Utilizing Match & Index With Two Named Ranges
Sep 8, 2009
Column A contains State names; column B contains a few cities for each of the states. Row 1 contains rank as the header row. Then the table begins in cell C2 with the rates. I have two of these (on separate sheets), one titled w dep (with dependants) and the other w-o dep (without dependants). On a third sheet I have 4 combo boxes.
1.Chooses between Dep or W-O Dep
2.Chooses Rank
3.Chooses State
4.Chooses City
Here are my questions.
•How can I filter down the cities so that if I chose Texas for example, only the cities from Texas would show up in my combo box?
•I have figured out the formula to display the results from the w dep sheet but cannot get the information from the w-o dep sheet. Here is the formula I’m using.......
View 3 Replies
ADVERTISEMENT
Sep 19, 2013
I have two columns both of which lengths will vary depending on the time-frame entered by the user but will be the same as each other for each run of the code. Because of that, I'm trying to create a named range for each column and then execute an Index Match with an Offset off of it. Below is my code which results in an "Object required" error message.
Code:
Dim Ticker As Long, Tick As Range, TIK As Range, RoleDt As Long, RD As Range, endDate As Variant
Ticker = Range("F" & Rows.Count).End(xlUp).Row
RoleDt = Range("E" & Rows.Count).End(xlUp).Row
Set TIK = Range("F2:F" & Ticker)
Set RD = Range("E2:E" & RoleDt)
cell.Formula = "=INDEX(RD,MATCH,(RC[-1],TIK,0)+1)"
View 9 Replies
View Related
Nov 12, 2008
Is it possible to use Match to find a value within a Named range and then, based on that value, use Match and Index again to find a value two columns across?
I have a list of clients in Column A, with 10 cells between each. In Column B, I have a list of currencies (the same currencies next to each client) and in Column C the rate this client pays for this currency. I want to reference these rates from an external workbook. Is there any way to use Match to locate the client name, then use Index/Match to locate the rate for a particular currency, somehow telling Excel where to look the second time?
View 10 Replies
View Related
Apr 21, 2013
I have a table (approx 10 rows x 10 columns) that I am trying to lookup. I have to first look across the top of the table (cols 2-10) to find a name, then look down for a value (exact match) within than array and then find the corresponding value (in that position) in the 1st column. I have used 'name manager' to name these arrays (in columns, rows 2-10).
I have setup the names of the arrays with a drop down list (as per some utube videos). When I try to evaluate the match function (with the array name as a cell reference) i get #value. When I directly type in the name of the array into the match function I get a correct answer.
Should I be using other functions such as indirect, choose, etc instead?
View 9 Replies
View Related
Apr 3, 2014
I have two files
Say first file name is X and in work sheet 1 i have used name manager for two columns say "Series" and "Fund name"
Second file name is Y
R7C3 is Fundname of Y file
RC4 is Series Value of Y file
In the row of Y file , C 15 - I want to calculate the formula
Range("C15").FormulaArray = _
"=IF(ISNA(INDEX(Series,MATCH(R7C3&RC4,Fundname&Series,0))=RC4),""NO"",""YES"")"
I am not getting any error but the result is not correct , even for the series which is not there in my file "X" it says "YES"
See my codes below :
Dim colA As Variant
Dim colB As Variant
Dim WksDash As Workbook
Dim Wksfile As Workbook
Dim wksWatch As Worksheet
Dim WksDash2 As Worksheet
Dim Classunion As Variant
[Code] .....
View 2 Replies
View Related
Dec 28, 2006
B2 contains CITYNAME
A2 contains The name of the TAB the data relates too (although i cant find anyway of using this cell within a formula to read the relevant tab, maybe you know of a way)
This is the working code i currently have in cell B3, this is what i need to enhance.
=SUM(INDEX(ABCD!$1:$65536,0,MATCH(B2,ABCD!$1:$1,)))
This looks at the tab ABCD and sums all the values it finds in the column that matches the name supplied in cell B2 on Sheet1
Tab ABCD has dates within coulmn A, and Values in Column B, first row from Column B to Column Z contains the CITYNAME (coumn Z may become longer so this needs to be able to cope with that too.
