Copy Data In Row And Paste To The Bottom Of Another Range?
Aug 2, 2012
The following code is doing what I want it to do in part, its copying the data in range k3 to q3 to the next empty row in columns a to f
It works when I change any cell in column K (11), I want to change to only on a change in K7 or K8? As an afterthought if I'm dealing with the same sheet do I need to make reference to sheet2?
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim nextRow As Long
If Target.Column = 11 And Target.Cells.Count = 1 Then
[Code].....
View 2 Replies
ADVERTISEMENT
Oct 12, 2012
I have a macro that I recorded which is supposed to copy the contents from row 38 of my calculate sheet and paste the values of it below the last record on my monthly summary tab but it is not pasting below the last row of data. It keeps pasting to the top record. My code is below:
Code:
Sub Copy_Record()
'
' Copy_Record Macro
[Code].....
View 9 Replies
View Related
Feb 3, 2010
I am getting ready to create a spreadsheet to list vendor's names and emails along with other data. I would like to include at the bottom of the email addresses a quick copy and paste distribution list. I have achieved this in the past by using a similar formula:
View 4 Replies
View Related
Aug 1, 2014
I have many rows of data 6 columns wide. I want to be able to enter data into a specific section, then run a macro to "cut-and-paste" that data onto the bottom of my existing data (with one empty spacer row between the new and existing data)
Here's what I have so far:
[Code] ....
Basically the part I need working on is changing [ Range("A101:F130").Value ] to be dynamic. For the code to determine the last row of data, move 2 rows down, and paste the block there.
View 6 Replies
View Related
Apr 25, 2014
I am using below code to copy data and paste after a certain row. I want in below code first copy data Range("C4:R46") and paste it automatically 50 times after 43 rows but with this condition.
[Code] ......
View 2 Replies
View Related
Dec 18, 2008
I need a macro that will copy a selected range from an existing worksheet in a workbook and paste the data to the last row in another workbook on a particular worksheet.
View 7 Replies
View Related
Jul 14, 2006
I have tried using the below mentioned macro. However, it only work on one cell. I need to copy and paste a range from A1:Q200.
Sub retrievedata()
Dim wbResult As Workbook, wbSource As Workbook, CopyRng As Range, Dest As Range
Dim FileName As String, Filt As String
Set wbResult = ThisWorkbook
Set Dest = wbResult. Sheets("Data").Range("A1:Q200")
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Filt = "All Files (*.*),*.*"
FileName = Application. GetOpenFilename(Filt)
Set wbSource = Workbooks.Open(FileName)
Set CopyRng = wbSource.Sheets("Summary").Range("A1:Q200")
Dest = CopyRng
Application.ScreenUpdating = True
Application.DisplayAlerts = True
wbResult.Activate
wbSource.Close
End Sub
View 3 Replies
View Related
May 28, 2014
I have a range of cells with data from one day. This range is "C36:K63"
Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.
Thus, day two should copy "C36:K63" into a new range: "C65:K92"
As you can tell, the rows will change each day, but the columns will always remain the same.
How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?
i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.
View 2 Replies
View Related
Oct 16, 2009
I previously posted a problem related to copying data from one sheet and paste it in another workbook when "Delivered" is chosen from a drop down menu. Everything works fine with my dummy files, but a problem comes up when I try to incorporate this code into the original file.
The issue is that once the code copies the info from the range A3:D3 it has to paste it into different cells in the other workbook.
Please see the attached file to see where I need the data from the range A3:D3 to be pasted.
View 7 Replies
View Related
Aug 8, 2006
Ive been trying to find out how i can paste information in the next available column but between certain columns. Here is an example of what im trying to do. There is a calculator which represents 3 machines. It runs different senerios if you change the % of product going into it (cells to change this are light blue). What im trying to do is take the information the machine outputs to the right and organize it on the next worksheet.
The data on the next worksheet is a combination of all the machines performance (in yellow) together and the machines personal performance (in red). when the button is pushed currently, I have the overall scenerios information filling down rows. What I would also like it to do is see if im using a machine (because it can be turned off by changing the usage to 0%), and if I am, copy the results form the individual machine to the next worksheet. When it copies it needs to see if the first machine slot is open and if not the second and paste in the available location. I cant have a specific spot for each machine on the real worksheet cause there are maybe 100 machines and if 15 are used I only want the first 15 machine info slots filled and im gonna hide the rest of the columns. The way the columns fill also cant be like the rows where it looks for next available free spot. It has to only be for the specific range in red because there is info to the right of where this is going.
