Security Warning (Macros Have Been Disabled)

Apr 28, 2008

I was playing around with Macros on an excel file. I created a few and ran them. In the end, I didn't like the way they ran, so I deleted them all. However since I ran them in the excel file, every time I open the file it gives me a warning saying
"Macros have been disabled."

Is there any way to remove the possible Macros ties/links from my file? I know I can disable the warning, but if I just want to remove the Macros ties to my file.

View 10 Replies


ADVERTISEMENT

Warning When Macros Are Disabled

Jun 22, 2007

How can I write a "warning" in the form of a message box that will appear if the user does not enable macros?

Also, can I have one of the buttons on this message box turn on macros?

View 9 Replies View Related

Turn Off Security Warning Regarding Macros

Jun 2, 2009

I would like the security warning not to pop up when the workbook is opened. I have been able to turn it off for myself but I had someone else test it and each time it's opened the security warning pops up with the disable, enable messages. Is there a way to turn this off permanently so not matter who opens it it won't pop up?

View 9 Replies View Related

Security Warning About Macros When Opening 2003 File

Mar 3, 2009

I'm using Excel 2003 and recently when I open a file, it prompts out a Security Warning message about Marcros which at the end contains 3 choices: Disable Macros, Enable Macros, and More Info. I then click Enable Macros to open the file. Once open, I go to Tools > Marco > Run Marco (Alt+F8). A Macro box prompt out but the Macro list is empty. I try different choice inside the pull down menu "Macros in" but the Macro list is still empty.

Where can I find out the macro which triggers the warning message of Security Warning when opening the file? And how can I delete the macro if found useless.

View 7 Replies View Related

Security Warning When Workbook Opened

May 30, 2009

my workbook is finally working the way it should but every time i open it i get a security warning window with the options disable macros, enable macros and more info. how do i get this to not show up every time it's opened. this workbook will be used by someone other than me and i don't want them to need to do anything but open it and use it.

View 8 Replies View Related

Edit Macro When Macros Disabled

Oct 23, 2006

I accidently put the Application.Quit command in the wrong place. Now Excel closes immediately when the macro executes. I can get into Excel if I disable the macro, but then it won't let me edit the macro. Is there a way to edit my macro without executing it?

View 7 Replies View Related

Macros Disabled In A Shared Workbook

Jan 17, 2007

My macros don't work when the workbook is shared. They are not stored in my personal workbook and so are available to all users. What's going on?

View 3 Replies View Related

Prohibiting File From Opening If Macros Are Disabled?

Feb 23, 2003

I have a file that contains Macros that I want to share with others. The only problem I have is that users have the right to enable or disable macros. If they disable the macro - some of the security functions could be lost.

Is there a way to create a macro that will not allow the file to be opened if they choose to Disable the Macros.

View 9 Replies View Related

Automatically Close Workbook If Macros Are Disabled

Apr 16, 2008

If a user disables macros when opening a file, is there a way to have the excel file automatically close?

View 9 Replies View Related

Macro To Delete Vba Code - Macro Security Warning

Feb 7, 2008

I have recently grabbed the very helpful "Macro to delete VBA code" from this site, and it's working but with one small problem.

My worksheet runs a lot of code, then deletes all macro code and saves itself.

The problem is the next time i open I still get the macro security warning!

I've checked thoroughly and there is definatley no vba left anywhere.

If I open the document, enable macros, and save it, then open it again, I no longer get the warning.

View 9 Replies View Related

If Macro Is Disabled: Place A Message On The Sheet Saying This Will Only Work With Macros Enabled

Aug 17, 2006

When you enable macros the sheets 2, 3, 4 ect are visible but if you disable macros, you only see sheet 1 and and you can place a message on the sheet saying this will only work with macros enabled.

View 2 Replies View Related

Macros Dont Work Even On Low Security

Aug 21, 2009

My dad wrote me a VB programme to save me time entering repetitive data into an excel template for my business. At first it didnt work untilll i reduced security to low. Sice then I fried my computer and have had to reformat it with a diffirent version of windows, vista service pack 3. Now even on low security it doesnt work.

The little button in the worksheet to make the macro happen isnt visible or doesnt exist.

View 13 Replies View Related

Without Prompting For Any Macros Security Message

Aug 28, 2008

i want my application which i build though VBA in excel run on every computer without prompting for any Macros security message so is there any solution?

