my data is formed of 2 columns column 1 (currency) & column 2 (balance)
i am writing an array formula using the vlookup function, the formula enables me to add all balances after converting them to $. i dont know whats wrong with my formula
please find attached an example of ....
I have the following information (small sample only):
CodeItemList
162AVS0001 AVS0001
162AVS0002 AVS0003
162AVS0003 BUD0002
162AVS0005C5O1208
102BRE234CAL0007
102BRE-508EQU0003
102BRE-AB09 FXUK21916/2
162BUD0002GMC0003
162C5ENV-TNT HSS0001
162C5O1208 HSS0006
162CAL0005 IBM0003
162CAL0007 KUN0002
The list on the right is derived from the following array formula which has been copied down the column to end of the data range:
{=VLOOKUP($G$130, INDEX(G133:I252, SMALL(IF($G$130=INDEX(G133:I252, , 1), ROW(G133:I252)-MIN(ROW(G133:I252))+1, ""), ROW(1:1)), , 1), 2, FALSE)}
$G$130 refers to a value in that cell which is user defined from a drop down list and in this instance, the value is 162. Therefore, I would expect to see all of the items that contain 162, under the list column. As you can see, it has not returned all of the values relevant to 162. It has missed AVS002, AVS005 C5 ENV and CAL0005 in this example. The ommissions seem random
I am getting the hang of this formula array stuff but I have another issue. I have gotten this to work in the actual Spreadsheet but when I try to put that same string into Code I get an error. I am trying to add a Vlookup into an Formula Array. I am building a new sheet and adding this to the sheet to do the calculations. I was able to get the code to work fine until I added the Vlookup section. I am doing this in small sections to make sure each part works. I am getting "unable to set the FormulaArray property of the Range Class" error message.
NewSheet.Cells(CurrRow, 4).FormulaArray = "=IF(ISNA(INDEX(FY08Rates!A:F,MATCH(LEFT(A" & CurrRow & ",SEARCH(""-"",A" & CurrRow & ")-2)&Vlookup(B" & CurrRow & ",FY08StdBillingRoles!A:B,2,False),FY08Rates!A:A&FY08Rates!B:B,0),3)),0,INDEX(FY08Rates!A:F,MATCH(LEFT(A" & CurrRow & ",SEARCH(""-"",A" & CurrRow & ")-2)&Vlookup(B" & CurrRow & ",FY08StdBillingRoles!A:B,2,False),FY08Rates!A:A&FY08Rates!B:B,0),3))"
I am currently using the following formula:
=VLOOKUP($A$3, Sheet1!A:B, 2, 0)
=VLOOKUP($A$3, Sheet1!C:D, 2, 0)
=VLOOKUP($A$3, Sheet1!E:F, 2, 0)
The problem is I am trying to get the table Array portion (A:B , C:D , E:F etc.) to auto fill when I drag it across and it will but not correctly. How to autofill with the pattern that I need?
Currently it would auto fill with D:E , F:G, H:I G:H I:J
I'm looking for a formula to return the correct value without using any help-column and it should be typed in no more than one cell.
View 10 Replies View RelatedI have a workbook that if I use just the array formula for the totals it works fine and if I use data validation and vlookup and the array formula for the totals it is giving me a #Value! instead. I have tried a couple of things and did find that as long as I do not use the vlookup in the one column (column d) the array formula at the bottom works but as soon as I add the vlookup to column D I got the error.
I want to use the vlookup to get the values for items on a different page - along with the data validation and then use the array formula to get a total for multiple items in the above columns. I have attached a workbook.
I have this formula: =VLOOKUP(E24,OFFSET(Data!E$23,0,0,MATCH(TRUE,Data!E$23:INDEX(Data!E:E,MATCH(9.99999999999999E+307,Data!E:E))="",0)-1,14),14,0) in column e and looking up from a sheet called Data!. This formula looks up off of column e into the data worksheet from the point where I insert a blank row at a chosen point in the data. The problem is that this formula needs to calculate in excel where is shows in the bottom left of the screen...calculating 5%...50% etc. and I have to wait. Does anyone know how to rewrite this formula so it does not have to re-calculate after each move? This formula above requires a CTRL+****+ENTER.
