I have a large list of coordinates that I pasted from a website, and in Excel it has an emty row between every coordinate. I have about 2,000 cordinates, so ~4,000 rows. Is there a way to delete every other row besides manually?
View 1 RepliesIn my spreadsheet, column A can contain the same word over several rows. If column B is blank at any time - I want to delete all rows that have the same word in column A.
Apple 1
Orange 2
Apple
Peach 1
Peach 2
So in this example - I want to delete rows 1 and 3 that show the word Apple.
I have a need to delete multiple rows with multiple criteria; criteria contains about 400 different and unique entries that have to be deleted. The code I obtained from this forum was modified but only deletes some entries and bypasses others. Row 1 is header and column 1 contains criteria that it it meets the " Case" it is supposed to be deleted. Example of code is below the Case has been shorted, for posting but normally each case runs the maximum length allowed. Please let me know where I messing up, I am thinking the it needs to be looping until all entries are deleted but I don't know how.
Sub DeleteRecords()
Dim n As Long, lastrow As Long
Dim ty As String
Dim a As Integer
lastrow = Range("D65536").End(xlUp).Row
a = 1 'this is the column in which you will find the notation finance numbers (Col X = 24)
For n = lastrow To 2 Step -1
ty = UCase(Cells(n, a))
Select Case ty..........................
I have a spreadsheet with multiple similar entries I would like to add up. What would work well for me is to be able to input a column like a and a target column like e.
So in this case it would search throughout column a and wherever it finds a duplicate entry add column e and then delete one of the rows. I could then run it again under different column criteria if needed.
So if I had the below sheet:
I could search by column a and add up column h to read like this:
I have a spreadsheet with several thousand lines on it and I only want certain rows from it. Unfortunately I cannot use a sort as I have to keep groups of data in the same order (the line count in between the data that I need left behind isn't always the same so I can't go that route either). I was hoping there was some code to delete all rows other than those where the cell in column A contains either "NAME"; "Data1" or "Data 2".
I tried the code below but that didn't work.
I need to review a 400,000 row spreadsheet and remove all records where 5 columns are populated with data so I am only eft with records that are missing information.
View 9 Replies View RelatedI work with a spreadsheet every week to input values and subtotal them. These values change constantly and instead of going through and manually deleting each row in a 100+ row spreadsheet to be able to import into another program, I'm looking for an quicker way to keep my data in order but consolidate by getting rid of only the rows where both column A and B are blank.
Here's an example of what I'm working with:
5
10
15
20
50
2
4
6
8
20
This is what I need the final product to look like:
5
10
15
20
50
2
4
6
8
20
So I would like to quickly delete rows 2, 5, and 11. All of the other answers I've found only show how to delete rows based on empty cells in only 1 column. How can I quickly delete the rows where both columns are empty?
I have two pieces of code that perform virtually identical functions on different sets of data.Basically, the code deletes rows of data based on a selection in a listbox. One code works perfect, the other has an issue.
The Issue:
When I select a single row for deletion, or multiple contiguous rows, everything works fine. It is when multiple Non-Contiguous rows are selected that the problem occurs. I get a "Delete Method of Range Class" error.
The data for the code that doesn't work is in a defined TABLE, the date for the code that does work isn't. So I assume this is where the problem lies.
I converted the data for the code that did not work from a table to a range, and everything works fine. However, I would really prefer that this data remain a table. There is consistently going to be rows added and deleted, and a table will take those adjustments into account, whereas a named range shrinks each time I delete a row, and doesn't grow as I add rows.Here is the code that works:
VB:
'Delete Selected Offers
Else
For r = 0 To ListBox1.ListCount - 1 [code].....
I'm new to this forum and to VBA
First-off, I'm using Excel 2003 SP3.
