I have the following issue I have a fixed value in column N this is vlooked up into a cell in the same row after a specific cell value (category):
Toilet
Category
X
Brush
Category
X
Handle
Category
X
Door
Category
X
Computer
Category
X
The table above shows that the initial column is fixed i.e Toilet, Brush etc however the X's are dynamic but they will always be placed after the word Category. I think a VBA solution is needed but I can't figure out how to do it.
sample.xlsmI am trying to create a sheet with dynamic lookup based on selections.
So if a user selects planning or costing and then the state then click on search then it cell B13 it should lookup from data sheet and give full state name and in cell C13 give the document name and in D13 give the print rule.
If in the data sheet the document type says planning/costing and there is no corresponding state to that document then it should be incliuded in all searches.
When I click clear then it resets the search. So if i select Planning and state as AL then the display should be Alabama ABC DEF
A12 AA1 (aligned to previous row) C12 AA3 (aligned to previous row) E12 AA5 (aligned to previous row)
Also is it a better option to do planning and costing as a radio button or drop down list. Is there a way in the state selections to show the drop down list arrow at all times. Currently when the cell is not selected it disappears.
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows: =VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0) but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following: =VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE) The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I need to calculate the percentage based on self populating score. however I want excel/formula to ignore any cells which has "NA" in it so that it calculates the percentage based only on the cells having Numbers.
Now these Cells which contain Numbers might or might not contain numbers based on the "IF" function which decides wether the cell will have numbers or will remain "blank" or have "NA". To understand better please have a look at the enclosed sample (that would explain my need better)
I am looking to write a formula that can concatenate cell A$1$ (absolute) & B1: B245 (dynamic)and then A$2$- B1:B245 and then so on.
So for example, I need to concatenate cell A$1$ & B1, and then A$1$ & B2, all the way up until B245, and then I need to restart the sequence with A2 and B1.
Formula to preform this concatenation, or will this need to be done with VBA?
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
I need to name a dynamic range of cells. The only constant is the column - H, and the heading "MRC".
MRC column in a table represents an array formula. Unknown is the row where it is going to show up and the number of rows that this array formula will take. I need to name this range (active cells based on the array formula) but do not know what row does it start with and how many rows will it take.
It is not the last table in column H either but there are 2 empty rows before the next table.
Trying something like that...
========================= Set aCell = Range("H:H").Find(What:="MRC", LookIn:=xlValues, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False) If Not aCell Is Nothing Then
The purpose of the attached spreadsheet is to record whether or not my company has stock of each item, on every day. It currently works by doing a VLOOKUP in each cell if the date matches todays date which is generated by the formula on the TOTALS tab, cell I2. The current days stock levels are refreshed by a database query on the DATA tab and then totaled up on the TOTALS tab. The VLOOKUP formula returns the stock level and if we are out of stock then we are manually formatting the relevant cell on the REPORT tab red.
It has been suggested to me that there might be a way to do this via conditional formatting although I cannot work out how as once the current day changes to tomorrow then the formula in the previous cell no longer returns a value and the conditional formatting would return teh cell colour to white. Is it possible to automate this process using VBA so that whenever the sheet is opened (daily) then it will copy and paste special the relevant stock level for that day against the correct product?
I want to create dependent lists using data validation. The lists need to be created from ranges that will be growing as users add more data. I think the best way to create the list is a VLOOKUP. However, I am not sure how to use the VLOOKUP when the range is changing.
I have attached an example. I have a list on sheet "Vlookup" called "FRUIT" with "apple", "orange", "banana". Then to make the depedent lists I have created three other lists called: "APPLE", "ORANGE", "BANANA". I want to pull the COST from sheet "VALUES" into the lists "APPLE", "ORANGE", "BANANA". Users will be adding costs next to the FRUIT they purchase.
I'm trying to find a way to perform Vlookups against a dynamic range of data, where the number of rows/values in Col B is always subject to change.
The way that the workbook is structured is as follows:
Sheet1: Except for Cols A & B, this is a blank sheet. This is the sheet in which the vlookup values will need to fall into based on the number found in its' Column B
Sheet2: The sheet that contains the data that will be passed into Sheet1 via vlookup, and all of its Columns contain data.
So, basically, Sheet1 is a shell that needs to be filled with data copied over from Sheet2 based on vlookups against Col B.
The vlookups will need to be shifted back 1 column.
And examples of how the Vlookups need to work is:The value in Sheet2 [Col E], needs to get passed into Sheet1 [Col D]Along those lines:
The value in Sheet2 [Col F], needs to get passed into Sheet1 [Col E]
The value in Sheet2 [Col G], needs to get passed into Sheet1 [Col F]so on and so forth
So basically, all of the values passed into Sheet1 from Sheet2 need to be shifted back by 1 column until we reach the last Col (Col M in this file).
