VBA Password Prompt Keeps Popping Up?
Dec 13, 2013The VBA password prompt keeps popping up when I closed my workbook even though I haven't opened up the VBA window. How do I stop this?
View 1 RepliesThe VBA password prompt keeps popping up when I closed my workbook even though I haven't opened up the VBA window. How do I stop this?
View 1 RepliesHow The Vba Code Used For
My Excel File Name "eai.xls" ,when I Click The File , It Open The Sheet Name "menu" With The Inputbox Prompt:="put Your Id"
When The User Put The True Id , It Will Show The Input Box Prompt:="your Password" . If The Password True Will Activate The Sheet Name "data" .and Hide All The Menu Bar.
If The Wrong Id Name Show The Msg.box "re Enter Your True Id " ,that Also For The Wrong Password In Which If User Put More Than 3 Times Wrong , Will Close The Workbook And Exit File.
The User Persons Allow 10 Person Id . Keep In The Table Of The Sheet Name " Id And Password" The Id No. Are In The A1:a10
Password No. Are In B1:b10
This Sheet Name Is Hide And Protect
I need to put together a macro, which will be assigned to a command button, that will prompt the user for a pre-specified password, and, if the password is correct, return a pre-specified value in a different cell. Is there any way to do this?
To put it in perspective, at my company we have approval sheets that need to be signed by several executives that are scattered all over the building. The first executive gets the copy, signs it, sends it off, etc. They tend to dissappear on occasion, so we are looking to make it all electronic, where they can access the file in a shared folder, and the if they enter their password correctly, their initials are input into the specified cell. They can than save the file for the next executive to do the same.
I have a macro that locks the cell (cell rangeis given) after entering data into cell & thereafter if we have tochange the value of cell it asks for password. It works well.
I want somechanges in this macro - currently if I move cursor on locked cell then alsoit prompt for password & i want if i edit that cell by double click or F2then only he ask for password.
I am trying to complete a toolbar that will lock and unlock all the sheets in a workbook. While I can set the password automatically I'd like to have the macro ask for the password instead of hardcoding it.
Here is the code I currently have and works so long as I have already set the password in the workbook to match what is in the macro
I have created a workbook that mostly works with VBA codes. Within the code I have ensured that certain worksheets remain hidden. However, I have also written a macro to access what I called the ADMIN worksheet, which has several commands enabling updates and troubleshooting. Long story short, I would ideally like to prevent users from accessing that worksheet. I have already created a prompt (Msgbox) asking the user if he/she wishes to proceed with the macro but I would prefer being able to have a password prompt to run the macro.
View 4 Replies View RelatedI am trying to password protect user input on a specific text entry, for example if a user tries to enter the letter A they are prompted they require a password (I am trying to do this for authorisation.).
View 3 Replies View RelatedI have created an Excel sheet that retrieves data from a ODBC source. I have created a macro using macro recorder to refresh the data by re-connecting to the database. However, the connection requires a password prompt and when the macro is run, you are still required to enter the password.
Is there anyway to make the macro so that the password is automatically entered and the user will just have to press a button to fully run the query update?
have a password protected spreadsheet with a userform for people to enter data. This allows them to enter data, but stops them from editing or deleteing data once entered.
When the spreadsheet is opened, it asks for a password to unlock it. Hitting cancel allows the user to continue and the userform pops up for the user to enter data. I would like to disable the initial password prompt when the file is opened to avoid confusion on the users part.
Macros are just not my strong suit. I can usually find my answers here but this one has me stumped. I have rewritten this thing everywhich way but loose and this is my latest version.
Sub SetProtect()
'
' protect Macro
' prompts for password protection
'
' Keyboard Shortcut: Ctrl+p
'
Dim Response As String
Dim Answer As Integer
SetProtect:
Response = InputBox("Enter password")
If Response = "safety2" Then.......
i currently have an excel based application with VBA code. I'm trying to add some controls around the app by prompting user for login and password credentials prior to ODBC connection at runtime. So when application is launched, prompt appears, user enters login and password, if correct, it goes on to verify user has ODBC connection at runtime.
