Plotting Cities On Bubble Chart?
Apr 10, 2012
I have the Lat and Long for each of several US cities. I want to use these to create a bubble chart that plots the cities and which I can place over a US map picture.
However, I have the problem that, because of the curvature of the earth, the city locations form the lat and longs are not tying with the map.
how to adjust the lat and longs so that they will correspond to the typical US map?
For example, the base lat and longs for Denver are 39.5742 and -104.8588. What formulas can I use to modify these to match the standard map projection?
View 9 Replies
ADVERTISEMENT
Jun 30, 2009
I would like combine (overlay) a bubble chart with a connected point scatter chart. I understand that, without VBA, this is not possible. However, I understand that, by using VBA, the markers of a scatter chart can be configured as circles with their size proportional to values in a specified column. This pseudo-bubble chart can then easily be combined with a connected point scatter chart.
My question is: does anyone have any VBA code to share that shows how to configure a scatter chart as the type of pseudo-bubble chart described above.
View 2 Replies
View Related
Jun 28, 2009
I would like to combine / overlay a bubble chart and scatter chart with straight connectors.
I understand that, without VBA, it is not possible to combine a bubble chart with a scatter chart.
Unfortunately, I am a VBA newbie, and so I cannot write my own code (though I can usually adapt code to my specific environment).
My question is: does anyone have VBA code to share that will convert a scatter chart series (x,y data in 2 columns) to a bubble-style chart (bubble radius in 3rd column)?
View 2 Replies
View Related
Sep 27, 2007
create a Quadrant Bubble chart. I have found examples of using scatter charts but unfortantely those charts do not satisfy what I am trying to accomplish.
View 5 Replies
View Related
Aug 2, 2013
I created a bubble chart whose x-axis and y-axis show every 10th value between 0 and 100 (i.e. 0, 10, 20, 30...). The axes intersect at (50, 50) to create 4 quadrants.
I want to erase/hide the values on the axes (i.e. the axes will no longer show 0, 10, 20, 30... and at the same time, the bubbles will still be in the same place) to create 4 blank quadrants and make my bubble chart easier to look at.
View 4 Replies
View Related
Nov 26, 2013
I have the table: chart1.png
If the bubble size is 0-5, I need the bubble color to be green
If the bubble size is 6-15, I need the bubble color to be yellow
If the bubble size is 16-25, I need the bubble color to be red.
So, right now my chart looks like this: chart.png
As you can see the top bubble is the right color, but based on the bottom bubble value, it should be green.
How do I make this change colors dynamically based on the bubble size value?
View 1 Replies
View Related
Apr 15, 2007
I’m trying to take an existing bubble chart, paste new data into the sheet,
then march sequentially from row to row, adding specific cells within each as a new series in the chart until I run out of rows. Below is my latest attempt (not working of course).
Sub setseries1()
Range("A1").Select 'select upper left cell to start
Do Until ActiveCell.Value = "" 'stop when you run out of rows
ActiveChart.ChartArea.Select
ActiveChart.ChartType = xlBubble
With ActiveChart.SeriesCollection.NewSeries
'use these values for the next series
.Name = ActiveCell.Offset(1, 0).Select
.BubbleSizes = ActiveCell.Offset(0, 1).Select
.Values = ActiveCell.Offset(0, 1).Select
.XValues = ActiveCell.Offset(0, 9).Select
End With
'go to next row, and repeat
ActiveCell = ActiveCell.Offset(0, -1)
Loop
End Sub
View 7 Replies
View Related
Jul 12, 2007
I have a worksheet where I am collecting data and a seperat Chart. The first part of this code which adds a new row in my table works perfectly fine, but the latter part (based on a macro recording) does not. I need to specify the relevant row for the new series in the bubble chart. The colums are of course the same.
Private Sub CommandButton1_Click()
Dim LastRow, LastRef As Long
'Works!
ThisWorkbook.Worksheets("Projektradar - input").Select
Range("Q3").Activate
LastRef = ActiveCell.Value
Range("Q3").Value = LastRef + 1
View 4 Replies
View Related
Dec 19, 2006
When you hold your mouse over a bubble on a bubble chart, it typically displays the x value, y value and size value. Is there any way to add other captions to display? For example, if my chart is based on sales data and I'm plotting a point based on ease of probability (x axis) and dollar value (y value)....I'd also like to see the initials of the salesperson assigned to that prospect when I hover over the bubble?
