VBA Code To Search Column For String Of 50 Different Cities?
Mar 22, 2013
I need a VBA code that will insert a column next to A, search column A for a string of say 50 cities, and then enter the classification of that city into column B. example below.
Before
A B
1 Boston Good
2 Atlanta Good
3 Georgia Bad
4 NewYork Bad
After
A B C
1 Boston MA Good
2 Atlanta GA Good
3 Cleveland OH Bad
4 NewYork NY Bad
I'm not actually using cities and states.
View 6 Replies
ADVERTISEMENT
Aug 12, 2009
I need to assign different cities numbers in a column to the right, but I can't get this formula to do this....
View 9 Replies
View Related
Jul 5, 2014
A
B
1
Terry lives in England
=FORMULA
2
Claire lives in Spain
3
Paul live in France
I'm looking for a simple formula within the cells of column B to populate the cell with data based on the "country" mentioned in the string of cells in column A. There will be 20 countries and dependant on the country mentioned a 3 character country code will be entered in column B allowing for easy filtering of people based on country code. so something along the lines of if A1 contains "England" B1 equals ENG etc (for abot 20 countries)
The output should look like below
A
B
1
Terry lives in England
ENG
2
Claire lives in Spain
ESP
3
Paul live in France
FRA
View 8 Replies
View Related
Jun 22, 2009
I have this sheet: BEFORE MACRO..............
MACRO RESULT..............
Macro descripion:
Column A ( SEARCH STRING) list the string to be searched in C column
Column B (RESULT) reports the macro result
Column C ( List ITEMS ) is the column where the macro have to search the string
Operation:
- Starting from A2 up to the end of value in A column
- Search the substring ( A2 cell value ) in C column starting from C2 * if found copy all the C row content in B2
If 'not found' write NOT FOUND (*) all search ( from A2 to An ) starts always from C2
View 3 Replies
View Related
Jul 17, 2012
I am trying to get a code that will look for a string in the first row of my workbook and insert a column next to the found cell.
View 6 Replies
View Related
Jan 29, 2009
1) search column A for a string
2) as that string is found, move the entire contents of that cell to the same row, column F
3) insert a blank row above the row where the text was found
4) continue to search and perform the same steps
I was able to come up with the code to find a single instance and perform the necessary steps, but I've tried 'til I'm blue in the face to incorporate the FindNext object to parse through the entire worksheet. I thought I was on the right track with the attached code (which could be completely wrong), but it returns my MsgBox "Value Could Not Be Found."
View 7 Replies
View Related
Dec 17, 2008
Column A contains an alphanumeric string up to 50 characters in length. I need a formula to search the string in Column A for the word "Appeal" and place that word in Column B when found. Likewise for the words "Grievance" and "Complaint". If none of the three words are found in Column A, the contents of Column B should be blank. Here's the formula I've played around with (it works on the first line but returns #VALUE! on following lines):
=IF(SEARCH("Appeal",A1),"Appeal",IF(SEARCH("Grievance",A1),"Grievance",IF(SEARCH("Complaint",A1),"Co mplaint","")))
I've tried entering it as an array, but that also fails. This seems like a pretty simple problem ,but I've spent several hours trying to make the formula work so I'm obviously doing something wrong.
View 4 Replies
View Related
Feb 13, 2008
I would like to search cells in column D for the partial string, "PIPE," (A full string may look like this: 'PIPE, 24"ODx0.375"WT API-5LX-65,ERW OR SMLS'). Then, if it's there, return the value "LF" in the corresponding cell in column C. If that string isn't found, then I'd like it to return "EA".
I know this seems pretty easy, but there's a small problem. The word "BENT PIPE," could be in Column D, in which case, I would want it to return "EA" instead of "LF".
View 3 Replies
View Related
Apr 10, 2009
I need to make a list of items that occur above the string "Room" and the data offset to the bottom and bottom right.
Here is the sample data:
1, 100A
2, Room, Rh
3, 123, 11
3, 200B
4, Room, Rh
5, 456, 24
6, 300C
7, Room, Rh
8, 789, 56
...
On another sheet this is what the output should look like:
1 100A 123 11
2 200B 456 24
3 300C 789 56
...
Here is a copied function that I've been trying to work with. "ROOM_AREAS" is the range in column A. I just can't seem to figure out how the ROW and SMALL functions are supposed to work here.
View 12 Replies
View Related
Oct 5, 2009
I am trying to write a macro to search a column for a specific text string which when found, will copy the whole row the string is in. Once this row has been copied, I then want the macro to activate a new sheet and search for the next available empty row to paste the data. Once this has been done, go back to the original sheet and find the next cell in the original column with the specified text string and repeat until the range has been satisfied. Below is the script I have that sort of works.
