i am going to ask is for my curiosity only and to be sure that no one will break my password.
If the VBA module is locked for viewing and password protected, it can't be cracked??I asking this, because i made an excel application with macros, and i don't want the user of it to crack my password.
I have to mention that the password is 17 letter+spaces long.
I repeat again....i asked this ONLY for my application safety.
After all the awesome macros I've obtained with the help of all of you, I now have over 30 macros, each in its own module. I have tried without success to re-name the modules with no luck. How is everyone organizing these?
View 2 Replies View RelatedI have a sheet that will not let me use macros. I can record them, but when I go to use them it says that the Macro security level is too high. I change it to Medium or Low but it doesn't make a difference.
The same spreadsheet works with Macros on another computer, but not my main one.
Let's say i have 2 Modules on my VBA forms, is it possible to Copy all the Codes in Module 1 and Paste it to Module 2 by using a Command Button?
View 1 Replies View Related i got a question how i can make a msgbox in one module with 'Yes' linking to a different module.
such as: this is located in module2
Code:
If MsgBox("Do you want to activate module1?" & vbCr & _
"" _
, vbYesNo, "Choose") = vbNo Then Exit Sub
i want that vbYesNo different
No as in Exit Sub
yes as in activate Module1
What i have at the moment is a module that contains code where i call a different module that i use as a procedure.
Module1
Code:
If Sheet1.Range("C4").Value < Sheet1.Range("A2").Value Then
If Sheet1.Range("K4") = "" Then
MsgBox "Please check 06:00 tasks not done yet!"
Cell = "Range(" & Chr(34) & "F4" & Chr(34) & ")"
If Sheet1.Range("C4") + 0.042 < Sheet1.Range("A2") Then
Run "EmailProSheet"
End If
End If
End If
EmailProSheet is what i call but now i want to use the variable "Cell" in the procedure as well?
Module3
Code:
MsgBox Cell
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)
On Error Resume Next
[Code]........
As it is now everything is working fine but does not return a value in "Cell" if the procedure is called. Is there another way?
I recieve an error :
Run-time error '50289':
Can't perform operation since the project is protected.
When i try and run my code.
The code does add parts to modules and workbook events, but I need the code to be protected.
I have a spreadsheet that I regularly have to clear the data and start over on, so i recorded a macro for clearing this rather long sheet with only one cllick.
My problem is that i am not the only person who will use this sheet, if They click the control button by mistake they will clear their work and you cannot undo it. I was wondering if i could make it ask "are you sure" kind of like the save option when closing an unsaved document.
We have developed an Excel workbook with hundreds of lines of VBA code written for a specific application, and we would like to protect it.
Could someone give me an idea of what security options we have over and above the below (if any)?
We have protected all sheets and the workbook itself with passwords. The VBA itself is protected with a passoword.
My understanding is that VBA can be hacked into quite easily.....is there any way of adding another layer of security/protection without having to move to another platform altogether?
If there is code attached to a worksheet, not necessarily in a macro, does the macro security still have to be low to use it??
View 3 Replies View RelatedIf I have a cell which has been validated and has a drop down list of 4 names in it.
I need it to prompt the user that when they choose there name and select, a window pop up or similar window appears asking for a 4 digit(or similar) code.
This is to stop others using peoples names against jobs they have completed so there is accountability if there are issues with information.
For each line I need it to re-prompt the user to enter the 4 digit pin so it cannot be tampered with.
Can anyone help with sending through a form and VB code possibly which I can copy into my spread sheet or a method I can use!
if there was a way to block out the last for digits of the social security number? list of numbers are in d4-d20
Ex
123-23-5785
would be
123-23-XXXX (with X's)
or how ever is supposed to be i forget the (standard) format
XXX-XX-5785
There are 2 cells on my spreadsheet where individuals must populate $ values. I want to put a security feature in the worksheet that would create a pop up warning to the user that one cell must be greater than the other.
B26 (Client Assets) must be greater than B41 (Dollar Impact), otherwise a dialog box pops up to indicate to the user that B41 cannot be greater than
B26.
Is there a way to make excel less vunerable to hacking? We have a customer who is always breaking in and changing things.
View 4 Replies View RelatedI was playing around with Macros on an excel file. I created a few and ran them. In the end, I didn't like the way they ran, so I deleted them all. However since I ran them in the excel file, every time I open the file it gives me a warning saying
"Macros have been disabled."
Is there any way to remove the possible Macros ties/links from my file? I know I can disable the warning, but if I just want to remove the Macros ties to my file.
i have produced a spreedsheet on ms excel.
On sheet 2 is all of the information and tables etc.. for example prices and information for the combo boxes an such...i need to protect this sheet so no one can change anything on it
the problem is when i do so, and go back onto sheet 1 and say tick a checkbox or select something from the combo box is doesnt allow me to, the protection message comes up
i dont want this to come up on sheet 1, only on sheet 2!
i think its because i have links between the pages? like all of the info for the combo box is on sheet 2
my workbook is finally working the way it should but every time i open it i get a security warning window with the options disable macros, enable macros and more info. how do i get this to not show up every time it's opened. this workbook will be used by someone other than me and i don't want them to need to do anything but open it and use it.
View 8 Replies View RelatedI would like the security warning not to pop up when the workbook is opened. I have been able to turn it off for myself but I had someone else test it and each time it's opened the security warning pops up with the disable, enable messages. Is there a way to turn this off permanently so not matter who opens it it won't pop up?
