I have a pivot table in Office 2007. I want to filter the last column such that the values in the data area are greater than a certain number. But all those filter options are grayed out. The only option available (and working) is to select the top n entries. So clearly a reference into the data field to filter a column works, but why not by value?
View 9 RepliesI have this problem which I have simplified below:
Sheet 2 contains a Pivot table. One of the report filters is "Month-Year" (Eg, May-14 - in date format 'mmm-yy') which is selected by a Slicer on sheet 1.
Cell D1 on Sheet 2 contains a formula which calculated/displays the mmm-yy of the same period last year (eg May-13).
I want a code so that when I select the 'Month-Year' Slicer to filter the pivot table on Sheet 1 (eg to May-14), another Pivot on Sheet 3 is filtered with the previous year mmm-yy (May-13).
I want to filter a pivot using VBA by 'Contains' like it is possible to filter data in a spreadaheet. Is it possible?
Im currently using the coding :
ActiveSheet.PivotTables("PivotTable2").PivotFields("Producing Office"). _
CurrentPage = "Choice"
I want to replace my choice with a contains "choices".
I have a "File 1" that contains a macro that opens another file (call it "File 2") and performs various steps. One of these steps requires it to run a macro that exists in File 2. To do this, in File 1, I have the following line in my code which executes a macro called Refresh_PivotReport:
Application.Run "'File 2.xlsm'!Refresh_PivotReport"
Unfortunately, when I get to that point in my code & the macro in File 2 is attempting to execute, I get a Run-Time 1004 error. Here is the code for "Refresh_PivotReport" in File 2:
Sheets("Report").Select
ActiveSheet.PivotTables("PivotTable2").PivotFields("FilterA").ClearAllFilters
ActiveSheet.PivotTables("PivotTable2").PivotFields("FilterA").CurrentPage= "N"
ActiveSheet.PivotTables("PivotTable2").PivotCache.Refresh
If I run this code directly within File 2, it works fine. I only get the error when the macro is called from within the File 1 macro. Can you tell me what I've done wrong?
I am trying to filter onto Date field in my pivot table with a start date and an end date with VBA (please find code below).
However, my code single makes all pivot items invisible.
Bascially, in cell B1, I have my start date i.e. 05/04/2013 and end date in cell C1. I would like to filter out only items within these dates.
VB:
Sub PTFilterTest()
Dim ptPvt As PivotTable
Dim ptFld As PivotField
Dim i As Long
Dim dtBegin As Date
Dim dtEnd As Date
[Code] .....
I'm trying to have a command button clear all filters on a pivot table (PivotTable1) and apply a new filter equal to a cell value (C4). If the cell value can't be found I want the filter to equal "No Meeting". I'm trying to recycle the code from another workbook I built a long time ago, I just can't get it to convert to this application.
Code:
Dim County As IntegerDim pvtTable As PivotTable
Dim pvtField As PivotField
Dim pvtItem As PivotItem
[Code]....
I have a list of names and a count column, So it counts how many times the names have appeared from my raw data. Simple.
Using excel 2003 what i would like to do is filter the pivot table so it only shows people with a >1 count.
Now in excel 2007 this is really easy and i can just apply a >1 filter. I can't work out what to do in excel 2003.
I have a huge excel file. This file contains Projects, Project Manager, departments and sales for different quarters. Each department has sales and the quarter the sale was done. Now I want to create a pivot table where I can see the sales for each quarter for each project or each project manager. Attached file may elaborate the problem. ShaA1.xlsx
View 9 Replies View RelatedAny way to select the last option in a filter list for a pivot using VBA? I already have code to elminate certain critera that I don't want but there is a date column which will change and I will always want to select the last date in the list. Is there a way that I can get VBA to simply look in the filter options and select the last one?
View 9 Replies View RelatedI've created a PivotTable using VBA that contains hundreds of PivotItems, which would look bad when a PivotChart is made.
I'd like to set the PivotTable to make visible only the first X items (let's say 10). How would I do this in VBA?The macro recorder gives me the name of the PivotItem, but this varies so I'd like to use an index:
VB:
ActiveSheet.PivotTables("PivotTable4").PivotFields("UWI").PivotItems("Item1").Visible = False
ActiveSheet.PivotTables("PivotTable4").PivotFields("UWI").PivotItems("Item2").Visible = False
Once i identify the PivotField, how can i filter it to be > than Date?
View 2 Replies View RelatedI am trying to filter pivot chart by strategy and it does not update the combined Sum of Cumulative chart when I uncheck / filter strategy.
I have attached the example : Strategy_Combined_Analysis_Wkly_All_Example.xls
i have a pivot table report filter that i cannot sort a-z. i've tried sorting the source data and also right clicking on the first value then choosing display a-z - neither work.
View 5 Replies View RelatedI need to change a row label filter on a pivot table based on the value in a cell but don't know how to do this with VBA.
View 6 Replies View RelatedI want my report title is more dynamic which is based on the pivot table's <Status Date> filter. It mean if I select the <Status Date> filter option as 6-23-2014. Then the report title will automatic update as "Statistic Report 6-23-2014" instead of I have to change the date each time I run the report.
View 1 Replies View RelatedI am trying to loop through each pivot item in the pivot table filter called 'COMPANY_NAME'
This is the code I have so far but get an error on line 'PvItemL.Visible = False'
[Code]......
I have this code for setting a filter on my pivot table to show all data occuring after a certain date. Is there a way to add code so that instead of it saying "Value1:="31/10/2011"" that it would work out the last day of the current month and use that.
