I have a table (approx 10 rows x 10 columns) that I am trying to lookup. I have to first look across the top of the table (cols 2-10) to find a name, then look down for a value (exact match) within than array and then find the corresponding value (in that position) in the 1st column. I have used 'name manager' to name these arrays (in columns, rows 2-10).
I have setup the names of the arrays with a drop down list (as per some utube videos). When I try to evaluate the match function (with the array name as a cell reference) i get #value. When I directly type in the name of the array into the match function I get a correct answer.
Should I be using other functions such as indirect, choose, etc instead?
I have two columns both of which lengths will vary depending on the time-frame entered by the user but will be the same as each other for each run of the code. Because of that, I'm trying to create a named range for each column and then execute an Index Match with an Offset off of it. Below is my code which results in an "Object required" error message.
Code: Dim Ticker As Long, Tick As Range, TIK As Range, RoleDt As Long, RD As Range, endDate As Variant Ticker = Range("F" & Rows.Count).End(xlUp).Row RoleDt = Range("E" & Rows.Count).End(xlUp).Row Set TIK = Range("F2:F" & Ticker) Set RD = Range("E2:E" & RoleDt) cell.Formula = "=INDEX(RD,MATCH,(RC[-1],TIK,0)+1)"
Column A contains State names; column B contains a few cities for each of the states. Row 1 contains rank as the header row. Then the table begins in cell C2 with the rates. I have two of these (on separate sheets), one titled w dep (with dependants) and the other w-o dep (without dependants). On a third sheet I have 4 combo boxes.
1.Chooses between Dep or W-O Dep 2.Chooses Rank 3.Chooses State 4.Chooses City
Here are my questions. •How can I filter down the cities so that if I chose Texas for example, only the cities from Texas would show up in my combo box?
•I have figured out the formula to display the results from the w dep sheet but cannot get the information from the w-o dep sheet. Here is the formula I’m using.......
I need to create a macro to find matches between multiple specific workbooks and a named range. I am new to macros and am very confused. After searching the forums here, I am still lost, even though they are very informative. So far,I have created a Dynamic Named Range called NamesList
that selects the cells which I update manually each day. Once I have updated the list of names, I need to create a macro that will decide whether or not the names in the dynamic named range CurrentDay (located in workbookA) already exist in workbookB. The macro needs to create a list of the which names already exist in the workbook, and which do not. For the names that do not exist in workbookB, I then need to search workbookB and workbookC for matches, again creating a list of results. Until now I have been manually using Ctrl + F (Find Method)and going down my list of names to search through each workbook.
As far as I can tell, the formula works just fine. If you look in the Name Manager and check on that Name, the highlighted box shows up exactly what it should and if you do a simple MAX test, it displays the correct MAX value from that range.
The problem comes in when I try and add it to a chart. Instead of a displaying all the values in the range, it displays nothing. Doesn't flag up any errors, just nothing.
The reason I chose to do it this way is that the table contents could change on a daily basis and so could the position of the row and I don't want to have to keep changing the references in the graph so make sure the right data is being displayed. Is it just that charts don't play well with the INDIRECT function?
I use the standard OFFSET-COUNT-MATCH method to create dynamic named ranges in my Excel projects. Needless to say, this method won't work on a spreadsheet with formulas extending beyond the current range. The count function counts the cells containing formulas, even though they may contain no data. Does anyone know how to construct a formula that will IGNORE the "formula only" cells??
I am having a hard time getting my match functions to work with letters and numbers in the same range. I am also trying to figure out a way to have the ranges switch if there is an error. because the data is in multiple columns. It is hard to explain so I have attached a sample workbook.
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
I am getting a #REF error when using an INDIRECT function within a MATCH function to check against a dynamic named range. Basically, I am trying to get the row reference so that I can go back and extract other data from the row (in a table contained in another sheet) into the current worksheet.
I attach an example file for reference. The issue arises when a Dynamic Named Range is used. In the example file, if a value from a static range is chosen, the match with indirect function works, but it fails with the dynamic range.
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
I am trying to make a UDF that searches for a header, grabs everything under the header, and pulls it somewhere else. My UDF has three parameters:
1) Output_Range: the named range where the parameters will be pulled to 2) Header: the header to search for in order to copy the data underneath it 3) WorkbookName: the name of the workbook to search in
It looks like this:
VB: Function LoadParameters(Output_Range As Range, Header, WorkbookName As String) MyTimer = Timer 'Defining the variables. Dim HeaderCell, HeaderCellEnd, HeaderRange, Output_Range
I have some named ranges that refer to 5 pieces of data organized into a row. For example, the name MyNamedRange might refer to $C$5:$C$10.
I am trying to loop through each column and get the values in MyNamedRange, then change corresponding values in a different named range. However, when I try to use Offset to access the subsequent columns of MyNamedRange, it doesn't work. It only gets the value of the first column right, the rest return <EMPTY>.