View 9 Replies View RelatedMy dad wrote me a VB programme to save me time entering repetitive data into an excel template for my business. At first it didnt work untilll i reduced security to low. Sice then I fried my computer and have had to reformat it with a diffirent version of windows, vista service pack 3. Now even on low security it doesnt work.
The little button in the worksheet to make the macro happen isnt visible or doesnt exist.
What would be the simplest VBA to determine if a cell E7 contains:
A federal ID always 9 digits with only one hyphen which is always after the 1st two numbers. For example: 12-3456789
or
A social security number always 9 digits with only two hyphens which are always 1 hyphen after the 1st 3 numbers & the other hyphen after the next 2 numbers. For example 123-45-6789.
In other words,
If Range("E7") = a federal id then
or
If Range("E7") = a social security number then
I have a security order list. This consist of several columns most important are
Column A Column B
Sec a 15,00
Sec b 14,50
Sec c 16,00
Sec a 15,10
Sec a 15,70
Sec b 16,70
Sec a 14,80
The first column gives the name of the security, the second column gives the bid price.
What I want is that I want to sort out all bid prices for a specific security. Vlookup works fine but again it just gives the first record. How can I get all bid prices for security a on a new worksheet without blank cells. If possible I would like to have it sorted as well.
I've written code into excel that sends workbooks to email recipients. This works fine except for use on one friends computer. Of course it's the friend that needed the code in the first place.
What happens is that when the macro attempts to mail a spreadsheet an outlook popup occurrs warning that a macro is attempting to email a message. And so nothing gets emailed out!
method for making a VBA script expire?
I.e. it will only work for a specified time and requires the author of the script to renew it at a given point?
I want to be able to do this to strengthen my position as an independent contrator financially...and copy protect my work from unwanted exploitation
Some ideas:
1-MSG box requesting a pre-defined password to renew the time for the script to work along with contact info for the author
2-Ability to define # of days, months and or years the script will work
3-Ability to define the # of days, months and or years that a MSG box warning of pending expiration will appear
4Ability to define the # of days, months and or years that the renew will extend the use of the script with multiple pre-defined passwords allowing different lengths of time extention! Perhaps an encryption method allows you to in another excel sheet (say the comfort of your own home) generate at will a password that will extend a scripts life for 3 months?! They contact you again, and again you generate a "random" password that will extend the original script
5-Anti-hacking measures, using MS's built in security
This might be a useful way of extracting monies over time, for the use of a script you provide....pre-set
I have 4 worksheets in a workbook: “choose security”, “download”, “MC” and “Lending”,
In the choose security” worksheet in CELL A2 is an HEX code, i.e. stock code.
2. In MC worksheet is raw data of all holdings related to various p’folios and securities, the information we need from this worksheet is,
a) p’folios, which are in column A,
b) Holdings which is Col B
c) Security code i.e. stock code which is in Col D
I need a macro or a formula to look at what security code is in “choose security” worksheet CELL A2, then look for this security in worksheet “MC” Col D, once matched, copy the data for this security to worksheet “download” and paste in CELL A3, I only need p’folios and holdings to be copied to “download” so data in Col A and B.
Once data has been copied to worksheet “download”, I then need another macro or formula to repeat step 2, but this time the macro will be looking at worksheet “Lending”,
a) P’folios, which are in Col B
b) Security code is in Col D
c) Holdings is in Col H
Once the macro or formula has found a match of security code, it will then copy the data from Col B and H to download worksheet CELL E3.
i want my application which i build though VBA in excel run on every computer without prompting for any Macros security message so is there any solution?
View 9 Replies View RelatedI have a function that is called in Access vba code that refreshes all sheets in a given workbook. We use it all the time for workbooks containing any number of tabs to be refreshed. The code has a key line: ActiveWroksheet.Refreshall. I need to now start to secure the pivot so the user can not refresh it. Another post pointed me towards: .PivotCache.EnableRefresh = False.
This apparently can only be used for a particular sheet; ie it can not be applied to ALL sheets in the workbook. The trouble is the function is generically used to refresh any workbook, and the number of sheets may vary.
Any thoughts on how I can disable the ability to refresh a pivot for ALL sheets. I'd prefer not to turn off the pivot wizard since the user should be allowed to manipulate it...just not refresh it.
Is there any lock/security option in excel sheets, suppose we make some table/list and after entering one data when the cursor goes to second raw, the previous raw data automatically lock. the user cannot edit or delete that record.
View 10 Replies View RelatedI've been told the latest Excels will allow any workbooks in a certain folder
to run macros as trusted (regardless of security setting?).
Can anyone confirm this please? Is there more to it? What versions are affected? Mine is 2003 so I can't check for this.
I have created a workbook. That has 35 worksheets within it. I have created a series of buttons and put in a macro code so that when the user clicks on the button it changes the active worksheet to what they clicked on.
So basically when they click button b it changes to worksheet b and if they click button c it changes to worksheet c, ETC.
The problem I have is that since it is a macro it works fine on my computer but when it is sent to other users, because of security settings on their pcs it will disable the macro [thus the buttons will not work or show up]. I have created a digital trust certificate for it. However it is alot of steps to install this for the basic user. Is there a way to create a button that will do what I want without using a macro code. In that it will be able to go to many different users and wont have to worry about the buttons not working because of security settings?
I have some code that requires access to the Visual Basic Project. If the user hasn't checked this option in Excel, I'd ideally like to open up the security form for them, with code like the below:
Application.Dialogs(xlDialogOpen).Show
However, I can't find the dialog constant for the security form. Does anyone know it, or have any alternatives? I don't want to use SendKeys.