Nested Worksheet Change Events

Jul 3, 2009

I have a previously working _chnage event that I am now trying to nest a similar event in. Neither event works now. What am I doing wrong?

Private Sub Worksheet_Change(ByVal Target As Range)
Dim refrange
If Target.Address(0, 0) "C55,G107" Then Exit Sub
refrange = [MATCH(C55,lst_AgentType,0)]
With Sheets("NewInput").Range("d63:r63")
If refrange = 1 Then
.NumberFormat = "#,##0"
ElseIf refrange = 2 Then
.NumberFormat = "#,##0.00"
Else
.NumberFormat = "0.00%"
End If
End With
If Target.Address(0, 0) = "G107" Then
refrange = [MATCH(G107,lstCommRev,0)]
With Sheets("NewInput").Range("E107")
If refrange = 1 Then
.NumberFormat = "#,##0.00"
Else
.NumberFormat = "0.00%"
End If
End With
End If

End Sub

View 9 Replies


ADVERTISEMENT

Could Two Change Events (Conditions) Be Possible With Worksheet Change Events

Dec 13, 2012

I am aware that I can use single changing events in worksheet change events. For instance, if column 1, or A is changed, do something. This is only a single If statement, i.e. either the condition is true, or not. What I am not sure is if I can use two changing events, i.e. two conditions. For e.g. I would like if Column A value is X and Column B is "Active", action it, but only if two conditions are true.

For.e,g. The below syntax does not work. If it is only column A, it does work, but I want both A and B to be true, then copy and paste the target does not anything.

VB:
If Target.Column = 1 Then
If Target.Column = 2 Then
If Not Intersect(Target, Range("A2:A" & Rows.Count)) Is Nothing Then
If Not Intersect(Target, Range("B2:B" & Rows.Count)) Is Nothing Then
If Target.Value = "X" And Target.Value = "Active" Then

View 4 Replies View Related

Worksheet Events: Use A Worksheet Event To Change The Background Of The Current Month Two Columns In The Range To Yellow Color

Jun 12, 2007

In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.

View 3 Replies View Related

2 Worksheet Change Events (?)

May 30, 2006

2 Woksheet Change Events? I have a question similar to one that was posted about 2 worksheet change events which I found out is not possible and so I have to merge the codes together and I don't know how. I'm facing a problem in the advanced filter when I remove the last item to be filtered and takes forever to calculate.

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Address = "$F$2" Or _
Target.Address = "$F$3" Or _
Target.Address = "$F$4" Or _
Target.Address = "$F$5" Or _
Target.Address = "$F$6" Or _
Target.Address = "$F$7" Or _
Target.Address = "$F$8" Or _
Target.Address = "$F$9" Then
Range("Database").AdvancedFilter _
Action:=xlFilterInPlace, _
CriteriaRange:=Range("Criteria"), Unique:=False
Exit Sub
End If
If Target.Column = 3 Then
If Target.Value = "YES" Then........................

View 5 Replies View Related

Multiple Change Events In One Worksheet

Apr 21, 2009

I am trying to have multiple change events work in one worksheet and can not get it to work at all.

The simple setup is, I have a column for each month of the year.

I have several rows of numbers beneath each monthly column.

What I want to do is if I enter a date in say January (my change field), I want it to "ClearContents" out all of the data in the August column.

This works fine currently.

But say the next month I enter a date in February, I want to "ClearContents" in the September column. And so on for each month.

My various attempts at this does not recognize the second change agent, so nothing occurs.

Should I try to "call" each section, or use "Else If", or some other idea?

I've tried attaching the worksheet in case that helps to see what I am attempting.

There are extra "items" on the side and below the table that will be removed if I get this "change event" working. So this worksheet is a rough draft so far.

View 10 Replies View Related

Worksheet Multiple Change Events

Jan 23, 2010

I realize that it’s not possible to have on one sheet, multiple Worksheet Change Events, so I tried to come up with an alternative method of handling it, but quickly realized that it’s beyond my capabilities at this time.

I would like to set up a worksheet change event on each of a number of identical sheets. Each Change Event will run exactly the same macro. The exception is the “DeptStr” string value that is relevant to the sheet calling the macro .

Each sheet will be a different department.•If the Target in either range has data added, then data will be added to the cell offset one column to it’s right.
•If the Target in either range has data cleared, then data will be cleared in the cell offset one column to it’s right.

