D$10=MAX(IF(Download!$H$2:$H$10=$A4,Download!$D$2:$D$1 0)))*Download!$I$2:$I$10)
Would a Index/Match/MAX function be more efficient?
Look in Column E and find the MAX value. Once you find the MAX value, (let's say E27) display the date that's in C27. I bet this is really easy but I've been screwing around with it for over a half hour and can't get the correct result.
View 2 Replies View RelatedI have two columns of data. The first column is the 'type' and the second column is the 'value'. I need to find the maximum 'value' for each individual 'type'
The 'types' are not necessarily next to each other and the data cannot be sorted to do so.
Example:
type value
A 15
B 6
A 21
C 7
B 13
I need to be able to say the MAX for 'A' is 21, the MAX for 'B' is 13 and the MAX for 'C' is 7.
I need to just highlight the maximum value in a column. This will be for several excel sheets within powerpoint, and preferably automatically updated?
Something along the lines of:
VB:
If
Ax = Max(A1:A3)
Then Ax = red
Else = white
End
can u hide the xl vertical scrollbar or stop it working
View 4 Replies View RelatedI have a table with numeric information with only one column in the table having text information ( which is basically notes from a telephone conversation). My question is how can you add a scroll bar in a cell with text information. I do not want to resize the row height as it makes my table look untidy.
View 1 Replies View RelatedI have Userform with Combobox for listing all days of active worksheet. Worksheet is very long and I would like sheet to scroll left or right, according to what day I pick from Combobox. Days on worksheet are listed in range from E2:AI2.
How could I do that in VBA ?
I have a Combolist box that has 39 entries. The screen isn't big enough for the entire list to be shown when the box is clicked and it truncates the top of the list. How can I add a scrollbar to this?
View 2 Replies View RelatedOn a userform, is there a way in which to set a scrollbar's slider postion to the ListIndex value of the item chosen in a ComboBox?
In other words, if the total ListCount for this choice is is ten, and the item chosen in the Combobox is in the fourth position, can the scrollbar slider automatically be set to the fourth position rather than be all the way to the left or right? I would think that this would make it visually easier for the user to understand in which direction they can scroll the list. Here's what I've got so far:
I am trying to get a scrollbar on a MultiPage UserForm to provide instant results on the active spreadsheet. The spreadsheet is full of charts, and as you move the scrollbar, the charts change. Trouble is, the code I have is VERY slow. Moving the scollbar turns the cursor into an hourglass and that little scrollbar graphic lags about a centimeter behind. Is there faster code out there?
Here is what I have:
NOTE I use both the change event and the Scroll event because using only one gives me only half the functionality of the scrollbar...that is, without both, either the arrows on the scrollbar work or only the slider works.
I want a control to be updated when I scroll a scrollbar. The scrollbar is linked to "B25" and the control, tboYYWW2, is then updated via a HLookup of the "B25" value. By the code below I just get the control updated when the worksheet is activated and not when the "B25" value is updated by the scrollbar. How to make this work ? I also attach the workbook file I'm doing the tests in.
Private Sub Worksheet_Activate()
Dim varYYWW2 As String
Dim varWeekNr2 As Integer
varWeekNr2 = Range("B25")
varYYWW2 = WorksheetFunction.HLookup(varWeekNr2, Worksheets("EDUtest").Range("WeekNrWeek2"), 3)
tboYYWW2 = varYYWW2
End Sub
I have a TextBox in a Worksheet with a ScrollBar defined and its working perfectly! The only problem is that everytime I click outside the TextBox, the ScrollBar goes to the lowest position and I only can see the bottom of the text in the TextBox...
Is there any way of keeping the ScrollBar on its position everytime I click outside the TextBox?
I have been using a scroll bar in my project to select a value from 0 - 3
Is it possible to have a customised slider (whether a form control or something created from scratch) whereby the numbers 0 1 2 3 are displayed in a grey, red, yellow and green box respectively adjacent to eachother and a slider can be moved over the top to select a value?
I've got a formbox that has scrollbars and when the userform starts up the vertical scrollbar is centred, meaning people can't see the top of my form. How do get the scrollbar to be at the top when my form loads?
View 2 Replies View RelatedI've got a large spreadsheet with many cells that need user input. A bunch of calculations are performed on subsequent worksheets, but I want the user to only see the fields they need to enter. I'm trying to write some code that will use a scrollbar (form control, not activex) to only show one group of columns at a time. For example, if ScrollBar1.Value = 1, then show columns "A:D" and hide colums "E:Z". If ScrollBar1.Value = 2, show colums "E:H" but hide columns "A:D" and "I:Z", etc.