What i would like to do is add into this an extra requirement, there must be a start and end date. I still need to use the match function as B2 changes using a drop down validation (containing CITYNAMES, these represent the columns within the tab ABCD
E1 Contains the STARTDATE
H1 Contains the ENDDATE
This is the closest I get, changing the start and end date does not give the expected result...
=SUM(--(ABCD!$1:$65536>=E1),--(ABCD!$1:$65536
View 9 Replies
View Related
Dec 6, 2006
I need to create a macro to find matches between multiple specific workbooks and a named range. I am new to macros and am very confused. After searching the forums here, I am still lost, even though they are very informative. So far,I have created a Dynamic Named Range called NamesList
=OFFSET(CurrentDay!$B$2,0,0,MATCH("*",CurrentDay!$B:$B,-1),1)
that selects the cells which I update manually each day. Once I have updated the list of names, I need to create a macro that will decide whether or not the names in the dynamic named range CurrentDay (located in workbookA) already exist in workbookB. The macro needs to create a list of the which names already exist in the workbook, and which do not. For the names that do not exist in workbookB, I then need to search workbookB and workbookC for matches, again creating a list of results. Until now I have been manually using Ctrl + F (Find Method)and going down my list of names to search through each workbook.
View 2 Replies
View Related
Sep 26, 2011
I am trying to do index match function with criteria ranges in another worksheets. The code kept on giving me " #Value!"..
Here is the code:
Sub test1()
Dim myvalue As Variant
Dim wsname As String
Dim i As Integer
Dim j As Integer
Dim r1 As range
Dim r2 As range
Dim r3 As range
Dim r4 As range
wsname = "CustomerIDbyParts"
[Code] .......
The resulting cell of F5 kept on returning #Value!.. I suspect that my syntax for looking up the ranges from another worksheet is wrong?
View 3 Replies
View Related
Dec 17, 2012
I am having an issue when I try a chart a named range. The named range "Refers To" is
Code:
=OFFSET($A$1,(MATCH("Kevin",$A:$A,0)-1),,,COUNTA(INDIRECT(ADDRESS((MATCH("Kevin",$A:$A,0)-1),1,1,1)
&":"&ADDRESS((MATCH("Kevin",$A:$A,0)-1),100,1,1))))
As far as I can tell, the formula works just fine. If you look in the Name Manager and check on that Name, the highlighted box shows up exactly what it should and if you do a simple MAX test, it displays the correct MAX value from that range.
The problem comes in when I try and add it to a chart. Instead of a displaying all the values in the range, it displays nothing. Doesn't flag up any errors, just nothing.
The reason I chose to do it this way is that the table contents could change on a daily basis and so could the position of the row and I don't want to have to keep changing the references in the graph so make sure the right data is being displayed. Is it just that charts don't play well with the INDIRECT function?
View 4 Replies
View Related
Dec 25, 2008
I use the standard OFFSET-COUNT-MATCH method to create dynamic named ranges in my Excel projects. Needless to say, this method won't work on a spreadsheet with formulas extending beyond the current range. The count function counts the cells containing formulas, even though they may contain no data. Does anyone know how to construct a formula that will IGNORE the "formula only" cells??
View 3 Replies
View Related
Apr 28, 2014
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
View 6 Replies
View Related
Oct 8, 2009
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
View 9 Replies
View Related
Jun 2, 2006
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies
View Related
Mar 14, 2013
Merge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
View 3 Replies
View Related
Oct 8, 2009
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies
View Related
May 23, 2014
We know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
View 5 Replies
View Related
Jan 21, 2014
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
View 3 Replies
View Related
Feb 4, 2014
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
View 3 Replies
View Related
Aug 28, 2012
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
View 5 Replies
View Related
Jul 11, 2008
INDEX/MATCH multiple ocurence match values needed
View 9 Replies
View Related
Jun 10, 2009
Is it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.