View 2 Replies
View Related
Aug 30, 2008
Let Sheet 1 have data in 3 columns to support a standard bubble chart
Col A: X Values
Col B: Y Values
Col C: Bubble Size
Id like to be able to color the bubbles according to the Y values, whether the Y values fall within the following ranges
Green for Y <=2
Orange for 2<Y<=5
Red for Y > 5
Im assuming some straightforward VB code is in the works but Im not quite there yet
View 4 Replies
View Related
Feb 16, 2007
I am looking to create a dynamic bubble chart. To do this I am using offset to create the series formula which without listing all the data names turns out to be something like this (where 297 will adjust to the number of rows with data): =SERIES(Project!$A$5:$A$297, Project!$J$5:$J$297,Project!$P$5:$P$297,2,Project!$Q$5:$Q$297)
My problem is that by creating the chart in this fassion I am unable to get a unique name for each data point. For example, if row A looks like this,
A5: 1
A6: 2
A7: 3
each data point will be named 1 2 3. How do I either create a new series for each row dynamically or get the specific name from column A to associate with the correct data point?
View 2 Replies
View Related
Jul 26, 2012
I am trying to format the colors of the bubbles on my bubble chart to Green (>5), Yellow (4-5), or Red (<4) based on the value used to create the bubblesize.
The problem that I am having is that .BubbleSizes is property of type String, not range like .xValues, or .Values. So instead of pulling in the value, I am pulling in the reference and getting a "Type Mismatch" Error. The reference of my data for .BubbleSizes is $D$5:$D51. Each row is it's own series and the list is dynamic, so I need to be able to support future rows without a lot of maintenance.
Here is the code that I have so far.
VB:
Sub DataSeriesFormat()
'
' DataSeriesFormat Macro
' Format Data Series based on defined parameters for Green, Yellow, and Red. Created by Derek Steinmetz 7/24/12
'
Dim x As Integer
Dim val As Variant
Dim Green As Range
[Code] ......
View 1 Replies
View Related
May 23, 2014
I am new to excel and to the bubble chart function and need creating one for a presentation.
I was asked to do a bubble chart to show the open and click to open percentage by subject line
E.g.
Subject line: Win 20% open, 23 % Click to Open, Getaway 20$ Open, 21% CTO etc., to include an industry average for open and CTO in the chart.
X axis: click to open and Y axis: open
I tried the following in the picture and it doesn't look right.
Capture.JPG
View 1 Replies
View Related
Nov 9, 2006
Im trying to create a simple 3D Bubble Chart macro, and as most people who've never dealt with this before (i think), i've hit a wall with BubbleSizes. I've attached the file im trying to get to work. The VBA is quite simple but an error occurs at BubbleSizes. I've read that BubbleSizes takes a different reference style than xValues and such, but haven't had any luck trying to change that. For those who just want to see the code without getting the file:
Sub EmbeddedChartFromScratch()
Dim myChtObj As ChartObject
Dim rngChtData As Range
Dim rngChtXVal As Range
Dim iColumn As Long
' make sure a range is selected
If TypeName(Selection) <> "Range" Then Exit Sub
' define chart data
Set rngChtData = Selection
' add the chart
Set myChtObj = ActiveSheet.ChartObjects.Add _
(Left:=250, Width:=375, Top:=75, Height:=225)
With myChtObj.Chart................................
View 5 Replies
View Related
Mar 27, 2014
I have a set of data containing "N/A" in some cells, and when I try to plot the chart using stacked lines chart type, the chart is completely off. if the "N/A" are causing this problem and how to fix this.
View 5 Replies
View Related
Mar 21, 2008
My chart with dynamic ranges still plots empty ranges despite using the following for empty cells:
Use of NA()
Use of #NA
Use of ""
Use of 0
What else am I missing?
View 9 Replies
View Related
Jan 17, 2014
I have 3 different series: S, J, and D. Each series has a list of different dates, and I need to plot the results for each date, while comparing the 3 series. I have created 3 different charts to display the results for each series - list of dates. However, I'd really like to chart all 3 series on one chart, so that you can see how the 3 compare.
