VBA To Save And Close Power Point Presenation
Oct 16, 2009I am using the following code to Open a presentation, and run a macro. Everything works fine, but I would like it also to Save the presentation and Close it.
View 7 Replies
ADVERTISEMENT
Copy Tables Into Power Point
Apr 25, 2008I have a question about coping table from exel into ppt, is this posible or not,
PS: i just need to copy a specific range of cells ex. A1 g17 into a slide in pp.
Copying Selections To Power Point With VBA
Feb 23, 2009I am trying to write a routine (via two comboboxes) that will enable users to select a choice of charts from one of three possible worksheets and have the charts on the selected sheet copied to PowerPoint. My difficulties are these:
a. I cannot determine how to pass the selections to Excel (see b. as well)
b. In some instances my charts are actually groups of a chart and a picture. how I should reference these? They are obviously not ChartObjects: when I use the macro recorder all I get is a range.
Selected Range To Power Point Kinda...
Oct 7, 2008I need to be able to send my selected range of cells (to include: the spreadsheet background, colored cells and all values contained) to Power Point for a daily product. I found this great VBA online and would like to use it but the problem is I keep getting funny results. It doesn't matter what cells I select I keep getting a extra margin on the left side and top of the pasted product in power point. I then have to crop the results... I have looked at the macro (from my noodie eyes) and cannot seem to find a way to adjust this added on margin.
View 5 Replies View RelatedLower Screens Brightness To Save Power When Desired
Feb 21, 2012Have a system that runs 8 monitors on one computer. 4 are very large screens. Creates a lot of heat and uses much power.
Is there a way to dim the screens brightness in VBA. Looked all over and can't find any code.
Not really looking for a screensaver as they can cause interrup problems etc if I have programs running for hours. And I can't just turn off some screens as then desktop icons placements get scrambled.
Just want to dim screens with a macro, then undim it. Don't need to have it linked to the mouse movement, but that might be nice too.
I tried a macro that said "Dim MyScreens" but nothing happened.
Excel 2010 :: How To Get Power-query And Power-pivot
Jun 28, 2014How to get Power-query and Power-pivot for Excel 2010?
View 9 Replies View RelatedFinding Smallest Value In Range Close To Specified Calculated Point
Mar 8, 2012Lets pretend that I have a boat load of automatically generated values from a different program.
There's a specific equillibrium point to a certain measurement, but this measurement involves a lot of fluctuation. To get a near accurate result, I must find the maximum value in an entire graph on the Y Axis value(Column B). Ofcourse, this is easily done using the =MAX value
Exactly 450 seconds (X Axis value(Column A)) positively and negatively from this point, something like this happens.
Problems:
A.) I must find the highest points 450 seconds negatively ( X ) to the max of the entire graph.
B.) I must find the lowest point closest to the two points we uncovered, both on the positive ( X -->) side.
C.) The fluctuation of every spike can last to about ±30 measured points in the graph. (±20 seconds) Thus, the maximum point surrounding the +/- 450 seconds (±693 x values) needs to be accurately predicted as being around 450 seconds, not 10 seconds more or less.
D.) The measurement is known to something glitch out and suddenly get a spike somewhere along the road, which will then quickly fall back down, which is a false maximum level. How can I prevent excel from taking this as the maximal point?
Remember, this needs to be fully automated into a macro later on, ergo, I cannot manually add the formulas to all the (650 different) sheets.
I have 25 days before the project gets cancelled if this doesn't make it.
Code, That Disables Save, Save As And Close Commands
Nov 2, 2009Each of the worksheets in my model use A1 as a control cell for any errors and inconsistencies. My aim is to disable save and close commands in case A1 is not equal to 0 in any of the worksheets.
The code I currently use for that purpose is as follows.
Save And Close In VBA
Nov 22, 2006I want adding is a bit of code to save the document. When it saves i want the contents of cells c5 and c7 as the name of the saved document.
So it would be saved as c5 - c7
Sub mike()
'
'
Rows("1:1").Select
Range("B1").Activate
Selection.Insert Shift:=xlDown
Selection.Insert Shift:=xlDown
Selection.Insert Shift:=xlDown
Cells.Select
Range("B1").Activate
With Selection.Interior
.ColorIndex = 2
.Pattern = xlSolid
End With
Windows("HSBC logo.xls").Activate
ActiveSheet.Shapes("Picture 1").Select
Selection.Copy
Windows("Template1.xls").Activate.........
Save And Close Workbook Using VBA
Dec 11, 2013How can i save and close one workbook in excel with vba code.