Sub Send_Data()
Sheets("Calculator Sheet").Select
Range("AD9, AE9, AG9").Copy
Sheets("output sheet").Select
Range("B65536").End(xlUp).Select
ActiveCell.Offset(1, 0).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
View 2 Replies
View Related
Jul 30, 2009
I'm looking for a simple piece of code I can use to manipulate the data on the attached workbook. Firstly, I need to be able to sort the data by column O ("Balance"). I then need the code to extract all the information for the top 10 and bottom 10 rows and paste the info into a new worksheet. The code will need to account for the fact the number of rows might increase/decrease with this report.
View 2 Replies
View Related
Sep 4, 2006
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
View 9 Replies
View Related
Oct 23, 2008
I have a s/s encompassing over 350,000 rows.
Data consists of a series of ranges from columns A:N and rows varying in number between 3 and 30.
There are two blank lines between each range of data.
Each range is (with exception) numerically ordered down column H (e.g, 1, 2, 3, etc).
Problem: there are around 1100 occasions when a range contains a row of data which is to be disqualified from consideration. On these occasions the data always appears in the top row of the range and is identifiable in column H by the nine codes 111, 222, 333, 444, 555, 666, 777, 888, and 999).
I wish to find a macro which will :
1. where the top row of a range in column H is one of the codes 111 to 999, transfer that row of data to the bottom of the range.
2. delete the now empty top row from which the transfer was made from.
3. insert a new blank row at the bottom of the range below the row which the data was transferred to (in order to maintain the two blank rows above and below each range).
View 12 Replies
View Related
Aug 29, 2008
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
View 4 Replies
View Related
Feb 5, 2014
I have used a formula to achieve this before which seemed to work although now it seems to be replacing other data already in the worksheet so I am unsure of how to fix, thinking I should just start again.
The file in question is a tracker of activities, Column A (sheet1) is the Status and once the status is "Closed" I need to run a macro that copies all closed activities to Sheet5 at the bottom of previous closed activities. Once this is done I already have a macro to delete all "closed" activities from Sheet1 meaning that it is vital the new closed activities stack onto the bottom of previous closed activities.
The Column Headers start on Row 11 with activities running from Column 12.
View 1 Replies
View Related
Mar 26, 2012
Copy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
View 4 Replies
View Related
Jan 19, 2012
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
View 5 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Nov 25, 2012
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
View 2 Replies
View Related
Mar 16, 2013
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
View 4 Replies
View Related
Oct 7, 2009
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies
View Related
Oct 2, 2008
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies
View Related
Feb 19, 2008
I have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
View 4 Replies
View Related
Mar 3, 2008
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
View 4 Replies
View Related
Mar 27, 2014
Is there way I can copy the BOTTOM cell amount in a specific column, to another specific cell in another workbook?
I update a worksheet with a new row of data each day. I want to copy only the last (bottom) entry from one column over to a worksheet in another workbook. I'm hoping I can just put something in the cell I want to copy to, to reference the bottom cell with data I'm copying from.
View 2 Replies
View Related
Feb 24, 2013
im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
View 3 Replies
View Related
Jul 16, 2009
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies
View Related
Apr 9, 2014
From E15:E150
Start with E16 and if it is blank than make it the same as the value above (If E16 is blank than E16 would have value of E15)
If it has a value than skip and go to next.... all the way through E150.
So an example would be:
E
15 ABQ
16
17
18 MFE
19 AUS
20
21 HOU
22
23
24
25 ATL
26
and so on
Would look like this after macro
E
15 ABQ
16 ABQ
17 ABQ
18 MFE
19 AUS
20 AUS
21 HOU
22 HOU
23 HOU
24 HOU
25 ATL
26 ATL
and so on
View 5 Replies
View Related
Sep 21, 2005
can somone tell me why the attached code will not work it works for the first
range only but when others added it fails also how do you clear outline of
copied cells, i used range ("D9").Select but no good.
-- Private Sub Workbook_Open()
Workbooks("Staff Details").Activate
Range("I4:I10")("C4")("C9")("G9").Select
Selection.Copy
Worksheets("Payslip").Activate
Range("B2:B8", "C11", "K11", "K12").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone,
SkipBlanks _
:=False, Transpose:=False
Range("D9").Select
End Sub
BD3
View 10 Replies
View Related
May 8, 2007
I need to paste in sheet2 in rows 8 to 19
Rows 1 to 7 in sheet2 might stay empty.
[A20].End(xlUp) takes care of the 19th row .. how can I adjust the range to start at row 8 ?
Sub CopyBoldCells()
Application.ScreenUpdating = False
Dim rng As Range
Range("A1:A10").Select
For Each rng In Selection
If rng.Font.Bold = True Then
Rows("" & rng.Row & ":" & rng.Row & "").Copy
Sheets("Sheet2").Select
[A20].End(xlUp).Offset(1, 0).Select
ActiveSheet.Paste
Sheets("Sheet1").Select
End If
Next rng
Application.ScreenUpdating = True
End Sub
View 9 Replies
View Related