View 5 Replies
View Related
Nov 19, 2013
code for a button that will search for a particular date that below 6 months from the current date today? Just like a notification that there is a date below 6 months from now. I will put this code where already have a code for my workbook.
View 1 Replies
View Related
Aug 1, 2013
I'd like to create a macro that searches a column within a changing, variable range.
For example, I have a roster with a list of teams. Each team is separated by a blank row. In each team, there are a varying number of team members, and one team leader. Column I has the position code, which designates whether the person is the team leader (SL), or just a team member (RD).
What I'd like to do, is search each team for the team leader, then check another column (Col A) just within that team for another value, and if that value is present return the last name of the team leader as well as the name of the member with the value in Col A.
The problem is, I'm not sure how to search a varying range in Col I. Teams can vary in size from 3-11 members (including leader), and the number of teams varies each day. I don't have the option of changing the format or layout of the roster - it's automatically generated by some other program and given to me in a CSV list.
For example, from this sample data of two teams
Testing Program : DKSFS
Scoring Center : Concord
Rater Schedule Date : 07/29/2013
[Code]....
how to define that range in Col I which changes with each new team. My approach is to find a way to search a range (essentially the values between blank cells ) in Col I for the value "SL", then search that same range in Col A for the value "VM". If there's a value of VM within that range (team), then copy Cols A-E, write them to a list, and insert that person's team leader last name at the right.
how to define a dynamic range in Col I? I already have a working macro written which generates that last time, sans team leader name, just trying to figure out how to search that changing range in Col I for each team to find team leader name.
Note, not all teams will have a member flagged with that VM marker in Col A.
View 9 Replies
View Related
Jul 5, 2014
I need a code that search through a column, counts the numer of times a string occurs and creates on another sheet the unique string and the number of times it occured.
e.g
I have this columns in a worksheet
s/n name company trainer
1 ball Dell Mk
2 doll Msed Kl
3 kol Dlink Mk
4 ball Msed Cl
5 Koll Dell Gl
I need the result to appear on another worksheet like this
Name NumberofTraining
Ball 2
doll 1
Koll 2
View 9 Replies
View Related
Apr 11, 2013
I have a spreadsheet which has "Employee: [agent 1 name]" in column A and it may or may not have the word "Break" in the same column before it mentions "Employee: [agent 2 name]". The amount of data between agent 1 and agent 2 varies and am needing code which will insert a row above "Employee: [agent 2 name]" if "Break" is not found, and add the word "Break" in column A on the inserted row. I would need this to loop through the spreadsheet until all 100+ agents have been searched.
I'm also needing this done for the word "Meeting" and would insert a row 2 rows above the next agent.
View 6 Replies
View Related
Apr 10, 2012
I have the Lat and Long for each of several US cities. I want to use these to create a bubble chart that plots the cities and which I can place over a US map picture.
However, I have the problem that, because of the curvature of the earth, the city locations form the lat and longs are not tying with the map.
how to adjust the lat and longs so that they will correspond to the typical US map?
For example, the base lat and longs for Denver are 39.5742 and -104.8588. What formulas can I use to modify these to match the standard map projection?
View 9 Replies
View Related
Mar 19, 2013
I am trying to lookup if a string like a name exists in another string which has a buch of values for example to see if andy exists in a string which has data like andy;sandy or sandy exists in andy;sandy
View 9 Replies
View Related
Jun 21, 2013
If I enter the city "Dunn" it auto capitalizes it. If I type my name "mark" in there it doesn't. I don't want it to auto "do" anything. How can I turn it off? I've tried copying into a new book and that didn't work so it doesn't seem to be formula driven. The issue is happening on a coworkers machine, but I cant seem to recreate it on mine. Hers is 2007 while mine is 2010.
View 9 Replies
View Related
Jan 9, 2009
I have a column with text that can contain a number of words one of which is 'UK & Europe'. I want to have another cell which will contain the value EMEA if the the cell mentioned above contains the word UK. how to do this as I'm stumped... I get a #value in cells that dont contain the word when using the formula =IF(FIND("UK",H27),"EMEA","ROW")
View 4 Replies
View Related
Feb 25, 2012
Is there a way to search for a cell that does not match or include a string?
I tried "^xyz" and "xyz" with no luck.
View 9 Replies
View Related
Jan 12, 2009
Scenario:
A1:A2000 (or the wole column) will have the following:
Black Total
Grey Total
Total Grey Print
Blue Total Print
and so on.
Each cell will contain the word "Total". In B1:B2000 ( or the whole column) I would like to remove the word total from the column A. Example:
B1 should only contain Black (instead of Black Total)
B3 should only contain Grey Print
B4 should only contain Blue Print
View 9 Replies
View Related
Jul 11, 2009
I'm using the following code which is working well. It finds an instance of the string "A83". Once it finds it, it moves down x number of cells and populates it with a new string. It then moves down another x number of cells and populates it with another new string, etc.