View 2 Replies View RelatedWhen I close one excel document, I get prompted for a password.. And it won't close (I don't know the password) The only way I can get it away is by terminating it in task manager. I have read alot of threads in here, where the solutions should be to uninstall Google Desktop..
View 5 Replies View RelatedI have a drop down list full of options for my user to choose. 3 of those options I have message box codes built so that if they are selected, the message box will pop up. However, the first one in the code makes the user click the "ok" box 3 times before it goes away, the second one makes them click 2 times, and the third they just have to click once. to make it where they only need to click "OK" once on each of those?
Here is the
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngIntersect As Range
Dim rngCell As Range
Dim sMsg As String
Set rngIntersect = Intersect(Target, Range("j24:j31"))
If Not rngIntersect Is Nothing Then
For Each rngCell In rngIntersect
If CStr(rngCell.Value) = "E Checking - 105" Then
sMsg = "Please have customer complete E-Statement Application for E Checking - 105 accounts"
Exit For
End If
Next rngCell
End If
When opening a new Excel file, it is asking me for a password to an old excel file that was password protected, which I have deleted from my computer. It is still asking for this password every time I open a new or existing file. When I hit cancel it lets me open the file.
View 11 Replies View RelatedI have a spreadsheet, which has certain worksheets that are password protected. I need to make changes to some of the formulas, and the VBA modules, however I cannot remember the password!! Is there a way of identifying the password??
View 3 Replies View RelatedI am havng problems with the belwo macro code -
Range("G7").Select
Selection.Copy
Workbooks.Open Filename:= _
"Q:PublicPAYMENTS Q&RREPORTSSuspense Activity BUSINESS2008 - Suspense BUSINESS - Activity Reports2008 Avon.xls"
Application.CutCopyMode = False
ActiveWorkbook.Save
ActiveWindow.Close
End Sub
When i open the workbook it requires me to insert a password, i tried to type this but excel will not follow keystrokes, i then inserted the password in cell G7 which i then copy and paste, which you can see the copy at the beginning of the macro.
Is there a way where you can get it to insert the password so i can open the workbook in a macro.
What im trying to do is save 26 suspense spreadsheets by just clicking on a macro.
I have a sheet that is password protected. I have this code attached to a command button. It will unlock the worksheet, autofilter it, print it, unfilter it, and password protect the sheet again. However it is protecting it without a password. I need to have it protected with the password so that someone will not be able to just go to tools to unprotect the sheet.
Private Sub CommandButton1_Click()
ActiveSheet.Unprotect "rainforest"
Columns("O:O").Select
Selection.AutoFilter
Selection.AutoFilter Field:=1, Criteria1:=">0", Operator:=xlAnd
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
Selection.AutoFilter Field:=1
Selection.AutoFilter
ActiveSheet.Protect DrawingObjects:=True, Contents:=True, Scenarios:=True _
, AllowSorting:=True, AllowFiltering:=True
End Sub
In column L on sheet1, I want the user to type in a number. That number will be the number of recommendations that need to be done.
Once "L" is populated I would like the user to be prompted to fill out
-what the recommendation is
-date in should be finished by
corresponding to the number that was typed into "L" which would be listed onto a new sheet. So if the user typed in 3 - I should have 3 recommendations with dates.
On my new sheet, I would like "A" to match "A" from sheet1 for the first one only
"B" would be the recommendation from the prompt
"C" would be the date of that prompted recommendation
Name - Recommendation 1 01/01/10
<blank> - Recommendation 2 02/02/10
<blank> - Recommendation 3 02/03/11
Is it possible to prompt the user for a specific row number to delete in a vba textbox? If yes, then the code would fire using a button. I have the worksheet protected and only want to unprotect through code to delete a specific row number, then protect it again.