Here's the code I'm trying to get going, but I keep getting various errors when I try to execute.
Code:
Private Sub ScrollBar1_Change()
Dim v As Integer
v = ScrollBar1.Value
[Code].....
As it stands now, when I click the scrollbar I get the error: "Compile error. Method or data member not found," and the ".Value" in Line 3 is highlighted.
Let's say my horizontal scrollbar is 2/3 of the way to the right and I'm currently viewing columns EA thru EZ. If I turn on VBA macro recording, the Excel auto-generated VBA macro code that gets saved when I press Ctrl-Home is Range("xx").Select, where "xx" upper-left-most cell based on frozen panes [e.g. Range("T3").Select]. While recording the macro, when I press Ctrl-Home my Excel view horizontally scrolls all the way to the left such that cell T3 is selected such that I'm now viewing columns T thru AS (which is what I want). If I start with the horizontal scrollbar 2/3 of the way to the right again and I use Range("T3").Select in a VBA macro, cell T3 gets selected like before -- but Excel doesn't horizontally scroll all the way to the left to where I would be viewing columns T thru AS; it just stays with columns EA thru EZ in view. Is there some way to force the horizontal scrollbar all the way to the left with VBA code? I tried searching the FAQ and didn't find anything there. I'm using Excel 2007 on a Windows7 PC.
View 2 Replies View RelatedI am using excel2000 on WindowsXP. I have a 2D surface plot pointing to data that can be continuously updated using a scrollbar from the Forms toolbox. For some reason, when I place the plot over the continuously changing cells, the plot does partially update when I scroll, and then fully refreshes once I let go of the scrollbar handle. If I move the plot far from the changing cells, it doesn't refresh at all until I let go of the scrollbar, so I'm forced to use it to page, instead of smoothly scroll. How can I get the whole surface to refresh continuously? Seems some kind of magic "event" logic is at work here....
View 9 Replies View RelatedI have a scrollbar and a textbox for selecting a value. Everything works fine but it's irritating when someone types 100,000 into the textbox then decides to increment or decrement using the scrollbar. The position of the scrollbar doesn't change with the textbox so (supposing the previous value was 5000 and set using the scrollbar) instead of making adjustments to 100,000 it jumps to 5000 and makes adjustments there.
Private Sub BootstrapScrollBar_Change()
BootstrapTextbox.Value = Format(0, "0")
BootstrapTextbox.Value = BootstrapTextbox.Value + BootstrapScrollBar.Value * 100
End Sub
Private Sub BootstrapScrollBar_Scroll()
BootstrapScrollBar_Change
End Sub
I've tried doing something like making a sub for changes to the textbox with code like BootstrapScrollBar.Value = BootStrapTextbox.value but I keep getting the error "error 308, could not set value".
So is there a way to have the position of the scrollbar tied to the value in the text box?
I currently have an ActiveX scrollbar on a spreadsheet that's tied into a chart. Move the slider on the scrollbar, and the chart instantly updates.
I then put a scrollbar on a muli-page UserForm and the chart will only update after the form is closed. Is there a way I can get the chart to update instantly just like with the ActiveX control?
I need to know when the SmallChange and LargChange have been trigered, scrollbars donīt support this events
View 2 Replies View RelatedThe webbrowser control has a scrollbar regardless of whether or not it is needed. I would like to disable the scrollbar completely, but there does not seem to be anyway to control this.
View 7 Replies View RelatedI am attempting to merge a scroll bar and an activeX text box. I currently have a horizontal scroll bar that links to a cell with values from 1-20, A dynamic label in the adjacent cell changes when the scroll bar moves. I need the label to be inside the scroll bar track/tray. I was told an activeX text box would do the trick. However, i am new to VBA and activeX text boxes any code or solution to this problem. Conditions:
The slider and the track should overlay the text box label
The track should be transparent but on top of the label
The label should be a perfect fit to the slider's tray
Here is a reference to the scroll bar labels. I have posted an example file of what i am attempting to achieve.
I can't seem to find the answer to this question. I have a sorted list of data 3 cells wide, 120 cells long. I wish to have this data put into a scroll bar so I may scroll the data, select, and it will output to a chosen cell.
I assume the ScrollBar control is the choice but since I have no experience with any controls, I am at a loss. I have thus far only managed to insert the scrollbar, click on the properties and then I'm ?.
1. How do I specify the range of cells to display?
2. How do I specify an output cell after selecting from the list?
I've attached a spreadsheet to view the data.