I have an excel spreadsheet that contains about 1000 rows and about 25 columns. The file contains employee information, name, id, cost center, department, title, FTE...etc. Column E contains the cost center which is a 7 digit number (i.e. 8001234). Within the 1000 rows of data there somewhere to 70 cost centers. I would like to delete all rows where a cost center does not match a list of 13 cost centers. I'm thinking I need some kind of array where I type in the 13 cost centers in the code, but I'm unsure of the syntax within VBA.
Also, the second step of the code I'm looking for is to delete all columns except for Column B, E, J and L. Those, by the way are Name, Cost Center, Job Title and FTE.
I have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
The first code hides everything just fine based on the date in A1. When I change it to the second code to delete instead of hide it is leaving a bunch of rows that the 1st code hides. Both codes have the same search criteria.
Code: For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Hidden = True Next cell
Code: For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Delete Next cell
I have the following codes to delete all blank rows in column A
Dim lastrow As Long lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row MsgBox lastrow
With Sheet1 For t = 1 To lastrow If Cells(t, 1) = "" Then Rows(t).Delete End If Next t End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
I got a code to delete all rows in the sheet which contain the word "DETAILS" but I now want to delete all the rows that do not contain the word "DETAILS"
My code if needed is:
Sub Find_details() Dim rng As Range Dim what As String what = "DETAILS" Do Set rng = ActiveSheet.UsedRange.Find(what) If rng Is Nothing Then Exit Do Else Rows(rng.Row).Delete End If Loop End Sub
Say I have a method that iterates through a bunch of Sheets. I check the name of every sheet, if it starts with "Data", I need to make everything between A4 and AZ500 empty (either by clearing cells or deleting rows doesn't matter how, as long as the result is an empty sheet below A4).
I want to delete all rows in the column of the ActiveCell when the ActiveCell.value < 0.01. Could you tell me why the code below doesn't work? It deletes the right rows but keeps looping without stopping
Sub DeleteZeros() Dim Col As Long Dim StopRow As Long Col = ActiveCell.Column StopRow = Cells(Rows.Count, Col).End(xlUp).Row
In a part of my code I have something that will delete all hidden rows, like:
For Z = 1 To TotalRows - 1 If Cells(TotalRows - Z, 1).EntireRow.Hidden Then Cells(TotalRows - Z, 1).EntireRow.Delete End If Next Z
I've done it in reverse to be quicker, but it's still quite slow. Granted, I am deleting several thousand rows, but surely there's a quicker way? Thinking about it logically I would presume that (in general) selecting stuff first in Excel and then deleting them appears to be quicker, but I'm not sure how to pull that off.
I have a large list of coordinates that I pasted from a website, and in Excel it has an emty row between every coordinate. I have about 2,000 cordinates, so ~4,000 rows. Is there a way to delete every other row besides manually?
I have created a worksheet (through an import into MS Excel 2007) which contains 287,281 rows. However, the data I need is located in rows: 4, 67, 130, ... (or n+63) rows.
I would like to delete rows that are based on these conditions: First ,Do a loop from row 2 to last available row. - Delete rows with same column(column B) that has the same value. However I want the last available row with the same ID to remain.
- Delete Rows with any values in found in other sheet column B. When the value taken from the first sheet(ABC) is compared to the column B in second sheet(DEF), if they are equal, the row will be deleted in the second sheet and the rows in first sheet will main. I had attached an simple example with the 2 sheets. The Result are shown in the example.
In my Excel 2003 worksheet I need a macro to search column B for duplicate entries. The data in column B is both numeric and string. If there are any duplicate entries, then I need the duplicate rows to be deleted.
I have data in the format below. I'm looking for a piece of code that will look down column B and if there are 30 rows in which all the values are zero then delete all rows from row 1 to the last row of those 30 rows.
way to delete multiple rows in a large spreadsheet with automation Example:
84076 Cantor 10 Retail Tue Nov 08, 2011 160 REVISED Division 8 1600 Compulsion Done 84077 Cantor 10 Retail Thu Nov 17, 2011 160 CANCELLED Division 8 1600 Compulsion Done 84078 Cantor 10 Retail Thu Oct 13, 2011 88 Division 8 880 Compulsion Done
I would need to delete all 4 rows within the "Cancelled" Box, but in a spreadsheet of 12000 boxes of 4. so, probably a macro to find them all, and delete them would be the way to go.
In my spreadsheet, column A can contain the same word over several rows. If column B is blank at any time - I want to delete all rows that have the same word in column A.
Apple 1 Orange 2 Apple Peach 1 Peach 2
So in this example - I want to delete rows 1 and 3 that show the word Apple.
I have this bit of code which is working perfectly. Now I need it to delete the rows it just copied. How would I go about doing this?
Sub TESTMonthEndReport() Dim x As Long, y As Long y = 2 Application.ScreenUpdating = False For x = 1 To Worksheets("January 2013").Range("K276").End(xlUp).Row If Worksheets("January 2013").Range("K" & x) = "Waiting" Then Worksheets("January 2013").Range("K" & x).EntireRow.Copy Sheets("February 2013").Range("A" & y).PasteSpecial Application.CutCopyMode = False y = y + 1 End If Next x End Sub
I am working on solving a problem where I get every other row deleted instead of every row. The situation is that I am using Autofilter to find empty cells in a column that shouldn't have empty cells. Before I can delete them, I need to add them to an array for exceptions handling. This means I need to step through the filtered range and record each unique ID for followup, then delete them. If I delete as I go, the "For Each" doesn't work on the original rows, but works on an increment. This means a deleted row causes the range to shift up one, and I end up deleting every other row.
I know I can solve this by deleting separately from recording them, but am searching for a way to work with the "For Each" maybe using a "Step -1" or something similar.
Is there anyway to run this where the 120 is inserted dynamically. I tried the following but it does not work. Test Delete Row is a named range. It does insert the correct row number, but still does not execute
Dim DelRow As String DelRow = [TestDeleteRow] [DeleteTest].Select Selection.ListObject.ListRows(DelRow).Delete
I have a combo box which I can select names from and I want the form to delete all the details associated with that name when I click my command button.
I have a spreadsheet nearing 10000 various products with columns A-M. I need to do the following:
Delete the entire row and shift up If column H contains "this text" or "File Server Manager" or "ABT". Column H being the product description.
Basically, I have customers that are authorized only to sell certain products. So instead of filtering threw and saying, ok he cant sell "File Server Manager" delete that entire row. OR he cant sell these 10 products cause it says oracle in the product description then delete that row.
I was researching the fourms and saw something on AutoFilter. Will that work?
It was something along the lines of:
.AutoFilter field:=1, Criteria1:="ENTER TEXT HERE" rng.SpecialCells(xlCellTypeVisible).EntireRow.Delete
I need macro to perform the following steps. I have also enclosed the image of the file for reference.
1)I need to move or copy the data in sheet one to sheet two.
2) In sheet two I need to select customer BBBB and delete all the rows beginning with PO# of 17, 18, 46 or GL4.
3) finally I want to delete all the rows in the sheet which are not equal to class Invoice. (Presently I do this using custom filter as "doesnot equal" = Invoice") ..
