Worksheet Events: Use A Worksheet Event To Change The Background Of The Current Month Two Columns In The Range To Yellow Color
Jun 12, 2007
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
I am trying to use the worksheet calculate event to automatically change the color of a cell only when that particular cell changes. In E2 of the worksheet is a formula use to determine rating based on the result of 2 other cells. The rating is classified as follows
Low Moderate High Maximum
I would like to generate a different set of color to the cell and fonts for each of the rating. For example,
"Cyan" to the cell E1 and E2 with Black font if the result is "Low" "Plum" to the cell E1 and E2 with "Black font if the result is "Moderate" "Blue" to the cell E1 and E2 with "White" font if the result is "High" and "Red" to the cell E1 and E2 with "White" font if the result is "Maximum"
I have this code working fine. It applies conditional formating to two rows ((K3:K65) and (J3:J65)) and checks when a value changes in row B to reaplpy the formatting. I'd like to had add more columns to it. It would have apply the same conditonal formatting on rows ((O3:O65) and (P3:P65)) but when a value changes in row (N3:N65)
So basically, I want to keep the first working part of the code and have it to check at more rows with a different reference for the conditionnal formatting.
Private Sub Worksheet_Change(ByVal Target As Range) Dim rng As Range Dim rngJ As Range If Target.Count > 1 Then Exit Sub Set rng = Union(Range("B3:B65"), Range("J3:J65")) If Intersect(Target, rng) Is Nothing Then Exit Sub Set rngJ = Range("K" & Target.Row) Select Case rngJ.Value Case "" rngJ.Interior.ColorIndex = xlNone rngJ.Offset(0, -1).Interior.ColorIndex = xlNone Case Is >= 20.............................
I am aware that I can use single changing events in worksheet change events. For instance, if column 1, or A is changed, do something. This is only a single If statement, i.e. either the condition is true, or not. What I am not sure is if I can use two changing events, i.e. two conditions. For e.g. I would like if Column A value is X and Column B is "Active", action it, but only if two conditions are true.
For.e,g. The below syntax does not work. If it is only column A, it does work, but I want both A and B to be true, then copy and paste the target does not anything.
VB: If Target.Column = 1 Then If Target.Column = 2 Then If Not Intersect(Target, Range("A2:A" & Rows.Count)) Is Nothing Then If Not Intersect(Target, Range("B2:B" & Rows.Count)) Is Nothing Then If Target.Value = "X" And Target.Value = "Active" Then
Hide Columns based on Date value in cell (Worksheet Change event)Looking for a worksheet_change event macro that will automatically hide columns based on a value in cell S3. S3 is a data validation pick list of months based on the 1st day of each (e.g. 1/1/2014, 2/1/2014, 3/1/2014, etc.). I have date columns in row 6 from columns T through AQ. These values are 1/1/2014 (T6), 2/1/2104 (U6), 3/1/2014 (V6)....12/1/2015 (AQ6). I would like to hide columns that have a date in row 6 (T6:AQ6) that is LESS THAN (<) the date in S3 after the cell is value is changed.
is it possible to have a userform activated as a result of a Worksheet_Change event on more than 2 cells. Currently I have the code below which will activate userforms if either a cell in Column G or a cell in Column T is changed.
Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Intersect(Target, Range("G:G", "T:T")) Is Nothing Then Exit Sub If Intersect(Target, Range("G:G", "T:T")) = "" Then Exit Sub If Not Intersect(Target, Range("G:G")) Is Nothing Then GlngRow = Target.Row Call Module3.ShowList1 End If If Not Intersect(Target, Range("T:T")) Is Nothing Then GlngRow = Target.Row Call Module3.showlist4 End If End Sub
What i need to do is activate another userform if a cell in Column AC is changed. I tried this code but got an error "Compile Error: Wrong number of arguments or invalid property assignment", which leads me to believe I can't add any more cells to the argument and it highlights the word Range in this line - If Intersect(Target, Range("G:G", "T:T", "AC:AC")) Is Nothing Then Exit Sub..........
looking to only allow a check ("x") in a column for a reconcile - type worksheet. Am I close?