The setup: A software application I regularly use produces csv data files (in this case approx 300 files). These I have converted to xls format using a separate macro. The files are in one folder and named as follows eg
G1 18800.xls
G1 18802.xls
G2 18975.xls
G3 19881.xls
G3 19990.xls
G5 19990.xls
etc
The files contain the following data:
DATE TIME VALUE STEPS EXCL ACCEL
01-Oct-03 08:00 0 0 FALSE 0
01-Oct-03 08:01 0 0 FALSE 0
01-Oct-03 08:02 0 0 FALSE 0
01-Oct-03 08:03 0 0 FALSE 0
01-Oct-03 08:04 757 20 FALSE 0.18
01-Oct-03 08:05 1714 32 FALSE 0.44
01-Oct-03 08:06 1524 32 FALSE 0.39
01-Oct-03 08:07 1665 45 FALSE 0.47
01-Oct-03 08:08 1644 42 FALSE 0.46
01-Oct-03 08:09 263 8 FALSE 0.06
etc
I then created a macro using code I sourced from the internet, and included some addtional commands (filename, copy/paste). See below. This macro opens the all the xls data files in the folder and copies the relevant data to an analysis workbook [Analysis sheet, Results sheet, Master sheet] ie the data is copied from the data file and pasted into the Analysis worksheet. Then the results are copied from the Results sheet to the Master sheet. So far so everything works.
My problem is this: I'm stumped at how to delete rows from the xls data files before running the analysis workbook and macro. In other words, after converting the csv files to xls format I need to clean the xls data files.
I have a separate xls file with criteria data in two columns:
FileName Date
G1 18800 06-Oct-03
G1 18801 02-Oct-03
G1 18801 03-Oct-03
G1 18801 05-Oct-03
G2 18795 14-Oct-03
G2 18795 15-Oct-03
G2 18795 16-Oct-03
G2 18795 17-Oct-03
etc
The rows in a particular data file, with dates that are not present in the Criteria workbook must be deleted. This to be done for every data file in the folder. Also, I need to exclude rows for specific time periods eg 12H00AM - 04H00AM from all the files irrespective of date.
the code needed [should a separate macro be run or can code be placed within the present macro?]. I've tried looking for something similar on the internet, but my requirements seem too customized to be able to adapt the code that I found. And of course this is waaaay above my present skill level!
Option Explicit
Sub CopyPaste()
'This code opens up data files (xls) in a specified folder and copies data A1:G17281 to an Analysis workbook (Analysis sheet).
'The data from the Results sheet is then copied to the Master sheet.
Dim wkbDest As Workbook
Dim wksDest As Worksheet
Dim wkbSource As Workbook
Dim wksSource As Worksheet
Dim MyPath As String
Dim MyFile As String
[Code]...
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View RelatedI have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
The first code hides everything just fine based on the date in A1. When I change it to the second code to delete instead of hide it is leaving a bunch of rows that the 1st code hides. Both codes have the same search criteria.
Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Hidden = True
Next cell
Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Delete
Next cell
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
I got a code to delete all rows in the sheet which contain the word "DETAILS" but I now want to delete all the rows that do not contain the word "DETAILS"
My code if needed is:
Sub Find_details()
Dim rng As Range
Dim what As String
what = "DETAILS"
Do
Set rng = ActiveSheet.UsedRange.Find(what)
If rng Is Nothing Then
Exit Do
Else
Rows(rng.Row).Delete
End If
Loop
End Sub
Say I have a method that iterates through a bunch of Sheets. I check the name of every sheet, if it starts with "Data", I need to make everything between A4 and AZ500 empty (either by clearing cells or deleting rows doesn't matter how, as long as the result is an empty sheet below A4).
View 2 Replies View RelatedI have an excel spreadsheet that contains about 1000 rows and about 25 columns. The file contains employee information, name, id, cost center, department, title, FTE...etc. Column E contains the cost center which is a 7 digit number (i.e. 8001234). Within the 1000 rows of data there somewhere to 70 cost centers. I would like to delete all rows where a cost center does not match a list of 13 cost centers. I'm thinking I need some kind of array where I type in the 13 cost centers in the code, but I'm unsure of the syntax within VBA.
Also, the second step of the code I'm looking for is to delete all columns except for Column B, E, J and L. Those, by the way are Name, Cost Center, Job Title and FTE.