View 2 Replies View RelatedClose And Save Application
Dec 5, 2008When a user X's (clicks of the X in the titlebar) of a user form, I want to save whatever input has been made to that point and close the application. this is what I tried but it neither saved input nor closed the application
View 2 Replies View RelatedHow To Add Save And Close Button
Sep 3, 2013I know how to add a save and close button but i do not know how to make it instantly available in every new workbook that i open. Currently i click the button and it looks for the macro in the first excel book that i created it in.
how do i make that macro become a default in every workbook?
Save Workbook & Close
Jul 8, 2006One of my computers pulls info from my cash register once everyday (sales info). Then I have a excel monthly sales sheet that pulls the info from the register info and puts it in the right places. So the computer pulls the register info at 9:20pm everyday, then I have my task manager open excel at 9:25 everyday and it has a workbook open macro to automatically pull the info into the excel spreadsheet. Here's my problem-- I need to close it.
I'm sure I could use a workbook close macro, but when it tries to close it won't it come up with a save, don't save, cancel prompt? Nobody will be there to hit SAVE so it won't close? Is there just a macro that could save it then close it?
No To Save On Sheet Close
Jul 24, 2006I have a macro that has to open another worksheet and get data and close the sheet. The problem is when the sheet closes after I have gotten the data it asks if I want to save it. I don't want the user of my macro to see this option because it slows things down. To avoid this in the past I had the worksheet save itself so that it wouldn't ask me to save. Now the worksheet is large and it takes a while to save and it is getting slow. Is there any way not to save it but close it without having excel asking if you want to save it?
View 2 Replies View RelatedSave As In Before Close Event
Jan 16, 2007I need to use the BeforeClose event to save the workbook with the same name when a user closes it. (82 users and they all seem to want to give it their own name.) I have the following code in the BeforeClose event but would like to eliminate the prompt "this file already exists, do you want to replace it" I have tried using the Application.DisplayAlerts = False but this seems to stop the workbook from saving.
I have a public demention called wbName and is set to the workbook name in an outo open macro
Public wbName
Public Sub auto_open()
wbName = ActiveWorkbook.Name
UserForm2.Show
MsgBox "PLEASE do Not insert rows/columns or enter calculations" _
& Chr(10) & " " _
& Chr(10) & "Enter Only Account Name, Date, and Corresponding_ Calls/Details", vbCritical, "Caution"
End Sub
Custom Save On Close Box
Jun 21, 2007Is it possible to stop excel bringing up the save changes box? or replace it with my own custom box? ive tried this code, but it seems to run the userform twice#~?
Application.DisplayAlerts = False
Before_Save.Hide
ThisWorkbook.Saved = False
ThisWorkbook.Close
i triggered it to load on workbook close, but like i say, it seems to run it twice? maybe i need to tell it to only run once or something?
Save As Shared On Close
Aug 14, 2007When a supervisor goes into one of my sheets and adds some things in, she quite often forgot to share it again. To try and combat this I added the following code:-
Private Sub Workbook_BeforeClose(cancel As Boolean)
Dim myworkb As String
myworkb:
myworkb = ThisWorkbook. Name
If myworkb = "SLE.MasterSheet.SLE1.xls" Then
Call NoProtection
ActiveWorkbook. SaveAs Filename:="SLE.Mastersheet.SLE1.xls", accessmode:=xlShared
End If
Call Limpa
Run "DeleteMenu"
End Sub
The code appears to do everything it should, and when I first ran it appeared to be ok. However, now it appears to save it as shared yet when you go back into the file it opens up as exclusive.... Is there a reason why the code wont "share" ?
Close And Save File After Timeout?
Jun 7, 2013i would like my sheet to save and close if left inactive after 10 mins, code would be nice
View 2 Replies View RelatedAutomatically Close File And Save Changes With A New Name
Jun 13, 2009I am trying to fix is that I have two computers networked together both with multiple users all with access to the report form that I am using which is in the shared file. If I have been working on it (I am still trying to do improvements when I have time), and I have to leave for a fire or forget to close the report, no one can access it other than with read-only.
My idea was to run some type of code that either when the screen saver comes on or after so much time with no activity, it would close and save the file with a new file name(just in case I don't want the changes that I have made in the code or something).
Save Backup Of Workbook Before Close
Dec 15, 2009I call the macro below from a Workbook_BeforeClose sub; however, if the user has not saved changes before they hit the close then the Sub SaveFile runs and then after the backup save they are then asked do you want to save changes.
I initially had this sub run with Workbook_BeforeSave, but I don't really want to run this everytime the user selects save.
Any ideas on how to how the save changes first and then the backup?