Where
The value in Sheet2 [Col M], needs to get passed into Sheet1 [Col L]
The number of columns will remain fixed, but again the number rows will vary week to week in both of the two sheets, so I would need to have a way of creating a Vlookup through VBA that accounts for the dynamic range in Col B.
The workbook I'm working on has several sheets: Totals, Monday, Tuesday, etc set into a SheetArray.
The problem is that I'm trying to perform a VLOOKUP on data in worksheet "Monday" against column A in worksheet "Totals". However, the size of column A will change as the codes iterates through the days. Therefore, I need the range of column A in the Totals worksheet to be dynamic.
Code:
'Find any new projects in the daily data that are not in the Totals. DayProjCount = Range(Sheets(SheetArray(A)).Range("AA2"), Sheets(SheetArray(A)).Range("AA2").End(xlDown)).Cells.Count ProjCell = 2 With Worksheets("Totals")
[Code].....
During this process, the code should only find 1 error in ValidProject. But, each are throwing errors. I think it's because the VLOOKUP isn't searching through the correct range, but I don't know how to check it.
I am trying to create a vlookup to get a count of trouble tickets techs completed daily within a table I created, I am using a table since its dynamic. For example I need to see how many tickets Joe completed in a day. See below...
Tech Ticket# Comments Status Joe 1234 Replaced HD Closed John 3212 Replace Motherboard Closed Joe 5678 Installed OS Closed
Above is just an example (my table has 40 columns). I need to vlookup joe and get the count of the closed tickets.
I have a workbook with 100 worksheets. Each worksheet is setup the same way with dates down column A, and data in column B. In another sheet, I need to run a vlookup on the dates and data, but I need it to adjust for whatever spreadsheet name I give it. Is there any way to have the vlookup table array change as I change the worksheet it should reference?
I have this code which looks information in a table. The problem is that the table is getting every time bigger.
Here the code:
VB:
With Worksheets("Sheet10").Cells(9, 3).Resize(, LastColumnf - 2) .Formula = "=IFERROR(CONCATENATE(VLOOKUP(Sheet10!C2,Sheet12!$A$10:$C$550,3,FALSE),""."", VLOOKUP(Sheet10!C2,Sheet12!$A$10:$C$550,2,FALSE)),"""")" .Value = .Value End With
How can I write $A$10:LastNewRow... Another problem rises here, LastNewRow might end up being the oldLastNewRow, i think. But maybe since it is getting bigger, there is no problem, I don't know.
Instead of having a static reference like $C$550 I would like to have a dynamic one.
I'm looking up a value from another workbook. Simple enough in itself, but heres the thing.
I'd like to write a dynamic vlookup that checks the value of another cell to find the table array for it to look up from.
Basically I have a table of data, the column headers are dates. I have a report that is run daily that I need to look up from. Rather than implicitly referencing each sheet I'd like to tell the vlookup to check the date in the column header and use that for the sheet. The range inside of the sheets is always the same.
I'm trying to create a dynamic Named Range using VLOOKUP in place of a sheet name. (Using Excel 2003 & Win XP Pro SP2).
To illustrate:-
Employees.xls contains employee's details on separate sheets for each department, e.g. Production, Admin, Sales, Personnel, etc. Each sheet is 12 cols. and 1 header row. Sheet 1 of this book contains a 2-column Master List of all employees and their departments. MyBook.xls has an employee's name in A1.
I can get his department by using =VLOOKUP(A1,MasterList,2,FALSE) and what I want to do is incorporate that into the following in place of 'Admin' so that the range will refer to the correct department for whoever's name is in A1.
how to get the table_array element of vlookup to either obtain details from a worksheet cell, or to enclose a variable (specifically part of the filepath) within the table_array formula. I have a template that gets saved and used in various directories, and I want Vlookup to to dynamically lookup information from a specific file that is also contained within the directory, without having to find and replace the directory name in the vlookup formulas.
I will receive one master file which contains the table and it's values and I have another working sheet where I will update the require details. Every time I will copy the entire master data into working file in order to extract the values by using vlookup function. note that the master file has different names each time. So, that if I use vlookup by taking master data path but not getting the results.
I am looking one macro code to select file (master data) and paste the values based on vlooup references in workings sheets. Note this master data file name may change but reference range always same.
I'm trying to pull information in one spreadsheet (SS1) from another spreadsheet (SS2). I've found that the following works, except when SS2 is closed. Is there a way to do the following formula so that it will work even if SS2 is closed?