I want to delete all rows in the column of the ActiveCell when the ActiveCell.value < 0.01. Could you tell me why the code below doesn't work? It deletes the right rows but keeps looping without stopping
Sub DeleteZeros()
Dim Col As Long
Dim StopRow As Long
Col = ActiveCell.Column
StopRow = Cells(Rows.Count, Col).End(xlUp).Row
Range("A1").Select
[Code] .........
I have a macro that deletes rows. For some reason, the macro bombs out when the selection seems to be too big. Why is that?
deleterow_min = Sheets("Sheet1").Cells(1, 6)
deleterow_max = Sheets("Sheet1").Cells(1, 7)
Rows(deleterow_min & ":" & deleterow_max).Select
Selection.Delete Shift:=xlUp
In a part of my code I have something that will delete all hidden rows, like:
For Z = 1 To TotalRows - 1
If Cells(TotalRows - Z, 1).EntireRow.Hidden Then
Cells(TotalRows - Z, 1).EntireRow.Delete
End If
Next Z
I've done it in reverse to be quicker, but it's still quite slow. Granted, I am deleting several thousand rows, but surely there's a quicker way? Thinking about it logically I would presume that (in general) selecting stuff first in Excel and then deleting them appears to be quicker, but I'm not sure how to pull that off.
Here's my problem. I have the following table:
View 5 Replies View RelatedI am having trouble with the .SpecialCells(xlCellTypeBlanks)
What I need to do is for a macro to first go through a range ("G8:G50"), Add a 0 value to any blank cell.
Then I want the macro to delete the entire row for any of the cells that have a value of 0 in that range of "G8:G50"
I have created a worksheet (through an import into MS Excel 2007) which contains 287,281 rows. However, the data I need is located in rows: 4, 67, 130, ... (or n+63) rows.
View 10 Replies View RelatedI want to delete every second row, because I have data with 0.25m interval and I want 0.5m interval. Why I try the following it doesn't work?
View 2 Replies View RelatedLoop for Deleting Rows
Whats wrong with my code ?
I would like to delete rows that are based on these conditions: First ,Do a loop from row 2 to last available row. - Delete rows with same column(column B) that has the same value. However I want the last available row with the same ID to remain.
- Delete Rows with any values in found in other sheet column B. When the value taken from the first sheet(ABC) is compared to the column B in second sheet(DEF), if they are equal, the row will be deleted in the second sheet and the rows in first sheet will main. I had attached an simple example with the 2 sheets. The Result are shown in the example.
I need some VBA to delete rows that are under the value of 10 in column H and keep the rest, is there a way of doing this
View 7 Replies View RelatedIn my Excel 2003 worksheet I need a macro to search column B for duplicate entries. The data in column B is both numeric and string. If there are any duplicate entries, then I need the duplicate rows to be deleted.
View 4 Replies View RelatedI have data in the format below. I'm looking for a piece of code that will look down column B and if there are 30 rows in which all the values are zero then delete all rows from row 1 to the last row of those 30 rows.
Input_data AB106/01/2012 13:03:170206/01/2012 13:03:1816306/01/2012 13:03:1916406/01/2012 13:03:2016506/01/2012 13:03:2117606/01/2012 13:03:2224706/01/2012 13:03:2316806/01/2012 13:03:240906/01/2012 13:03:259.51006/01/2012 13:03:26191106/01/2012 13:03:27211206/01/2012 13:03:28161306/01/2012 13:03:2981406/01/2012 13:03:3001506/01/2012 13:03:31571606/01/2012 13:03:32801706/01/2012 13:03:331091806/01/2012 13:03:341331906/01/2012 13:03:35156
way to delete multiple rows in a large spreadsheet with automation Example:
84076 Cantor 10 Retail Tue Nov 08, 2011 160 REVISED Division 8 1600 Compulsion Done 84077 Cantor 10 Retail Thu Nov 17, 2011 160 CANCELLED Division 8 1600 Compulsion Done 84078 Cantor 10 Retail Thu Oct 13, 2011 88 Division 8 880 Compulsion Done
I would need to delete all 4 rows within the "Cancelled" Box, but in a spreadsheet of 12000 boxes of 4. so, probably a macro to find them all, and delete them would be the way to go.
I'm looking for a macro that will delete a row with a certain value (0.00) and the row below it.
View 9 Replies View Related