The problem is, it is only looking for "A83" one time and performing the appropriate actions at that point. What I need to do is look for *every* instance of the string "A83" and perform the appropriate actions.
View 10 Replies
View Related
Apr 23, 2013
I trying to search for a string in Excel and then delete that row. The code below will do that but I am also looking to delete the next row line out as well. .
Dim ws As Worksheet
Dim lRow As Long
Set ws = ThisWorkbook.Sheets("DSS")
[Code]....
View 2 Replies
View Related
Jan 26, 2009
I have a table of data and i need to search the table for 8digit numbers, that are beginning with "2" and copy the numbers to the column on the right. A cell can contain multiple numbers with 8 digits.
View 9 Replies
View Related
Jun 28, 2006
I use the following code to search through a database and paste the results in a separate worksheet.
Private Sub TextBox8_KeyUp(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
sheets("Search Results").Unprotect
Dim cell As Range
Dim foundcell As Boolean
If KeyCode = 13 Then
Application. ScreenUpdating = False
Application.enableevents = False
If Not TextBox8.text = "" Then
For Each cell In sheets("Detail").Range("e2:e" & sheets("Detail").Range("e65536").End(xlUp).Row)
If cell.Value = TextBox8.text Then
foundcell = True
With sheets("Search Results").Range("e65536").End(xlUp).Offset(1)
.Value = cell.Value
.Offset(, -4) = cell.Offset(, -4).Value
.Offset(, -3).Value = cell.Offset(, -3).Value
.Offset(, -2).Value = cell.Offset(, -2).Value
.Offset(, -1).Value = cell.Offset(, -1).Value
.Offset(, 1).Value = cell.Offset(, 1).Value ................................
View 2 Replies
View Related
Apr 17, 2013
I require the code for the following task.
I'm getting an input string from the user in an excel sheet(e.g. input.xls) .I have to search for that string in a group of excel files present in the same folder in which the input.xls file also present.The range of that cell in which the string is found (e.g. A1 ) has to be stored in a variable.
I know that Vlookup is an option but the number of excel files to be searched is more that 50.
View 1 Replies
View Related
Nov 17, 2008
If I have a store number (say 1234) and I am trying to search for something which contains 1234 (i.e. the whole string of ABCD1234, ABCD1235, ABCD1236 etc) is it possible to do this in one VLOOKUP formula?
One way of doing it would be to VLOOKUP("ABCD"&"1234",....) but I would rather do it the other way around, to prevent the formula from not working.
View 4 Replies
View Related
Feb 11, 2009
I have put a formula in excel to count how many times the word 'administration' appears in a column:
=COUNTIF(K2:K99,"Administration")
Unfortunately, the output that I am searching has mulitple words in it, separated with a colon and no space. My formula skips the count if the word Administration is not completely on it's own
e.g. Administration counts 1
Administration;Cardiology does not count
View 2 Replies
View Related
May 27, 2013
I am trying to search words that are in column A (5 letter combinations of sequences) within the text in column B (amino acid sequence).
So I am stumbling upon 2 questions:
- what is the function that would do this search.
- how to acchieve to reverse the text in B1 cell (eg. abcde --> edcba , but with 600 letters),
sample file: test.xlsx
View 4 Replies
View Related
May 20, 2009
how to use a formula or macro or whatever that is applicable to solve my current issue.
For example:
I've the following text below. The prefix of "atest", "bgo", "crun" and "dfly_c" are fixed pattern, however, the text after prefix will change accordingly.
atest_myhomeisfar
bgo_runfast
crun_b:veryfast
dfly_c:bluesky
Now my request is, I would like to have the final output as per below. Notices that there are some additional numbers behind the text (with semicolumn).
Final output:
atest_myhomeisfar:1998
brun_veryfast:2009
cfly_bluesky:1790
dfly_c:bluesky:1800
My question is, is it possible to create something to handle this issue? I mean something that will seach thru a particular fixed pattern as mentioned above and add the number behind it?
I would like to do it one at the time (one prefix at a time). Not mass searching and adding.
For example:
Search all "atest*" pattern and add an additional number behind.
View 14 Replies
View Related
Sep 18, 2009
I'm writing some VB in an Excel macro to search and replace a string of text.
The problem is that the string contains the " symbol, so when Access gets to that symbol it thinks that it's reached the end of the string.
e.g.
I want to replace "0519","863027" (including the quotes) with "0001","863027"
This is what the code looks like, but it obviously doesn't work :
View 11 Replies
View Related
