Copy Tables Into Power Point
Apr 25, 2008I have a question about coping table from exel into ppt, is this posible or not,
PS: i just need to copy a specific range of cells ex. A1 g17 into a slide in pp.
ADVERTISEMENT
Copying Selections To Power Point With VBA
Feb 23, 2009I am trying to write a routine (via two comboboxes) that will enable users to select a choice of charts from one of three possible worksheets and have the charts on the selected sheet copied to PowerPoint. My difficulties are these:
a. I cannot determine how to pass the selections to Excel (see b. as well)
b. In some instances my charts are actually groups of a chart and a picture. how I should reference these? They are obviously not ChartObjects: when I use the macro recorder all I get is a range.
Selected Range To Power Point Kinda...
Oct 7, 2008I need to be able to send my selected range of cells (to include: the spreadsheet background, colored cells and all values contained) to Power Point for a daily product. I found this great VBA online and would like to use it but the problem is I keep getting funny results. It doesn't matter what cells I select I keep getting a extra margin on the left side and top of the pasted product in power point. I then have to crop the results... I have looked at the macro (from my noodie eyes) and cannot seem to find a way to adjust this added on margin.
View 5 Replies View RelatedVBA To Save And Close Power Point Presenation
Oct 16, 2009I am using the following code to Open a presentation, and run a macro. Everything works fine, but I would like it also to Save the presentation and Close it.
View 7 Replies View RelatedExcel 2010 :: How To Get Power-query And Power-pivot
Jun 28, 2014How to get Power-query and Power-pivot for Excel 2010?
View 9 Replies View RelatedFilter Data Into Groups That Contain A Common Data Point Using Pivot Tables?
Apr 30, 2013I want to use a Pivot table to filter data to show just the studies that contain patients from the 'South' area?
As per example below I want to be able to see all the patients in all areas but only for studies that have patients from the south. I put together an array formula that works well for small tables but is too much with one one my sheets that contains 200,000 rows.
Before filtering:
Study ID
Study Short Title
Study Patient ID
Area
1346
LLP
90126
Northwest
[code]....
Automatically Change The Point Name To Match The Point Name In Column
Dec 10, 2008I have a pivot table as shown below which is pretty straight forward however I am trying to create a macro that will automatically change the point name to match the point name in column E then copy that resulting dispaly to another sheet then pick the next point name in line and do the same thing and repeat for 50 rows, so my end result will be 50 pivot tables ready for printing. I can do this manually but I am trying to make it automatic...BTW the point names in column E change everyday but the pivot table supports the name changes.
Option Explicit
Sub PointName()
Dim Ws As Worksheet
Dim Rng As Range, Cel As Range
Set Ws = ActiveSheet
Set Rng = Range(Cells(2, 7), Cells(Rows.Count, 7).End(xlUp))
For Each Cel In Rng
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Ws.Columns("A:B").Copy
Sheets.Add
With ActiveSheet
.Paste
.Name = Trim(Cel)
.Range("A1").Select
End With
Next
Ws.Activate
End Sub
I turned it off for a while and when I turned it back on I am getting an error
Unable to set the _Default property of the PivotItem class
Debugger is highlighting
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Copy Data To A Common Start Point
Oct 24, 2006I have a range of data that has been collected by date starting in H4 across several columns. This means that my entries start at different points in each row i.e. -
Row 4 first entry Column AJ
Row 5 first entry Column K
Row 6 first entry Column AB
Using vba is it possible to find the first entry in Row 4 and copy it and all the figures following it in that row to K4 on Sheet2, and then row 5 to K5 on Sheet2 and so on?
Copy Pivot Tables To A New Worksheet
Nov 5, 2009I have a workbook with a lot of commercialy sensitive data. I have created various pivot tables from that data which I want to copy to a new workbook without retaining the link to the original data, so I can send it to a number of suppliers.
View 8 Replies View RelatedCopy & Paste To Word Tables
Oct 17, 2006I need to know how to open and manipulate a Microsoft Office document using code in Excel.
I have a list of Names in an Excel column that I am trying to paste into a Word table (formatted as Avery labels). Each name goes in a different table cell in Word. Example: Copy from "B5" in Excel and Paste into the first cell in Word, copy from "B6" in Excel and Paste into the second cell in Word, etc.
I know the code needed within Excel and I also know the code in word used to setup the table format. I just need to know how to "call" it from within Excel and how to copy/paste back and forth.
Copy Data To Another Sheet With Multiple Tables
Jan 29, 2012I have one sheet with 25 tables in it, And i want to extract the whole row from this sheet to another sheet based on values ( Office1, Office2, Office3, Office4 ) if appeared in thrid column "C".