View 9 Replies View Related

Security Alert This File Contains Encrypted Macros...

Mar 3, 2007

I just loaded Excel 2007, and then opened a workbook I wrote that made pretty extensive use of macros and code. I knew enough to first set up Excel via the "Trust Center" to allow ALL macros to run, against MS's, or more likely against MS's lawyer's, recommendations. btw, does anyone have a clue as to what "Trust access to the VBA project module" is all about? Apparently MS doesn't, for I have searched Help and the KB for it in vain. Anyway, I brought the old xls workbook in, then saved it as a macro-enabled spreadsheet, .xlsm. Then I open it, and uhg, a most distasteful surprise. Even though I specifically went in and set Excel to run all freaking macros, someone at MS has decided I am too stoooopid to make this decision, and all macros have been automatically disabled. OK, so let us click where it says "Options" on this warning bar.

A window pops up telling me that this file contains encrypted macros that have been disabled...". Do a search on that, again, MS, MS kb, even Google, and you are not going to find it (In quotes). There is ONE freaking option with a radio button now, telling me "Help protect me from unknown content" - again, I try a Google search, an MS search and an MS kb search... nothing directly addressing it; but I do the logical intuitive thing - there is a selected radio button there, so click it to unselect it. Click the idiot thing until the cows come home, darn it, it won't do a thing! I even tried an Alt-p as they have the "p" underlined - all that does is select the statement, it remains selected, tap the space bar, hit the space bar, stand on the space bar... First they disable all the macros. OK, I can live with going in and fixing that, but then deciding that I am too dumb to make that choice so don't allow me to turn them on in my own freaking code? Yes, it has been several hours and I am still pissed off beyond belief.

View 9 Replies View Related

Security Prompt Even After Deleting Macros Using VBA Code

Jun 27, 2007

I have used the following Macro that deletes the Macro code. It then saves the file and quits excel.

*************************************
Sub removeAllCode()
Dim awi
Dim awcl As Integer
Dim count As Integer
Dim i As Integer 'loop counter
On Error Resume Next
count = ActiveWorkbook.VBProject.VBComponents.count
For i = 1 To count
Set awi = ActiveWorkbook.VBProject.VBComponents.Item(i)
awcl = awi.CodeModule.CountOfLines
awi.CodeModule.DeleteLines 1, awcl
Next i
Set awi = Nothing
ThisWorkbook.Save
Application.Quit
End Sub
*************************************

However when I open the Excel File, I still get the Macro Prompt. I have checked in Macro list as well as in VB Editor and no Macro code exists

If I have the file manually (or do a save as) and then reopen the file, I no longer get the Macro prompt.

I have tried various examples listed in different forums/sites but nothing works.

View 9 Replies View Related

End User See The Warning Enable Macros

Sep 10, 2009

I have a couple spreadsheet Excel 2003 that I have to Email, I use a few macros with these spreadsheets. The Macros are kept in my personal workbook. When I Email these sheets does the end user see the warning enable macros or do they just see the sheet as is. I am mailing the whole workbook but macros are in my personal workbook. If they see the warning is it possible for me to Email so they will not have to contend with that?

View 3 Replies View Related

Warning Macro Message With No Macros

Apr 3, 2009

Everytime I open the excel file I am working on I get a message saying that the file contains macros.

I have deleted all the macros I could find under "Tools" and "Macros" but I still get Module1.sortie, sortie and sortie listed. I can delete Module1.sortie but for the other two, sortie and sortie, I only have the "cancel" and "create" options.

View 14 Replies View Related

How To Save Workbook With Macros Without Warning Message

Oct 3, 2013

I have several workbooks that use macros from my personal macro library (MyExcelAddIns.xlam).

Some of these, especially new ones, get an error message every time I save them: "Privacy warning: This document contains macros, ActiveX controls, ... These may contain information that cannot be removed by the Document Inspector."

Then after I save it once or twice, the message goes away. Why am I getting this message? Why only sometimes? What can I do to get rid of it entirely?

View 3 Replies View Related

Warning Page If Macros Aren't Enabled

Jun 10, 2008

I'm making a little calculator thing for some of my colleagues, and I've created a warning sheet at the front in case their macro security is set to high or they disable macros.

The thing is, when the workbook is opened with macros enabled, and when it's closed, this warning sheet flashes briefly. Is there any way to avoid this?