What the formula above does is simply looks up into the other worksheet from column e and looks up only into the data where I insert a blank row. So it creates a lookup range at the point where the blank row is inserted.
I'm working on a project in Excel (for a restauraunt) and I basically need to make a formula to work out what an item is, using it's ID number and referencing the certain menu that it is in.
as you can see the table array is defined in cell E3, but i still get a #N/A result, and when I replace the "E3" in the formula with "Deserts" it produces a result.
I am using a VLOOKUP formula, but when I drag it down it doesn't keep the same array selection. Is there a way so that I can drag it and it relates to the cell to the left, but the array selected stays the same. I don't really want to type the same thig out for every cell as there are 6000. I am using: =VLOOKUP(D2,Working!A2:C23,2,FALSE) and want D2 to change accordingly but for working!A2:C23 to stay the same.
View 2 Replies View RelatedI am looking to be able to alter my table_array section in VLOOKUP to adjust in date.
exampe: =vlookup(A4,'[Daily report - August 25.x;sx]Facilities'!A4:AY100,84,FALSE)
and I want to be able to change the August 25 -> August 26 repeating so that as I drop the next date in it will update to the correct tab.
I have the dates above so if I could somehow just the date to another cell instead that would work as well. I just do not know how.
Essentially I need to grab data from a separate workbook everyday and compile it to one master list.
I would like to have vlookup formua. And I would like the sheet for the table array section be linked to a cell value. So in my workbook this is my vlookup formula:
=VLOOKUP(B2,sheet1!B2:C8,2,FALSE)
I would like to to be something like =VLOOKUP(B2,(=b3)!B2:C8,2,FALSE). This way I can change the value in B3 and the vlookup formula will look for values in a different sheet as opposed to the one I originally designated in the formula.
Here is my workbook: Book1.xlsx
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries
Mar
Apr
May
Jun
Loans to banks
Mar
Apr
May
Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
Basically have a spreadsheet to track an athletic competition going of for the purposes of a fantasy game (like fantasy football). The scores from each event are being copied and pasted into a data pages and then other pages pull from that for calculations. I'm using rankings (rank.eq equation) on a calculation tab, and then using those rankings on a leader-board tab find placement via the VLookup function. The issue I'm running into is ties, when two people are ranked the same. I've been playing with this:
=IF(ISERR(VLOOKUP($J17,Men!$A$1:$G$43,7,FALSE)),VLOOKUP($J17,Men!$A$1:$G$43,7,FALSE),
VLOOKUP($J16,INDIRECT("Men!A" & LOOKUP(J16,Men!A1:A43)+1):$G$43,7,FALSE))
Where it checks for an error in the Vlookup, if its not an error then it does the VLookup, if it is then if looks up the previous ranking and the VLookup array uses Lookup to find the position of the last rank, increments it by one and starts the new Vlookup there.
I have a spreadsheet with 51 worksheets - a "Master" worksheet and 50 datasheets (labelled 1-50). Within the "Master" worksheet the first column has numerical values ranging from 1-50.
One of the columns in the "Master" worksheet is a VLOOKUP that is trying to pull data, of which the table array is dependent upon the value in the first column. For example:
If cell A2 has the number 1 the VLOOKUP would be:
=VLOOKUP(E2,'1'!$A:$E,3,0)
If cell A2 had the number 2 the VLOOKUP would be:
=VLOOKUP(E2,'2'!$A:$E,3,0)
If cell A2 had the number 3 the VLOOKUP would be:
=VLOOKUP(E2,'3'!$A:$E,3,0)
etc.
Tried nesting an INDIRECT function with the VLOOKUP but it didn't work.
In sheet1 I have name(column A) and value(column B)
In sheet2 I have name (column C) and key(column D)
In sheet 3 I have results
Example ( It is just a total nonsense example, the real data is net inflow of some funds that are unique)
Sheet1
House 1000
Car 1500
pet 2000
Sheet 2
house1
car1
pet2
So in the sheet 3 I want to put a formula that is capable to sum all values of the sheet2 if the name has a key of 1in the sheet2, the key columns has values of 1 or 2
I think in SQL will be something with join and group by with having clause.
The result will be 2500 in the sheet 3.