- the 25 tables created on the 1st sheet to be in the other sheets as formatted as well.
- once "Office1" appeared in the original sheet in the 1st table, Action : copy the whole row to sheet named "Office1"at the top row in the first table.
- once "office1" appeared again in the original sheet in the 1st table, Action: copy the whole row to sheet named "Office1"at the 2nd top row in the first table.
- once "office1" appeared again in the original sheet in the 2nd table, Action: copy the whole row to sheet named "Office1"at the top row in the 2nd table.
- and so on, the same with other 3 remains sheet.
Copy Filter Selection To All Pivot Tables
Jul 31, 2006I want to create multiple pivot tables each performing its own tasks. When i want to filter a particular category in all first pivot tables i have to do this one by one.
This is time consuming and i think it can be done faster. Is it possible when i filter a category in pivot table 1 that this filter is automatically filtered in the other pivot tables?
Copy Tables From Multiple Sheets To One Worksheet
Sep 24, 2007I need, I do not know Visual Basic, so I need something in simple Excel format that I can use before I am able to take the training (upon reading more threads, looks like VBA is just the editor used to create a macro where I can copy and paste in code text from your suggestions? I think I can handle that).
I need to condense multiple tables into one master table, and then perform calculations on those entries. Each table contains three columns, but after being manually pasted -- as I am doing currently -- into the condensed worksheet, there'll be two or three additional columns based on calculations from the entries. The Workbook does currently contain 2 worksheets that do not contain data in this format, so please share code that could exclude those? I am fine with every so often manually applying a formula on the last worksheet that says something like,
look in SH1 A2:C300. If entire row is not blank copy over contents, if blank move on to SH2, etc etc. Since I'm a newbie I imagine there are much more efficient ways to do this. I may be a little shaky on the VBA but surely I can copy and paste.
Tan To The Power Of Minus 1
Dec 10, 2008How can i produce "tan to -1 " in excel ?
View 9 Replies View RelatedMore Sheet Power
Jun 27, 2006im building a fairly intricate workbook at the minute but it is starting to slow down significantly lately as ive added more fromula's and sheets. I was hoping to make it even bigger but it looks like i might be stoped in my tracks. I have a reasonaby powerful computer and excel 2003. Does anyone know a way i could increase the capacity of this one particular workbook as it will be used by many people to enter data daily.
View 3 Replies View RelatedMacro To Copy Data Within Excel Into Tables In A Word Document
Jan 25, 2010Currently I am going back and forth between an excel document and a word document cutting and pasting values from the excel spreadsheet into tables in word. The task is a regular occurance therefore I wish to create a Macro that can automate this procedure. Both the excel and word documents are fixed templates therefore once a Macro is created it can be applied to all future work of similar nature.
Each table in the word document contains 6 rows of values in a single column. The excel data is arranged in a table that is 6 rows by x number of columns (how ever many sets of values there are for the particular job) therefore x determines how many tables must exist in the word document. I move between the excel and word document cutting and pasting each column into each table. This is not so time consuming if x=10 however on occasion x=100+ and it does take time.
To Find The Power ( I.e. ^ N) When You Have Other Variables
Mar 12, 2009To find the power ( i.e. ^ n) when you have other variables.
Mathematical Perspective as well as through EXCEL..
Ex: 5^n = 125
We know that 5^3 = 125,
Now if I have been given the value 5 and 125 , then how do i get the answer 3 ( i.e ^ n) value...
I need to solve a slightly complex issue and therefore need help for the above requirement as well as to get the "n" value..
Excel 2010 :: Creating Multiple Tables In VBA And Referring To Newly Created Tables?
Jul 1, 2013Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
Nested IF Formula (If Value In Cell R5 >0 Then Get The Value In Cel X29 On Power 4)
Jan 12, 2010I am trying to do a nested if formula but I can't get it to work.
The condition is: If value in cell R5 >0 then get the value in cel X29 on power 4.
=IF(R5>0,POWER(X29,4)
Type Numbers To The Power Of Number?
Jul 14, 2002how can I type numbers to the power of something Say 12 to the power of 3. I want the 3 to be smaller and up off the line is that possible
View 3 Replies View RelatedMathematics - Power Trend Lines?
Jan 23, 2014I am trying to fit a cooling graph with a trendline and I have found the power line to fit the best, as well as corresponding with Newton's law of cooling. However, I am not savvy enough to discuss how similar or dissimilar the two equations are!
the resulting equations from two different curves are as follows:
y=4305 x^-0.87733
y=4025 x^-0.91004
both fits have an R^2 of 0.996.