Close On Specific Worksheet Before Save
Jan 26, 2010I've seen the code to open a workbook on a specific worksheet, but can this be done when closing. I tried:
View 3 Replies View RelatedVBA - Close And Save File After 5 Minutes?
Jan 24, 2014At work we use a spreedsheet to control our holidays. The problem we are having is the file is stored on a network and some people are opening the file and not closeing it once done with, this is locking out others from using it.
Is there any VBA code that will close the file, if not used in say 5 mins
Save, Close, Then Reopen Workbook
Oct 2, 2007I am testing the following section of code.
Sub Macro1()
Dim NewWB As Workbook, NewName As String
Set NewWb = Workbooks.Add
NewName = Application.GetSaveAsFilename(ThisWorkbook.Name)
NewWb.SaveAs NewName
NewWb.Close False
Workbooks.Open (ThisWorkbook.Path & "/" & ThisWorkbook.Name)
End Sub
It seems like I need to rename the sheet I am working on in order for this code to work. If I do not, it tells me that it "cannot save this workbook with the same name as another open workbook".
I am trying to use this code to get around an error with Excel described here: [url]
I would like to have the sheet save itself (not "Save As"), close, reopen, and continue running the macro. What adjustments do I need to make to this code to do this. I have tried different things, but I must be getting the syntax wrong.
Close Workbook Without Save Changes Dialog
Jan 9, 2009I'm not sure what I'm missing here, but I am trying to exit a spreadsheet using VBA code without saving changes.
The following code, to my mind, should work, but I keep getting a dialog asking if I want to save changes.
'* ensure workbook does not request user to save it...
ThisWorkbook.Saved = True
'* exit Excel...
Application.Quit
Error Handling (Close Without Save)
May 12, 2009I've got some code that reformats a file that a supplier sends us. They seem to randomly change the structure, so I'm trying to make the code a bit more robust.
Part of the code uses MATCH to look for specific column headings, so I've got some error handling around this of the format:
On Error GoTo NoIncCol
Line using MATCH
On Error GoTo Exiting
where Exiting is my standard error handling (Close without Save) and NoIncCol is the same, but with an error message saying that the term the code was trying to MATCH can't be found. This works well for me.
In another part of the code, I need to check for another column heading, which so far has turned up in two different forms. At the moment I'm doing this as follows:
With Sheets("Sheet1").Range("1:1")
Set rFound = .Find("Term1")
If Not rFound Is Nothing Then
a = "Term1"
Else
This feels a bit clunky, and I don't really like having what is essentially error-handling in the middle of my code. But the only other way I can think of to do it is to use a GoTo, and I believe that's not really considered good practice either.
Save As And Close Active Workbook
May 13, 2009I am trying to create a form button that will save as and close the active workbook. I have the Save As code working but I can't find any code to close the workbook that will work. A couple of issues: I don't have control of what the workbook is called - the user will name it - so I can't do a simple Workbooks (" ").Close. Also, I don't want to quit the application. I don't know if the user will have other worksheets open. I also tried ActiveWorkbook.Close and that didn't seem to work either. Not sure what I am doing wrong.
View 9 Replies View RelatedClose Application Without Save Prompt
Nov 14, 2006Is there a code I can use, through a private command button, that will exit the Excel program (not just the current workbook) without asking to save?
View 3 Replies View RelatedClose Workbook Without Save Prompts
Oct 2, 2007Workbook 1 has references to workbooks 2,3,4,5,6. When I click the top cross and choose Save All with Workbook 1 active, the deactivate event in workbook 6 runs to the end as it tries to close, but it can't close because workbook 1 references it. So nothing further happens until I click the top cross again. Then everything closes without any more prompts. Not good. If I could ensure workbook 1 closes first that should solve the problem. There may be another way of course.
I have attached 2 blank files to show the problem. test1 references test2. Open test1. It will open test2. Make a change to both files, activate test 1 and click the top cross, choose save all. Nothing happens usually.
Close Application Without Save Message
Dec 13, 2007Application starts with a button on an otherwise empty spreadsheet. Then opens a user form. After I close using a button on the form. My close routine closes the worksheets and workbooks. I then quit the application and I get a message asking if I want save the original spreadsheet.
View 6 Replies View RelatedRemove Autofilters Before Save & Close
Jun 11, 2008I have an issue where users to a work book are selecting autofilter and then saving the document with rows filtered out, which I wish to prevent or at least warn them to remove the filter before allowing the save function.
The document is never 'Save As', it's always 'Save' from the toolbar icon.
They should be permitted to save the document, but only after this check has been completed and a message issued if the filter is on.