My code is:

Private Sub Workbook_Open()
Worksheets("Form").Visible = True
Worksheets("Form").Activate
Worksheets("Enable macros").Visible = False
UserForm1.Show
End Sub

Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.ScreenUpdating = False
Worksheets("Enable Macros").Visible = True
Worksheets("Form").Visible = False
Me.Save
Application.ScreenUpdating = True
End Sub

View 9 Replies View Related

If Macros Are Diabled At Security Prompt, How To Prevent Workbook From Opening

Dec 15, 2008

I am relying on macros for a lot of functionality and security.

Is there a way to stop a spreadsheet from being opened/accessed if a user disables macros at the security prompt?

View 9 Replies View Related

Macro Security (saying That The Macro Security Level Is Too High)

Nov 18, 2008

I have a sheet that will not let me use macros. I can record them, but when I go to use them it says that the Macro security level is too high. I change it to Medium or Low but it doesn't make a difference.

The same spreadsheet works with Macros on another computer, but not my main one.

View 5 Replies View Related

Disabled Tools

Jan 21, 2010

Just discovered the drawing tools on my quick access tool bar are disabled. All were enabled and working fine just yesterday. I'm running 07 on xp. I've shut down and rebooted, no change. Need to know how this could have happened but mostly, how to enable.

View 9 Replies View Related

Save As PDF With Printing Disabled?

Jan 21, 2013

Is there a way to save a document as a PDF but with printing disabled?

View 3 Replies View Related

Can Page Tabs Be Disabled?

Jul 19, 2007

I am creating a workbook and need the user to stay on a single page of the workbook until certain circumstances have been met, specifically, a macro has been activated, thus confirming that certain data is now in place. Is there a code of function that I can introduce into the workbook so that clicking on the other tabs of the other sheets will not allow the user to leave the page they are on until that circumstance is met?

View 9 Replies View Related

Disabled Not The File Close

Sep 25, 2009

I have this code that I've sourced from the internet, i have used to disable red "X" on the top right,

Private Sub Workbook_BeforeClose(Cancel As Boolean)
Cancel = Not bClose

If Cancel = True Then MsgBox "Please Save your data and select File - Close from the main menu"
End Sub

but when I select File and then close .... it runs the same macro? eh? i want x's disabled not the file close ....

View 9 Replies View Related

Insert Functions Disabled

Feb 23, 2010

I have a worksheet that all of the icons that start a macro disappeared. The workbook will not let me insert a pic, or clipart. Nothing is locked.

View 9 Replies View Related

Some Sub-Menus Disabled - Greyed Out

Nov 6, 2006

I have noticed that the submenus for the following main menu items are disabled

Edit Insert Format Data

The submenus for the other main menu items are fine.

I have not run any macros that alter the menus.

I have tried Tools>Customise Reset Menu and Toolbar usage. I then exit the Excel session, but the problem still remains,

View 3 Replies View Related

Cancelling Events Disabled?

Jul 14, 2007

The boolean Cancel suddenly stopped working for me in all workbook and worksheet events. Consider a simple example:

Private Sub Worksheet_BeforeRightClick(ByVal Target As Range, Cancel As Boolean)
Cancel = True
End Sub

does not cancel right click, like it has before. Same with BeforeDoubleClick. I can only assume it is some kind of a setting or similar, as there is absolutely no change in the code.

View 4 Replies View Related

Macro Cannot Be Found Or Is Disabled Error

Mar 7, 2013

I have a worksheet with several option buttons and until yesterday, I had no problem selecting them. But today, every time, I select a radio button, an error shows up stating "Cannot run Macro "Option Button_click. Macro is not available in this workbook or is disabled". When the user selects a radio button, text appears in Col B depending on what button was selected (using VLOOKUP). That stuff is still working fine. It's just as soon as I click a radio button, the error shows up.

Based on the radio button selected, user can add in information to the columns adjacent to it, and then click a button to store that information in some rows below. The code for that button is stored in the sheet module. I have tried enabling macros and disabling macros and no change has appeared. What I have noticed though is that yesterday, when i opened the workbook, a yellow bar appeared asking if I wanted to "Enable Content". Today, that bar didn't appear.

View 1 Replies View Related

Disabled Properties Menu Option

Apr 9, 2009

I'm using excel 2003 and received a file that has the properties (file/Properties) menu option grayed out. I need to access the properties menu to identify file information.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved