Without Prompting For Any Macros Security Message
Aug 28, 2008i want my application which i build though VBA in excel run on every computer without prompting for any Macros security message so is there any solution?
View 9 Replies
ADVERTISEMENT
Message Box To Pop Up Every 10 Mins Or So Prompting The User To Close The Workbook
Oct 13, 2008how do i go about setting a message box to pop up every 10 mins or so prompting the user to close the workbook.? i want it to be as irritating as possible! iv'e had a look at ontime but cant get my brain into gear!also don't some of these timers fire even if workbook closed?
View 4 Replies View RelatedSecurity Warning (Macros Have Been Disabled)
Apr 28, 2008I was playing around with Macros on an excel file. I created a few and ran them. In the end, I didn't like the way they ran, so I deleted them all. However since I ran them in the excel file, every time I open the file it gives me a warning saying
"Macros have been disabled."
Is there any way to remove the possible Macros ties/links from my file? I know I can disable the warning, but if I just want to remove the Macros ties to my file.
Turn Off Security Warning Regarding Macros
Jun 2, 2009I would like the security warning not to pop up when the workbook is opened. I have been able to turn it off for myself but I had someone else test it and each time it's opened the security warning pops up with the disable, enable messages. Is there a way to turn this off permanently so not matter who opens it it won't pop up?
View 9 Replies View RelatedMacros Dont Work Even On Low Security
Aug 21, 2009My dad wrote me a VB programme to save me time entering repetitive data into an excel template for my business. At first it didnt work untilll i reduced security to low. Sice then I fried my computer and have had to reformat it with a diffirent version of windows, vista service pack 3. Now even on low security it doesnt work.
The little button in the worksheet to make the macro happen isnt visible or doesnt exist.
Turn Off Outlook 2007 Security Message
Sep 18, 2012How to Turn off outlook 2007 security message to prompt me to press allow each time i send a message.
View 4 Replies View RelatedSecurity Alert This File Contains Encrypted Macros...
Mar 3, 2007I just loaded Excel 2007, and then opened a workbook I wrote that made pretty extensive use of macros and code. I knew enough to first set up Excel via the "Trust Center" to allow ALL macros to run, against MS's, or more likely against MS's lawyer's, recommendations. btw, does anyone have a clue as to what "Trust access to the VBA project module" is all about? Apparently MS doesn't, for I have searched Help and the KB for it in vain. Anyway, I brought the old xls workbook in, then saved it as a macro-enabled spreadsheet, .xlsm. Then I open it, and uhg, a most distasteful surprise. Even though I specifically went in and set Excel to run all freaking macros, someone at MS has decided I am too stoooopid to make this decision, and all macros have been automatically disabled. OK, so let us click where it says "Options" on this warning bar.
A window pops up telling me that this file contains encrypted macros that have been disabled...". Do a search on that, again, MS, MS kb, even Google, and you are not going to find it (In quotes). There is ONE freaking option with a radio button now, telling me "Help protect me from unknown content" - again, I try a Google search, an MS search and an MS kb search... nothing directly addressing it; but I do the logical intuitive thing - there is a selected radio button there, so click it to unselect it. Click the idiot thing until the cows come home, darn it, it won't do a thing! I even tried an Alt-p as they have the "p" underlined - all that does is select the statement, it remains selected, tap the space bar, hit the space bar, stand on the space bar... First they disable all the macros. OK, I can live with going in and fixing that, but then deciding that I am too dumb to make that choice so don't allow me to turn them on in my own freaking code? Yes, it has been several hours and I am still pissed off beyond belief.
Security Prompt Even After Deleting Macros Using VBA Code
Jun 27, 2007I have used the following Macro that deletes the Macro code. It then saves the file and quits excel.
*************************************
Sub removeAllCode()
Dim awi
Dim awcl As Integer
Dim count As Integer
Dim i As Integer 'loop counter
On Error Resume Next
count = ActiveWorkbook.VBProject.VBComponents.count
For i = 1 To count
Set awi = ActiveWorkbook.VBProject.VBComponents.Item(i)
awcl = awi.CodeModule.CountOfLines
awi.CodeModule.DeleteLines 1, awcl
Next i
Set awi = Nothing
ThisWorkbook.Save
Application.Quit
End Sub
*************************************
However when I open the Excel File, I still get the Macro Prompt. I have checked in Macro list as well as in VB Editor and no Macro code exists
If I have the file manually (or do a save as) and then reopen the file, I no longer get the Macro prompt.