I am trying to merge data from two worksheets onto a 3rd for a mail merge. The COLLECTIONS sheet contains the acct #, name and amount owed. The ADDRESSES sheet contains the acct #, name and all of the address information. The 3rd sheet is the MERGE sheet that I'm using as the reference point for my word document and the mail merge. Upon reflection the MERGE sheet is probably not necessary, but made sense to have it when I started out.
Never the less... On the ADDRESSES sheet I am trying to name a dynamic range "AddressList" (I'm trying to go dynamic because the list of addresses will change from month to month). I am using the following formula in the refers to field when I name the range:
I think this is what is giving me my problem, because the named range does not show up in the list when I try to go to the named range.
Just in case that is not the problem, the #Ref is showing up when on the MERGE sheet I type a vlookup formula referencing the acct # on the ADDRESSES sheet. That formula looks like this:
=VLOOKUP(A4,AddressList,3,0)
which seems simple enough. Before trying to make the named range dynamic the formula worked fine, which is why I'm thinking the named range is what's giving me the problems.
I have an worksheet that I import a csv into, each day a new csv is added to the bottom of the previous csv data. I have some code that extracts the date and month # from the cell and places them in helper columns. The code find the last used cell in the helper column and the imported data column to find the first and last row of the new day.
This part works fine. However, I assigned a variable name to the first and last variables and would like to uses these row number to define a range in order to use the range for a vlookup or find operation. This is where I get stuck. I want to use column x and row (variable from first bit of code) to column y and row (variable from first bit of code). Then use a vlookup/find whatever works to find the text I need and get the data. Tips on looping the code would be welcome as well.
I have searched for answers to the problem, on the board and web, but have not found a solution that works for me. (at least that I could get to work!!)
Below is the code as I have it
Public Sub Enter_Date()
Dim DateA As Date Dim DateB As Date Dim Cnt As Integer Dim End_of, Beg_of As Integer Dim Count As Integer Dim NumtoFill As Integer
I have a vlookup function which takes the data from a table in a closed file. A folder where the file would be located will change based on the value in the cell reference.
I used below formula which works, but every time when i drag or try to edit and enter, the path of the file path brokes and i need to reselect the path where the file is located. Is there a way where i can stop this?
I am making a dynamic graph with use of listboxes. Please see attached example.
In the example doc is a graph which is now static. Based on the rows I selected in the table, for store 1 and for february. What I'd like is that a user can select a store and a month in 2 listboxes and that the graph is dynamically created based on dynamic selection in the table. I think I need to use the OFFSET function and some defined names but I'm not sure how.
I have data in a spreadsheet similar to the below.
[Code] ....
What I need to do is created a named dynamic range based on the current month which will contain all rows/columns within that range. Ideally I need it to create the range for the current month so I can then use this as the data source for a pivot table.
I believe it is something to do with index and match functions?
I would like to create a dynamic range based on a cell value. However, the cell reference may vary because the numbers of entries in the workbook can vary.
In addition to that, after the first range (eg. A1:A10), I would like to create a second range after the first (eg. A11:A20).
I am trying to make a chart based on the following values (for example) The X axis values are week numbers, the chart X axis must stop at Week 4, the data range still contains all these cells, but the chart will only show cells with values, If i'll put a value in Week 5, the chart will auto-expand itself to include week 5 too.
Basically I have a worksheet with the following: C4 -a cell where a user can input a number the rest of the worksheet is data in a normal fashion.
I am seeking a macro that will select & copy cell G6 through whatever the value of C4 is. This selection would be a variable range with the offset being whatever is typed into C4.
Ex: If the value of C4 is 5 then I would like G6:G11 to be selected and copied.
I am aware of offset, but don't know how to implement it in such a dynamic way.
I have VBA code with array formula that looks up some values from series of spreadsheets. Which spreadsheet to use depends on the values in another column.
How do I make the formula the same for the whole range as it will substitute the necessary path into itself?
here is an example:
here is a code for VBA:
Range("I2").Select Selection.FormulaArray = _ "=INDEX('1_Repl'!$C$2:$C$8,MATCH(1,IF('1_Repl'!$A$2:$A$8=H4,IF('1_Repl'!$C$2:$C$80,1)),0))" Selection.AutoFill Destination:=Range("I2:I535"), Type:=xlFillDefault ******** ******************** ************************************************************************>Microsoft Excel - TEST_LOOKUP.xls___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutI4I5I6I7I8I9=ABCDEFGHIJK11st Spreadsheet 2nd Spreadsheet 2 3Number123 CodeNumberData2 41230.200.2 11230.22Code=1, so 1_Repl.xls 52340.10.10 12340.1 6345000 2345#N/Ahas to refer to 2_Repl.xls 712300.220 3456#N/A 8234000.15 3567#N/Apath has to be dynamic 91230.240.240.24 3678#N/AValue of G2+ "_Repl.xls" 103450.1300 11 1_Repl [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