I believe my obstacle is that the list of dates are not consistent between the 3. I tried to get around this by creating one table with all the dates, and leaving blanks where necessary (on Sheet 2). However, this created a problem because the blanks showed on the charts as 0s.
View 5 Replies
View Related
Nov 19, 2006
Say I have a line graph pic in jpeg. Can I plot the critical points (by clicking) on the line graph plot, so as to be able to get the (x,y) data, and thus, have all the data points to be able to re-produce the charts in XLS?
Basically, in other words, I would like to reproduce the line graph in XLS.
Or has anyone developed this kind of application, or can anyone redirect me to the right direction?
View 9 Replies
View Related
May 25, 2006
How do I plot the projected increase on an existing chart column ...
View 9 Replies
View Related
Dec 7, 2007
I want to do almost exactly this, but when I assign null using "", and plot the result on a graph, the graph thinks that cell is populated with a 0. Let me try to be a bit clearer. I have a range of dates in Col A, and percentages in B and C, but my last 3 dates in Col A have empty cells in B. Cols B and C are separate series. The line graph is (correctly) plotting series C, and series B, whose line stops where there is no more data.
What I need to do now is replace those empty cells with a formula like the one above. Ie, IF(ISBLANK(x1),<null>, <formula>), but using IF(ISBLANK(x1),"", <formula>) doesn't make the line on my graph stop.
View 3 Replies
View Related
Sep 13, 2010
Is there a way to plot the grand total from a pivot table on the pivot chart?
View 9 Replies
View Related
Sep 14, 2006
I have mapped data from Sheet1 to Sheet2 and created graphs in Sheet2 using the data. but when I hide the rows in Sheet2 the Graph is being cleared off. Need a solution so as to display the Graph in Sheet2 while hiding the rows in the same sheet.
View 2 Replies
View Related
Dec 12, 2006
i am creaing a chart in excell but i have a problem. i would like to have a chart like this one http://shrani.si/?screenshotow31.jpg. but when i create my chart it looks like this http://shrani.si/?screenshotow2t.jpg. first chart is created with some macro so i dont know how is it working but i think the problem is in blank cells because if cell is blank the chart line will go to 0 but i dont whant that :s
View 2 Replies
View Related
Apr 14, 2014
I'm trying to overlay a Gaussian distribution on some data. The data is a frequency of particle size diameters, ranging from 200-1000 um (see attached). I'm using Excel 2013.
View 1 Replies
View Related
Oct 8, 2013
I have a database where I would like to plot graphs from data of different periods and different series.
My current method is to go to the data set formulas and changing data range. The tricky part is that I might skip data series because I am selecting the series required for each chart.
How to do plot the different graphs efficiently and quickly.
View 2 Replies
View Related
Dec 18, 2013
I am trying to generate a column chart with a high-low range overlay so that it looks like error bars. I've precalculated all values but cannot figure out how to add the high-low range lines. The ranges are in the min and max columns.
I tried using custom error bars but it did not work.
View 4 Replies
View Related
Jan 21, 2014
I have some data that I'm plotting on a bar chart and I'm trying to "HIDE" the columns with zero or null values. Basically, if the column is blank, I don't want a "gap" on the chart. I'm not getting this to work.
View 6 Replies
View Related
Nov 15, 2010
This was so easy to do in excel 2003...However im now using 2010 and i cant figure out how to tell excel to ignore the empty cells for a scatter plot.
View 3 Replies
View Related
Aug 12, 2009
I need to assign different cities numbers in a column to the right, but I can't get this formula to do this....
View 9 Replies
View Related
Mar 22, 2013
I need a VBA code that will insert a column next to A, search column A for a string of say 50 cities, and then enter the classification of that city into column B. example below.
Before
A B
1 Boston Good
2 Atlanta Good
3 Georgia Bad
4 NewYork Bad
After
A B C
1 Boston MA Good
2 Atlanta GA Good
3 Cleveland OH Bad
4 NewYork NY Bad
I'm not actually using cities and states.
View 6 Replies
View Related