I have tried various examples listed in different forums/sites but nothing works.
Security Warning About Macros When Opening 2003 File
Mar 3, 2009I'm using Excel 2003 and recently when I open a file, it prompts out a Security Warning message about Marcros which at the end contains 3 choices: Disable Macros, Enable Macros, and More Info. I then click Enable Macros to open the file. Once open, I go to Tools > Marco > Run Marco (Alt+F8). A Macro box prompt out but the Macro list is empty. I try different choice inside the pull down menu "Macros in" but the Macro list is still empty.
Where can I find out the macro which triggers the warning message of Security Warning when opening the file? And how can I delete the macro if found useless.
If Macros Are Diabled At Security Prompt, How To Prevent Workbook From Opening
Dec 15, 2008I am relying on macros for a lot of functionality and security.
Is there a way to stop a spreadsheet from being opened/accessed if a user disables macros at the security prompt?
Excel 2007 :: Security Alert - Data Connection Message Every Time?
Dec 20, 2012I open a spreadsheet or workbook that has links to other workbooks I am notified by the message bar that content has been blocked. I click Options > Enable this content > OK. Even if I don't make any changes I'm prompted to save changes when I close the file. If I hit Yes or if I hit No, I will still be prompted to enable content in the message bar the next time I open the same file.
I have changed the External Content settings in the Trust Center to "Enable all data connections (not recommended)" and "Enable automatic update for all workbook links (not recommended)" but I still get the messages.
My Message Bar is set to "Show the message bar in all applications when content is blocked" because I read on Microsoft KB that the other option of "never show information about blocked content" will still block the content, just not tell you about it, which doesn't fix my issue.
The files I'm opening and the files linked to and from them are all on the same shared drive on a file server in the office. Is there a way to tell Office '07 that our file drive is a trusted source by default?
Warning Macro Message With No Macros
Apr 3, 2009Everytime I open the excel file I am working on I get a message saying that the file contains macros.
I have deleted all the macros I could find under "Tools" and "Macros" but I still get Module1.sortie, sortie and sortie listed. I can delete Module1.sortie but for the other two, sortie and sortie, I only have the "cancel" and "create" options.
Pop Up Message To Enable Or Disable The Macros
Apr 17, 2008Whenever I open an Excel file that has macros in it, a message always pop up and ask if I want to enable or disable the macros.
Is there a way to get rid of the message?
Combining Two Macros Results In Error Message
Jun 30, 2009Note: It should also be noted that, when "splitting" the macros below up into two different macros, they work, but then I have to play 2 macros when I only want to play one.
Just when I thought I was getting this macro stuff, I've come back to reality. I tried to combine these 2 macros together (taking out 1 "sub" and 1 "end sub") and when doing so, I got the error message
"duplicate declaration in current scope"
I thought about removing some "Dim" lines, but realized that the Dims say different things. For example in macro 1, it says "Dim Rng As Range" and in macro 2, it says "Dim Cust As Range".
Don't I need both? Do I put in an "exit sub"?
How To Save Workbook With Macros Without Warning Message
Oct 3, 2013I have several workbooks that use macros from my personal macro library (MyExcelAddIns.xlam).
Some of these, especially new ones, get an error message every time I save them: "Privacy warning: This document contains macros, ActiveX controls, ... These may contain information that cannot be removed by the Document Inspector."
Then after I save it once or twice, the message goes away. Why am I getting this message? Why only sometimes? What can I do to get rid of it entirely?
Enable Macros Upon Opening A Workbook And Avoid Receiving The Message
Jul 14, 2009What is the code to enable macros upon opening a workbook and avoid receiving the message "Security Warning-Macros have been disabled" in Excel 2007?
View 3 Replies View RelatedRepetitive Macros- Display The Contents Of A Range Of Cells In A Message Box
Dec 6, 2009I have a work book with several (couple of hundred) buttons, which when clicked display the contents of a range of cells in a message box as shown below;
View 4 Replies View RelatedIf Macro Is Disabled: Place A Message On The Sheet Saying This Will Only Work With Macros Enabled
Aug 17, 2006When you enable macros the sheets 2, 3, 4 ect are visible but if you disable macros, you only see sheet 1 and and you can place a message on the sheet saying this will only work with macros enabled.