What I tried: My attempt is to do something like this code ( using array functions).
I need to be able to do a look up in 9 different table arrays using 9 different ranges.
I have attached a worksheet to help explain. My problem is that I can't have 9 IF statements in one formula.
I am not sure how to make this smaller or work.
I am making a report with product usages for a given week. There is a file for each week.
At the moment I am using vlookup function and manualy change path to source file every week.
=VLOOKUP($A$1,'A:FilingDataMatrix 2012Production Matrix[Production Matrix 2012-Week15.xlsm]Mon - Ingredients'!$E:$F,2,FALSE)
Now I would like to avoid the part with manual changing. Instead I would like to have an ability to take the file path from separate cell.
I am trying to build a udf to replicate a vlookup where the table array is in another file.
The scenario is that very often I use store numbers and want to add the associated name quickly without having to open up the reference file and use a vlookup. So I am looking for something like =storename(number)
I'm trying to lookup XYZ plc in an array where the company names in col A are like XYZ plc (UK, London), ABC plc (Boston US) and I want the lookup to return a date in column 3. I've tried VLOOKUP(B2, LEN(LPR), 3, FALSE) where B2 is the cell holding XYZ plc and LPR is my array and it's not working.
View 2 Replies View RelatedI have one sheet that contains data about products, the product number, the class it belongs to, and many other bits. The data is sorted by product number.
In a second sheet I have a list of classes in column G, I'd like to return a list of product numbers in columns H to wherever is needed.
For example there might be two products in class one, class one is in G1, with the first product number in H1 and the second in H2.
I have created a workbook consisting of several blocks of similar data. To make updating the data easy I have arranged each block on a seperate sheet. IS there any way to retrieve data from this 3D array using LOOKUP functions based on data from drop down lists? I have tried labelling each block of data on it's own sheet and trying to retrieve the label from a list using VLOOKUP but each time the label is retrieved as a text string and gives an error message when used in another VLOOKUP. I.e. =VLOOKUP(A10,(VLOOKUP(A13,'0'!C21:D31,2,FALSE)),3+(IF(B10="No",3,0)))
The interior VLOOKUP is retrieving for example "a" instead of a, when the outer VLOOKUP encounters this it returns an error. Is there any way of fixing this, is it a shortcoming of Excel, is it me or will I ahve to go back to creating one big data array on a single sheet?
=VLOOKUP($B$54,'R:OperationsPerformance ReportingSales ReportsFTW North - INT2006Daily7 July7-02-2006[Sales TL Base Report.xls]MAXimize Summary'!$A:$BA,E$3,FALSE)
I would like to make date in the table array (07 July7-02-2006) a variable, but keep getting an #NA with my limited experience. From what I can gather the single quotes are causing the problem?
I am working with a friend on their spreadhseet which uses several vlookups in order to pull information cells in one worksheet to another, and also to pull object types from a list with values saved as an array. However, one item in the array consistently does not appear.
I noticed that his array has 4 columns, unsorted, where I would have used 2 (one with the object type, and the second with the value corresponding to that object type) and then sorted them.
The error he gets is "A value is not available to the formula or function", even though the value is in the array.
I have already eliminated formatting, spelling errors, bad formula (it works for the other types), and all I can come back to is the array.
The file is too large to attach, so I am attaching some description of the formulas and the structure of the array.
I just wanted to concatenate a few cells using an array formula like this:
{=SUM(IF(B2:J2="";0;B2:J2))}
Well, this does not work. I have no idea why it fails. Any solution to this without scripting?
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it
in writing so that i accurately describe my problem. attached is my example
I need to make a vlookup which returns values for many 1000 material numbers. The values is located several other files. My problem is that i dont want to update all vlookups every time the other files (with my values) are getting updated.
e.g.
i want to have en cell A1: FileNameVersion1 and when someone updates the file the only thing i have to do is to change the name in cell A1 to FileNameVersion2.
find a formula that would act as a vlookup but would look up and return a value even if it is not on the first position within the array. I have an SAP export that has on Column A the batch number and on column B the item description. The thing is that within the multiple batch number arrays it allocates on column B the item description only for one row and randomly (sometimes first, last or in the middle).
View 6 Replies View Related