Something like:
Code:
=EOMONTH(TODAY(),0)
Code:
ActiveSheet.PivotTables("PivotTable1").PivotFields("Date_CDD").PivotFilters. _
Add Type:=xlAfter, Value1:="31/10/2011"
Sheets("SRS Pivot").Select
I need to filter a pivot table based on a field property. Sort of strange, but the database I get the PivotTable data from returns the Week in the accounting month. as the field name. It has several properties which I have figured out how to expose including the period end date. Now I need to figure out how to filter the PT based on that.
The following shows the property:
Code:
ActiveSheet.PivotTables("PivotTable4").CubeFields("[Time]").AddMemberPropertyField Property:="[Time].[Week in Month].[End Date]
Now if I just knew how to filter with that value I could move on the the next issue ....
I have a summary worksheet, which has a drop down cell. on another tab I have a few pivot tables, is there a way I could get one of the pivot tables to auto filter based on the selection in the summary worksheet?
View 1 Replies View RelatedI have a pivot table, where the rows are product names, and there are two column fields: quantity and money.
I want to filter the pivot table to only show data where the amount of money equals zero. This is easily done with a Value Filter.
I also want to filter the pivot table to only show data as applicable to certain product names. This is easily done with Label Filter.
However, I cannot get both of these filters to stick at the same time. When I add one, the other is removed.
I have a recorded a macro to create a Pivot table from my data. In this Pivot I have to make the report filter field to filter the dates from the current month only. Is there a way that I can instruct my macro that in that filter it automatically filter the data from the current month range.
View 1 Replies View RelatedI am trying to run a macro on a few items(24) in a large pivot table(6000). How can I run through a list, one at a time and then run another macro?
Here is what I have:
Sheets("Random Demand").Select
Range("O1").Select
ActiveCell.FormulaR1C1 = "D12549.256"
Sheets("Item Lookup").Select
ActiveSheet.PivotTables("PivotTable1").PivotFields("ITEM_NUMBER").CurrentPage _
= "D12549.256"
Run other code here, then loop back and choose the next item on the list
The problem is the ActiveCell.FormulaR1C1 = "D12549.256", the range if cells with the items I need to use is Range("O1:O24"), that is what I want to use since the data will change and needs to be dynamic.
How to use an array of multiple values in code I want to use the array of values "jan" "feb" "mar" in the code instead of "jan"
Code:
Private Sub Worksheet_Activate()
ActiveSheet.PivotTables("Pivottable1").PivotCache.Refresh
ActiveSheet.PivotTables("Pivottable1").PivotFields("cat").ClearAllFilters
ActiveSheet.PivotTables("Pivottable1").PivotFields("cat").PivotFilters.Add _
Type:=xlCaptionDoesNotEqual, Value1:="jan"
End Sub
I now have code that automatically refreshes all pivots and send an email with a brief body and summary table. What I wanted was to have VBA update the pivot table to the latest date before sending out the summary.
The table below is the mentioned pivot above where normally, I would update the Date to the latest date where a value was updated. So where PivotTable11, take Max of Date (only one row)
Date Amount #Volume
04/07/2013 £5,500.001
I'm running reports in one workbook on different types of spend for 12 business units using 1 worksheet containing the raw data, and 6 other sheets with pivot tables showing different levels of detail.
I've used simple VBA to prepare to standardise the raw data and refresh all the pivot tables with no problem
I need to filter the data to show spend for specific business units. I'd like to do this using a listbox showing the units where I can select the unit(s) to report on, which in turn will only make the units selected visible on each table in the workbookwith no other intervention.
There is another thread on here (showthread.php?t=55041) that shows how to use the list box to control 1 pivot table on one sheet but I can't find anything which shows me how extend this to cover multiple tables over multiple sheets.
I have two fields where users enter a security identifier (cell P1) and the declaration date (cell P2) and i'd like to be able to pull all the records from the master table (A1:K10) where the security id matches (column H) and the request date (column C) is <= the declaration date (i've attached a sample file for your reference). I tried using a pivot table but it doesn't let me filter for "less than or equal to" values for the request date.
View 2 Replies View RelatedI have a problem that I'm sure requires the most elementary fix. I have exhausted google on this. All I need is a drop down list for each value field. See picture attached.
View 1 Replies View RelatedI have a macro to refresh all pivottables in my workbook. Each pivottable source from the same data pool - in addition I have a filter on each pivottable. Is there a way to fix this filter, such that once the source data is updated, the filter doesn't change? Or to only refresh the "data" in the pivottable?
My code for refreshing all pivottables is given below.
Dim pvt As PivotTable
Dim sh As Worksheet
Application.Calculation = xlManual
For Each sh In Worksheets
For Each pvt In sh.PivotTables
pvt.RefreshTable
Next pvt
Next sh
Calculate
Application.Calculation = xlAutomatic
I have a list of customer satisfaction scores that are pulled in from a sharepoint list. The list is then used to create a pivot chart that is used in a web part on a dashboard in sharepoint. The chart is supposed to show average customer satisfaction scores per category per month.
The problem I have is that I can't filter the categories using a slicer, I can only filter the categories' values (i.e. the scores). I can filter by date though.
When I try to filter the various score categories/series (Support, Change Management etc) I only get the option to filter their values i.e. 1,2,3,4,5.
I want to be able to use a slicer or similar to be able to display either all of the series or just selected ones.pivottable.JPGpivotchart.JPG
I use a spreadsheet to extract data from an access database. When the data is extracted it has about 10k line items and one of the columns displays the date. I formatted the cell to simply display the month (Jan, Feb, Mar, etc). When I create a PivotTable with the 10K line items each line displays the month. When I use the date as a filter it displays every single lines month in the filter box. Is there any way I can combine the months in the filter box so that each month would only display once collectively instead of for each line item?
PT.jpg