I am analyzing two scenarios of cooling the same object with three variables, one intended (the extraction of energy using water flow in one case, and no extraction in the other) and the others not under my control: different starting temperatures and different ambient temperatures. I need to understand if these are generally the same curve, or how very different are they? is there any statistical way to represent their relationship?
Combination Of Pairs, Power And String
Aug 8, 2006I have a string of n pairs and want to check various combination of that string.
Example: Pairs 58 78 15
Since I know I have 3 pairs (but it can be 2 or 4), I know the number of combination I want to test, ie 2 power 3 = 8 combinations. How can I program a code creating the various strings, ie 587815, 587851, 588715, 588751, 857815, 857851, 858715, 858751 ?
This is what I have so far (not much):
Public unique_pair 'number of pairs provided by another macro
Public mystring 'provided by another macro
Sub make_guess()
Dim number_of_combination, i
number_of_combination = 0
number_of_combination = 2 ^ unique_pair
For k = 1 To number_of_combination
'how to generate the various string ????
Next k
End Sub
Power Pivot Chart With Stacked Column
Jul 30, 2014I have created a Power Pivot Chart with Stacked Column chart. Made one axis as Secondary Axis and the axis is Clustered Column, but it is overlapped with Stacked bars.
Is there any easy way to solve this issue, apart from creating 2 dummy columns and making it work.
Using Power Query To Do Multiple Searches On Website?
Jul 10, 2014I've been trying to get power query to search a list of parcel numbers on an assessor site: [URL]. The problem I'm getting, every time you put in a different parcel number, you get the same URL for the results. I want to extract just a few pieces of information for each parcel search, but I can't initiate a search through excel. I'm thinking the problem is in the Data source settings. How can just get it to show me the assessors page results for a single parcel search in excel?
View 5 Replies View RelatedSuspend/hibernate Sheet To Free Cpu Power
Apr 28, 2007how to suspend/hibernate some specific sheets in one workbook , to free cpu power?
View 5 Replies View RelatedFill Chess Board Matrix To Power Of 2
Jun 3, 2007i would like to write vba to fill a "chess Board" Matrix (8X8) With Powers Of 2...
starting with 2^0 and ending with 2^63...
(i suppose, click a button/icon and have the numbers fill in/populate...)
Lower Screens Brightness To Save Power When Desired
Feb 21, 2012Have a system that runs 8 monitors on one computer. 4 are very large screens. Creates a lot of heat and uses much power.
Is there a way to dim the screens brightness in VBA. Looked all over and can't find any code.
Not really looking for a screensaver as they can cause interrup problems etc if I have programs running for hours. And I can't just turn off some screens as then desktop icons placements get scrambled.
Just want to dim screens with a macro, then undim it. Don't need to have it linked to the mouse movement, but that might be nice too.
I tried a macro that said "Dim MyScreens" but nothing happened.
VBA Code To Configure Windows Power Management Settings
Jun 25, 2009Is it possible to modify the windows power settings in excel vba. I have this example, but it doesn't do anything.
Sub testPOWERCFG()
CreateObject("WScript.Shell").Run "POWERCFG /CREATE Custom1", 0, False
CreateObject("WScript.Shell").Run "POWERCFG /CHANGE Custom1 /monitor-timeout-ac 15", 0, False
CreateObject("WScript.Shell").Run "POWERCFG /CHANGE Custom1 /monitor-timeout-dc 10", 0, False
CreateObject("WScript.Shell").Run "POWERCFG /SETACTIVE Custom1", 0, False
End Sub
I need some code to create and activate a scheme whereby everything is on and also some code to revert back to the default settings on the machine.
Excel 2013 :: Power Pivot Summarize Value By Category From Total?
Apr 17, 2014Using Excel 2013.
Trying to create a Calculated Column in a table to put Expense in 1 of 4 categories
I came up with =CALCULATE(sum([TotalExpense]),FILTER(factExpense,factExpense[ExpnseType]="Sundries"))
But that is returning total instead of a total for each record What did I miss?
This works for the first Calculated column: =CALCULATE(sum([TotalExpense]),FILTER(dimExpense,dimExpense[Type]="Sundries"))
But as soon as I copy the formula to the next column and update the type to "Wines_Spirits" I get
A circular dependency was detected
Found the answer on SQLBI website I added a unique id to each row and in Table Behavior in the Data Model set the Unique_ID as the Row_Identifier
[URL]
Excel 2013 :: Power Pivot DistinctCount If Another Field In Table Is Greater Than Zero
Apr 21, 2014Using Excel 2013.
I am trying to get DistinctCount from a field if another field in the same table is greater than zero.
PowerPivot DAX -COUNTIF
[Code] .....
The count returned includes all not just values greater than zero. How can I get just values greater than zero?