How do I go about using named ranges instead of cell names(ie A4:A9)
Private Sub UserForm_Activate() Dim lngRow As Long Dim intIndex As Integer UserForm1.ComboBox1.Clear 'Clear combobox lngRow = 2 Do While Sheet1.Range("a" & lngRow).Value <> "" For intIndex = 0 To UserForm1.ComboBox1.ListCount - 1 If UserForm1.ComboBox1.List(intIndex) = Sheet1.Range("a" & lngRow).Value Then Goto NextRow End If Next intIndex UserForm1.ComboBox1.AddItem Sheet1.Range("a" & lngRow).Value NextRow: lngRow = lngRow + 1 Loop End Sub
I wanted to change "a" to the defined range "search"?
the code to add two independent named ranges cell by cell in vba. Both of the named ranges have the same structure and the sum would be posted to a third area of the same structure cell wise.
At the moment I have to click in the cell and then look at the cells used and look across to the title of the rows.
So for example, performance = D3*D4*D5*D6
I would like, performance = vehicles*availabliity*utilisation*TKM.
That is easy if I have just 1 option. But what if I have 3 options? Naming each cell would be a way to do it but pretty laborious, is there a 'smart' way to use named ranges here?
I'm creating a KPI spreadsheet which utilizes named ranges to allow for Dynamic charting. I've created the first data input sheet for one of the 10 areas being KPIed. The sheet has 60 named ranges in it.
The goal is to duplicate the existing sheet (Area 1A) 10 times and adjust the named ranges and formulas within the named ranges according to the sheet names.
Is there a way to accomplish this without having to manually recreate or edit every named range for each new sheet?
I want a sumIF function (based on three criteria) to fill the values of cells in a column so long as there are values in the cells in the column before that one. I was working with trying a loop, but have been shown a faster way is using the With function.
There are four named ranges that all exist on a separate sheet in the file: Crude, Location, Year and Volume. Based on the first three columns of the file I wish to have an output for the sum of volume based on crude, location and year.
Right now, my output simply returns the total sum of the "volume" range in each cell in the output column.
For example, if total sum of values in the volume column is 100 then my output column currently looks like:
I created a simply macro that will adjust the headings of a group of cells as follows.
But if I add a row/column to the sheet, it will then of course attempt to place the headings in the wrong cells.
I have now given that group of cells/range a Name of "AR_Buckets". But I'm not certain how to modify the macro to ensure it always places the information in the correct place.
I am having problems getting the code below to follow my intentions. I have 2 files. I have a temporary file that holds all the data that I need. I have a destination file that needs to have data copied into it. In the temp file, I have data for several dates and product types. What I intend to do is to do a vlookup in VBA to look for the date and the product type in the temp file and copy the appropriate data to the destination file. I have numerous named ranges both in my temp file and my destination file. For the code below, I wanted to make a loop to find the date in the temp file that is listed in the destination file. Once this is done, I wanted to find the product type in the temp file that is listed in the destination file. If both conditions exist, then copy a certain range from the temp file to the destination file. My intention is evident in the code, but I don’t think that I am putting in the correct “code format”.
(Using Office 2003 on XP Pro) I have two named ranges that I want to union into one big named range so that I can use the big named range in a validation table. Unfortunately the big range does not appear on the list of named range so I switched to VBA to try and lick this but really I was hoping a non-VBA solution exists. Exploring possible VBA solutions, here is what I have so far:
I'm trying to make my worksheet generate a bunch of named ranges whenever it is activated. However, I'm getting a "Not a valid name" error on the line in red. The value of r is a string, so I really don't see what the issue is. Another time, I got a object defined error, but I think I've declared everyhing too. That line is very similar to the line above, and tends to work once (the first time around the loop). After that, I get the errors I mentioned.
I have two named ranges, LV1 and LV2 and wish to select them for printing. If the ranges were fixed I would use - Range("A2:H4,A8:H10").Select - how do I do the equivalent using the named ranges in vba?
The worksheet contains 20 different datasets which are divided into separate 30 x 10 grids, all of which help comprise a larger 300 x 20 grid. I have defined each smaller grid/dataset as its own named range. Originally the entire dataset started in A1, but I am shifting it dataset down by 40 lines to create space to work at the top of my workbook.
I am wanting to create a data validation list in A1, then have cells A3:J32 populate with the named range I select in A1. However I also want this populated dataset at the top of the sheet to be a mirror -- not a copy.
Therefore once I have the data in my range available A3:J32, anything I manipulate would be mirrored in the original range in the lower portion of the workbook.
I am importing an external Sheet into my Excel workbook but it only imports the data not the named ranges. I need the named ranges to be imported and overwrite any existing range of same name.
Example:
In existing workbook Sheet I have a named range, ABC which is A1:E10 - in the Sheet I am importing the ABC range is A1:E12. So when I have done import I want named range ABC in my workbook to become A1:E12 (as per external Sheet).
This is the code that import data (but not named ranges)
