I have a macro that I recorded which is supposed to copy the contents from row 38 of my calculate sheet and paste the values of it below the last record on my monthly summary tab but it is not pasting below the last row of data. It keeps pasting to the top record. My code is below:
Code:
Sub Copy_Record()
'
' Copy_Record Macro
[Code].....
The following code is doing what I want it to do in part, its copying the data in range k3 to q3 to the next empty row in columns a to f
It works when I change any cell in column K (11), I want to change to only on a change in K7 or K8? As an afterthought if I'm dealing with the same sheet do I need to make reference to sheet2?
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim nextRow As Long
If Target.Column = 11 And Target.Cells.Count = 1 Then
[Code].....
I am doing a financial statement for a person but I did not create the workbook. The book has two sheets linked together. I am overwriting the names and numbers from last year's form. I have run out of lines on the first sheet and don't know how to copy and paste the macro to the bottom of the sheet so that I can carry on with inputting my numbers. Here is a sample of the workbook.
View 4 Replies View RelatedI am getting ready to create a spreadsheet to list vendor's names and emails along with other data. I would like to include at the bottom of the email addresses a quick copy and paste distribution list. I have achieved this in the past by using a similar formula:
View 4 Replies View RelatedI'm looking for a simple piece of code I can use to manipulate the data on the attached workbook. Firstly, I need to be able to sort the data by column O ("Balance"). I then need the code to extract all the information for the top 10 and bottom 10 rows and paste the info into a new worksheet. The code will need to account for the fact the number of rows might increase/decrease with this report.
View 2 Replies View RelatedI would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies View RelatedI'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedHow to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
I have a sheet named "Fittings Summary" with an export button. I need some code that will copy range A1:G38 of the fitting summary sheet then open a dialogue box asking for the following "Please Enter Tag No" once a tag number is entered I would like a new sheet to be created in the same workbook named with the tag no entered previously then the copied cells pasted into it. I would like to keep the formatting of the cells but not the formulas within.
View 10 Replies View RelatedI would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies View Relatedi want to copy a row from one sheet and paste it in another sheet based on a condition.
View 5 Replies View RelatedI have set up a workbook with sheets named for each month.
I have 70+ separate excel files (one for each month) that each have a single sheet I want to copy into the new workbook's corresponding month sheet.
Each file is named different but the name of the sheet in those files that I need will all be the same.
Is there a way I could sit in the sheet I want it pasted to, run a macro that I can point to the correct file/workbook -- preferably without opening -- and then have it copy the contents of the sheet I want (again, will always have the same sheet name).
I want the sheet copied with formatting and all, an exact copy.
This link seemed useful - if i could control which sheet it copies more easily since for me the source data always has a different file name. [URL] ........
I thought I lost that original message so I rewrote everything - differently - then I saw the restore button so I'm leaving both phrasings.
I would like to know if there is a Macro that could ask me which workbook to copy from, select the sheet in that workbook called CAP (sheet will always have the same name but I need to copy the sheet from 70 different files/workbooks) copy the whole sheet with formatting and all, and then paste it in my active sheet on the new workbook I am in.
I want to take data about a particular partner we have (CAP) out of the monthly summaries for the last ~72 months (which each have their own file/workbook) and put them all in one workbook just for this partner, on each sheet by month still.
I am only interested in automating everything I have to do for 1 month, but in a way that would easily let me do it again for the next month, and the next and the next, 70 times.
But a Macro would still be easier than opening each file, going to the sheet I want, copying everything, going back to my new workbook, pasting everything, closing the extra workbook, then doing that ALL again 70 times.
Is there a vba codes to copy all data from sheet 1 to 5 in workbook to sheet 6 same workbook? and paste it as value.
View 5 Replies View RelatedI have spent ages creating a work diary and have protected the sheets using VBA however on finishing the sheet one important thing that needs to happen is the ability to copy and paste information from the boxes to another worksheet. i.e MONDAY - SUNDAY
View 1 Replies View RelatedMacro Button to copy and paste from different sheets, I need to Copy SKU which is in Sheet 1 Column B and Find in Sheet 2 then Copy the UPC on Sheet 2 and Paste to Corresponding SKU in Sheet 1 Under Column C. If an SKU doesnt show on Sheet 2, it should leave Sheet 1 Column C blank and go on with others.
View 3 Replies View RelatedI have a requirement to copy a few column(like a,d,e,f) from sheet1 and paste it to sheet2 column.
where column a of sheet1 will be copy to column d of sheet2.if anything data is already there then overwrite that column.
What I'm looking to do is copy sheet named January, and paste into a new sheet naming it February, then in February copy and paste into another new sheet naming it March and so (but keeping previous months). My thinking was a pop up to name the sheet to copy then another to name the sheet that it's pasted in.
View 2 Replies View RelatedI want to copy data from the current sheet, and past it in the "montly" sheet.
'i and j were defined above, with a Case statement
Range(" Ai:Cj").Select
Selection.Copy
Sheets("monthly").Select
' I want the upper left cell of the pasted area to be A11
Range("A11").Select
ActiveSheet.Paste
I get an error saying that I should select one cell and then paste. But I thought that that is what I did...
First off I have an excel sheet that I have split into two windows. excel sheet.jpg
I am looking for a formula that will change the bottom sheet number a color if it exists on the top sheet.
Copy and paste to a different sheet. This is what i have
View 2 Replies View RelatedI have this piece of code that copies a block of cells from sheet B to sheet A.
View 14 Replies View RelatedI have 2 sheets, I want to paste the data from sheet2 to the bottom of sheet1... However the number of rows change each day on sheet1, so the cell that the paste happens too changes each day. Also I will need to do this to a few different sheets, so if you could make this universal and put in the comments in the formula.
View 2 Replies View RelatedI have a data in Sheet 1 (only in Visible Cells), in that i have to filter for AA and copy data from AZ10, then i have to again filter in Sheet 2 for AA and paste in Sheet 2
View 1 Replies View RelatedIn case column C starting from row 3 to end, if any cell contain number ie numeric value then copy the entire row to a new sheet named "stmt" starting from row 2 ie start pasting from row 2 of "stmt" sheet.
View 9 Replies View Related