View 10 Replies
View Related
Jan 15, 2013
I couldn't resolve the formula of Index-Match for getting the values that matches the following criteria
1) Match the "Category" of Table 1 to Table 2
2) Match the "value" of Table 1 to Table 2, if value is not present in Table 2 take the upper closest value.
Once the above conditions are met, Take the Result from Table 2
Table 1 is for Input and Table 2 is for Database.
Please note that Data in Table 2 should not be sorted in any way. I tried to use the -1 option of the Match function for upper closest value but it didn't work out.
Have a look at the file attached : IndexMatchUpperClosestValue_AlongwithExactMatch.xlsx
View 3 Replies
View Related
Oct 6, 2009
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies
View Related
Sep 27, 2007
I am looking to sum the values found at the intersection of multiple values based upon a vertical and horizontal lookup. The formula I am trying is as follows (which results in #Value):
{=IF(ISBLANK(G$9),"",SUM(IF(INDEX('Journal'!$A$20:$Z$1020,MATCH("Prior",'Journal'!$F$20:$F$1020,0),MATCH(G$9,'Journal'!$H$19:$Z$19,0)),"")))}
View 9 Replies
View Related
Nov 14, 2008
I'm trying to use the INDEX function to return a value from a named range. But I'm not directly typing the named range into the INDEX argument. Instead, I'm grabbing the named range from a vlookup table (essentially, another named range). So, if "vh" is the name of the named range, I'm not using the formula:
View 14 Replies
View Related
Sep 15, 2014
I am trying to make a UDF that searches for a header, grabs everything under the header, and pulls it somewhere else. My UDF has three parameters:
1) Output_Range: the named range where the parameters will be pulled to
2) Header: the header to search for in order to copy the data underneath it
3) WorkbookName: the name of the workbook to search in
It looks like this:
VB:
Function LoadParameters(Output_Range As Range, Header, WorkbookName As String)
MyTimer = Timer
'Defining the variables.
Dim HeaderCell, HeaderCellEnd, HeaderRange, Output_Range
[Code]....
View 3 Replies
View Related
Dec 30, 2008
I have some named ranges that refer to 5 pieces of data organized into a row. For example, the name MyNamedRange might refer to $C$5:$C$10.
I am trying to loop through each column and get the values in MyNamedRange, then change corresponding values in a different named range. However, when I try to use Offset to access the subsequent columns of MyNamedRange, it doesn't work. It only gets the value of the first column right, the rest return <EMPTY>.
Sample .......
View 10 Replies
View Related
Jul 17, 2006
How do I go about using named ranges instead of cell names(ie A4:A9)
Private Sub UserForm_Activate()
Dim lngRow As Long
Dim intIndex As Integer
UserForm1.ComboBox1.Clear 'Clear combobox
lngRow = 2 Do While Sheet1.Range("a" & lngRow).Value <> ""
For intIndex = 0 To UserForm1.ComboBox1.ListCount - 1
If UserForm1.ComboBox1.List(intIndex) = Sheet1.Range("a" & lngRow).Value
Then
Goto NextRow
End If
Next intIndex
UserForm1.ComboBox1.AddItem Sheet1.Range("a" & lngRow).Value
NextRow:
lngRow = lngRow + 1
Loop
End Sub
I wanted to change "a" to the defined range "search"?
View 7 Replies
View Related
Dec 5, 2007
the code to add two independent named ranges cell by cell in vba. Both of the named ranges have the same structure and the sum would be posted to a third area of the same structure cell wise.
View 7 Replies
View Related
Jan 28, 2014
At the moment I have to click in the cell and then look at the cells used and look across to the title of the rows.
So for example, performance = D3*D4*D5*D6
I would like, performance = vehicles*availabliity*utilisation*TKM.
That is easy if I have just 1 option. But what if I have 3 options? Naming each cell would be a way to do it but pretty laborious, is there a 'smart' way to use named ranges here?
View 3 Replies
View Related