View 2 Replies View RelatedPrompting For Parameter Value Using Macro?
Mar 12, 2014Last time i got macro from this forum how to import files automatically. I am importing the data from the specific folder.In code itself we are hardcoding that file names.But in that folder i have lot of files is there any option to pass any parameter value.That means each time it will asks for filename(Prompt).Once you give file name it will automatically load the data.
[Code] .....
Rename A Sheet By Prompting For A Name?
Jul 24, 2006I first insert a new sheet and then i want something (inputbox or so) where i can give in the new name of that sheet (i have to do that a lot of times, so i wont do it manually) is there any solution for this thing??
View 2 Replies View RelatedMacro Security (saying That The Macro Security Level Is Too High)
Nov 18, 2008I have a sheet that will not let me use macros. I can record them, but when I go to use them it says that the Macro security level is too high. I change it to Medium or Low but it doesn't make a difference.
The same spreadsheet works with Macros on another computer, but not my main one.
Prompting User To Open File?
Oct 18, 2011I have code that prompts the user to open a specific excel file. However, with the following:
Filepath = "..."
name = Application.GetOpenFilename(FileFilter:="Excel Files *.xls* (*.xls*),",)
Workbooks.Open name
the default directory you start out in in the window that prompts the user to select a file is NOT ...
How can I properly assign which directory the user starts in so they need not go through 10 sub-directories everytime they run this code?
Prompting User For File Input
Nov 7, 2006I want to do is prompt the user for an Excel file and then insert it as a new worksheet as sheet 2. Also, if possible I would like the imported file to insert to the right of sheet 1. Anyone know how to do this or at least know some parts of this problem.
View 9 Replies View RelatedPrompting User To Delete Worksheet When Opening Workbook
Jul 13, 2012I am trying to have an operation run when opening the Workbook. The UserForm opens fine, but I get an error when the GoButton_Click sub runs. The error file is not very comprehensive.
The user is promoted to 'Delete' or 'Cancel' before the sheet is deleted. I do want to select 'Delete' for the user, but I'm not sure how to do this.
The error mentioned occurs after the user selects 'Delete'. The error is:
Run-time error '-2147417848 (80010108)':
Automation error
The object envoked has disconnected from its clients.
VB:
Option Explicit
Private Sub UserForm_Initialize()
Me.Choices.List = Array("Choice 1", "Choice 2")
End Sub
Private Sub GoButton_Click()
If Templates = "Choice 1" Then
[Code]....
Macro To Open Protected Workbooks Prompting To Enter Password?
Jul 25, 2012I am having an issue with a macro to open password protected workbooks. The macro works just fine in opening the files and whatnot, but for some reason it prompts me to enter the password again once the file has been opened. Funny thing is I can either hit OK or hit Cancel and it goes to the next file. All files open correctly, I was just curious as to why this is happening and how to correct it?
View 1 Replies View RelatedEncourage Enabling Of Macros: Disable Macros When Opening Then The Worksheet Menu Bar And Other Command Bars Are Still Available
Aug 26, 2009I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies View RelatedAre You Sure - Security For Macro
Aug 7, 2007I have a spreadsheet that I regularly have to clear the data and start over on, so i recorded a macro for clearing this rather long sheet with only one cllick.
My problem is that i am not the only person who will use this sheet, if They click the control button by mistake they will clear their work and you cannot undo it. I was wondering if i could make it ask "are you sure" kind of like the save option when closing an unsaved document.
VBA Security Options
Oct 12, 2009We have developed an Excel workbook with hundreds of lines of VBA code written for a specific application, and we would like to protect it.
Could someone give me an idea of what security options we have over and above the below (if any)?
We have protected all sheets and the workbook itself with passwords. The VBA itself is protected with a passoword.
My understanding is that VBA can be hacked into quite easily.....is there any way of adding another layer of security/protection without having to move to another platform altogether?
VBA Module Security
Dec 17, 2008i am going to ask is for my curiosity only and to be sure that no one will break my password.
If the VBA module is locked for viewing and password protected, it can't be cracked??I asking this, because i made an excel application with macros, and i don't want the user of it to crack my password.
I have to mention that the password is 17 letter+spaces long.
I repeat again....i asked this ONLY for my application safety.
Macro Security
Jun 29, 2006If there is code attached to a worksheet, not necessarily in a macro, does the macro security still have to be low to use it??
View 3 Replies View Related