View 5 Replies View RelatedI'm in search of a way to prevent people who use a spreadsheet of mine from screwing up formulas. I've hidden rows 10 and 12 in a spreadsheet. i have a TOTAL formula in a cell on row 13 that counts from 10-12. that way, when people insert rows, the total is always right. problem is, people somehow seem still screw it up.
I'm hoping there's a way for me to put a button on the sheet to insert rows. and when the button is pushed, be promted to enter a number of rows. then have it insert that many rows.
Is that feasable?
Thanks!
I've not used Input Box function before. When a user opens my workbook I want to check whether a named range ("Name") is blank and, if it is, to prompt the user to type their name in an Input Box which then returns that value to the named range. This is what I have tried but I don't think I am referring to the named range correctly,
Dim strName
If IsNull("Name") Then
strName = InputBox("Please enter your name", "Name Required", "1")
Range("Name") = strName
End If
I have created an addin that runs several macros. To enable the user to undo any changes, I keep a backup prior to them using any of the macros in the form of a worksheet named back00xx. I want a prompt to be displayed to the user to remove these backups at the closing or saving of the file. The problem is that as an addin, how do I get it to display this prompt as the open workbook is not part of the addin.
Could one have a looping routine that is checking every xx min/sec to check if the current workbook contains any sheets starting back00
Currently I have information that includes numerous distributors information on one sheet. The code below separates each distributors information into a new tab and a new workbook, names the workbook and saves it in the specified file path.
I am trying to figure out a way to use an InputBox to popup and ask the user where all the new workbooks will be saved at. Thus, avoiding the need to change the code each time you want the new workbooks saved in a different folder .....
After recording a macro that goes to last figure in data, how do I edit this to prompt for a new data value and enter it into 1st empty cell at end of data?
View 8 Replies View Relatedexcel macros and only know how to record certain tasks, and then edit after recording the task.
I am working on a project to automate a daily routine task for a company which involves creating a new tab and inputting various datas.
How can I create a macro such that I create a new tab and a combobox appears asking me to input the date in a particular cell?
This is the first in a number of steps for fully automating this process.
So far I only have this to create a new tab.
------------------------
Sub Macro1()
'
' Macro1 Macro
'
'
ActiveSheet.Copy After:=ActiveSheet
End Sub
------------------------
is there a way to make a macro that runs on startup
and prompts with a yes/no question, if the user
wants to multiply all new data values time 1.0825,
and after having selected if they do or dont want
to allow that, would it be possible to have the
prompt minimize itself but still be present in
case they decide to toggle that on/off?
I run a macro to open multiple workbooks and run a macro within those workbooks. All worked fine until a message/input box was included in the individual workbook macros [that I cannot change] to notify the single workbook user when the macro had successfully completed and prompts for an “ok” input.
Can I get my macro to ignore this prompt and not wait for an input – I am currently clicking “ok” everytime it comes up on screen. Have searched help and forum but nothing jumps out.
I have eventually got my Worksheet up and running but now im trying to make things a little easier to complete. The plan is when the Engineer is on site he has to open the Excel sheet to check the tests he has to complete and then mark the results. this is fine but for vaildation he has to sign everthing etc... i made it easier so they only had to fill in one box and it would complete the rest but this seems to get missed more often than not.
SOOO
i want a Screen to pop up when some one opens my excel that says Enter name and contact details. then they submit this which updates the spread sheet with this information and then the engineer can continue as normal.
What is the best option to validate a value entered through the below prompt?
View 4 Replies View RelatedIs there a way for VBA to prompt the user for a new selection?.
For exmaple,
Code:
Sub BlankRow()
The reason I need this is because I am already in a macro and can not change selection on screen and I don't want to exit routine to make new selection (last line of code).
'I need to be able to select new active cell!
ActiveCell.EntireRow.Select
Selection.ClearContents
ActiveCell.EntireRow.Interior.ColorIndex = 1
ActiveCell.Offset(1, 0).Select
Edit.Show
End Sub