Private Sub Worksheet_Change(ByVal Target As Range) 'Data protection. Only allow "x" in the "cleared" column. If anything else is entered, a message box informs the user 'and the cell contents are cleared. Dim val As Variant Dim msg As String If ActiveCell.Value "x" Then msg = "You can only enter an X in the cleared column." ActiveCell.ClearContents End If End Sub
2 Woksheet Change Events? I have a question similar to one that was posted about 2 worksheet change events which I found out is not possible and so I have to merge the codes together and I don't know how. I'm facing a problem in the advanced filter when I remove the last item to be filtered and takes forever to calculate.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Count > 1 Then Exit Sub If Target.Address = "$F$2" Or _ Target.Address = "$F$3" Or _ Target.Address = "$F$4" Or _ Target.Address = "$F$5" Or _ Target.Address = "$F$6" Or _ Target.Address = "$F$7" Or _ Target.Address = "$F$8" Or _ Target.Address = "$F$9" Then Range("Database").AdvancedFilter _ Action:=xlFilterInPlace, _ CriteriaRange:=Range("Criteria"), Unique:=False Exit Sub End If If Target.Column = 3 Then If Target.Value = "YES" Then........................
i trying to write a macro to add Yellow background color to all the data starting from row 2 in a specfic worksheet but the rows of data is always different it coulsbe from row 2 to 50 then the next day from row 2 to 100 etc.
Code: Sub Macro2() Range("A2").Select Range("A2:O56").Select With Selection.Interior
I realize that it’s not possible to have on one sheet, multiple Worksheet Change Events, so I tried to come up with an alternative method of handling it, but quickly realized that it’s beyond my capabilities at this time.
I would like to set up a worksheet change event on each of a number of identical sheets. Each Change Event will run exactly the same macro. The exception is the “DeptStr” string value that is relevant to the sheet calling the macro .
Each sheet will be a different department.•If the Target in either range has data added, then data will be added to the cell offset one column to it’s right. •If the Target in either range has data cleared, then data will be cleared in the cell offset one column to it’s right.
•There can only be one sheet active at a time. •Only one sheet has data entered at a time. •The two non-contiguous ranges are of equal length. Ex. (C3:C52) and (E3:E52) and are uniquely named in this case,
but they are not a necessary requirement in order to solve this problem if there is a more practical method.
If a cell in some parts of the worksheet (SSMa,SSDi,SSWo,SSDo,SSVr,SSZa,SSZo in the code) are selected the input (4 digits) should be converted into time (00:00). Cells in some other parts (Util,Assis) require 6 digits and should be converted into time (00:00:00).
I had the code working in seperate worksheets but combined (as is shown in code bellow) only part of it works.
Only the input entered into the 4 digit part (SSMa,SSDi,SSWo,SSDo,SSVr,SSZa,SSZo) is converted correctly.
The input in the other parts (Util,Assis) is not converted (so when 800 is entered I do not get 00:08:00 but I get the hour equivalent of 8 days (19200:00:00) and logically the message from the EndMacro "You did not enter a valid time". The cell formats are correct [u]:mm and [u]:mm:ss.
To me it looks like it does not jump to the 6 digits part when need but I can't figure why.
Private Sub Worksheet_Change(ByVal Target As Excel.Range) Dim TimeStr As String
On Error GoTo EndMacro
If Application.Intersect(Target, Range("SSMa,SSDi,SSWo,SSDo,SSVr,SSZa,SSZo,Util,Assis")) Is Nothing Then Exit Sub End If If Target.Cells.Count > 1 Then..........................
I have a previously working _chnage event that I am now trying to nest a similar event in. Neither event works now. What am I doing wrong?
Private Sub Worksheet_Change(ByVal Target As Range) Dim refrange If Target.Address(0, 0) "C55,G107" Then Exit Sub refrange = [MATCH(C55,lst_AgentType,0)] With Sheets("NewInput").Range("d63:r63") If refrange = 1 Then .NumberFormat = "#,##0" ElseIf refrange = 2 Then .NumberFormat = "#,##0.00" Else .NumberFormat = "0.00%" End If End With If Target.Address(0, 0) = "G107" Then refrange = [MATCH(G107,lstCommRev,0)] With Sheets("NewInput").Range("E107") If refrange = 1 Then .NumberFormat = "#,##0.00" Else .NumberFormat = "0.00%" End If End With End If
I have this code that works fine until I password the sheet and the range (b9:d65536) is protected. When I protect the sheet and make a change I get a debug error. What would I need to add/change to handle protected cells on a protected sheet?
VB: AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes" ....
I have font color white in blank cells in column E and I (from row 5 to row 245) so the visitors will not see the text. If any of these cells become yellow (color code is 6), the font color will become black so visitors can see the text alot far better than white. I've tried this code myself after this post but nothing happen
I have a worksheet that includes a cell that gives the current week of the month, in the form of "Week #". I've been using the formula below for several months and have had no issues until this month, and it's driving me crazy.
Given that cell D2 is the beginning of the week (usually Monday, but at the first of the month it may be a different day):
="Week " & ROUNDUP((DAY($D$2)+WEEKDAY(DATE(YEAR($D$2),MONTH($D$2),0)))/7,0) I'm not sure where the logic is going wrong here; it's worked so well up until now. For the week beginning November 2, 2009, the formula above returns "Week 2" rather than "Week 1".
I have a simple spreadsheet. A column for a persons name and 31 columns, one for each day of the month. I want to apply conditional formatting, either fill color or border color, to the date column of the current date when the spreadsheet is opened.
trying to get a worksheet change event to work. Basically the code below calls the time_start procedure when cell J16 downwards is selected.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Row > 15 And Target.Column = 10 Then
Call time_start Else End If
However, I am lost from here on....Let me try and explain what it is I am trying to do. This seems so simple if you know how. Each time that the word "Completed" is entered in to a cell from J16 onwards, the cell two columns to the right on the same row is selected and the current date is entered.
If the word "Completed" is deleted, I want the date on that row to be deleted.
I would also like the choices "Completed" and a blank cell to be given in a validation list via a dropdown if possible to avoid occurances of "Complete" etc and mis-spellings but I understand that a bug may stop me from using this functionality. I am running Excel 2002 on a Windows XP Professional OS.
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
I have the below vba and would like to have the '''event calculated ''' on any event on the worksheet. Right now it only update if updating the val1 thru val6 cells. How can i get the worksheet to update on any event or change on the sheet?
Private Sub Worksheet_Change(ByVal Target As Range) On Error Resume Next fr = Range("a65536").End(xlUp).Row Set Rng = Range("a2" & ":n" & fr) If Intersect(Target, Rng) Is Nothing Then Exit Sub
I have looked at the threads concerning cell change events but cannot find a solution to my situation. I have a worksheet with a cell using a validation list. I wish to exicute a procedure whenever the dropdown list is changed in that one cell. Everything I have seen in the Worksheet event threads is evaluating the contents of a cell and I am attempting to exicute if the cell changes.
I have a spreadsheet with a table of values in range E5 to T158.
A macro populates the table by looking up values on other sheets in the book. If the macro finds a value in the lookup for Row 7 of any column (ie E7,F7...T7) it populates the rest of the column with that value (E7 value gets pasted to E8:E158) THEN it protects the cells it pasted (E8:E158).
If the macro does NOT find a value for row 7, it simply skips it, leaving it blank, and continues to row 8 until it reaches row 158 of each column E to T.
I want to give the user flexibility with these values. So if the user either deletes E7 or changes the value of the contents in E7, I want to unprotect the cells of rows 8 to 158 for that column.
I have created a
Private Sub Worksheet_Change(ByVal Target As Range)
in the private module for that sheet below. I thought it was working but it isn't doing anything when I change or delete the value in Cell E7 for example. Please help!
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed If Target.Cells.count > 1 Then Exit Sub 'Or IsEmpty(Target)
I'm trying to create a worksheet change event macro that will change the colour of the cell when you update the value in that cell.
I have column C with 140 rows and when one of the cells in the column is changed by the user, I need the same cell to highlight in yellow. The highlight would then be removed once the user has acted on the change in the value, and that'll be done in another macro.
I understand I need a worksheet change event macro in the specific sheet and need the following code for yellow:
Code: .Interior.Color = RGB(255,255,0)
, but any further I get stuck as it involves 'target addresses'