•There can only be one sheet active at a time.
•Only one sheet has data entered at a time.
•The two non-contiguous ranges are of equal length. Ex. (C3:C52) and (E3:E52) and are uniquely named in this case,

but they are not a necessary requirement in order to solve this problem if there is a more practical method.

View 3 Replies View Related

Combining Worksheet Change Events

Feb 12, 2007

If a cell in some parts of the worksheet (SSMa,SSDi,SSWo,SSDo,SSVr,SSZa,SSZo in the code) are selected the input (4 digits) should be converted into time (00:00).
Cells in some other parts (Util,Assis) require 6 digits and should be converted into time (00:00:00).

I had the code working in seperate worksheets but combined (as is shown in code bellow) only part of it works.

Only the input entered into the 4 digit part (SSMa,SSDi,SSWo,SSDo,SSVr,SSZa,SSZo) is converted correctly.

The input in the other parts (Util,Assis) is not converted (so when 800 is entered I do not get 00:08:00 but I get the hour equivalent of 8 days (19200:00:00) and logically the message from the EndMacro "You did not enter a valid time".
The cell formats are correct [u]:mm and [u]:mm:ss.

To me it looks like it does not jump to the 6 digits part when need but I can't figure why.

Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim TimeStr As String

On Error GoTo EndMacro

If Application.Intersect(Target, Range("SSMa,SSDi,SSWo,SSDo,SSVr,SSZa,SSZo,Util,Assis")) Is Nothing Then
Exit Sub
End If
If Target.Cells.Count > 1 Then..........................

View 9 Replies View Related

Multiple Change Events

Jul 8, 2013

In both instances I want to put a date stamp of the column immediately after the defined columns below.

The first issue is that when it runs the 1st change event, it only puts the date stamp in the top row of the column. The change in the "Inportedshapeall" column would almost always be brought about from range being copied from another column, however, I would still like a date stamp in every cell of the column.

The second issue comes about when I try to run the second change event. It simply seems to get stuck. I have tried Else, Else if, removing End ifs. I am not sure how best to define the events in order to ensure it loops through both.

VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("IMPORTEDSHAPEALL")) Is Nothing Then
With Target(1, 2)

[Code] ......

View 2 Replies View Related

MAcro To Copy Worksheet And Worksheet Events

Jul 26, 2009

I have a worksheet that utilizes a Worksheet Change Event. I created a macro to copy the sheet and that works fine except for the fact that it doesn't contain the Worksheet Change event.

View 5 Replies View Related

Conditional Formating Or Change Events

Jan 11, 2008

I have a worksheet that I would like to color a range of cell within a row whenever the value of a certain cell in that row changes. For example, if cell A3 have a value of East that row color will be Blue with white fonts, if value is West the row color will be Green with Black fonts, if value is North the row color will be Red with Yellow fonts. This should apply to any row whenever the value is Column A is changed.

View 9 Replies View Related

Additional Condition To Change Events

Jan 17, 2008

The codes below allows me to change the color of the cells in Col F & G dependence on the value of Col G. I like to add another condition and that is if Col K the value is cancelled or closed the whole row will be CellColor = 48: FontColor = 2

Sub Risk_Color()
Dim c As Range, myFontCol As Integer, myCol As Integer
For Each c In ActiveSheet.Range("f7:g20000")
myFontCol = xlAutomatic
myCol = xlNone
Select Case c.Value
Case Is = 1, 2, 3
myCol = 34....................................

View 9 Replies View Related

Toggles Selection Change Events

Jul 1, 2009

I'm trying to come up with some code that will allow a user to mouse click a cell to cut it, then mouse click another cell to paste it, then it toggles back to mouse click a cell to cut it. It would be a 2 step process for the user - select cut then select paste.

View 9 Replies View Related

Change On Events Fails To Work On 1st Use Of A Cell

Jul 27, 2013

I have set up a selection change routine which works if the cell has previously been used or if you make an entry and then change it again. I have tried to delete the empty cells 1st and then save the document, when opening the document it I enter a value in a previosly unused cell the change function does not appear to be called. There is an auto open routine that runs as well, there is more code in use but it fails at the start point.

VB:
Sub Auto_Open()
'
' Auto_Open Macro
'
'
Application.EnableEvents = True

[Code] ......

View 1 Replies View Related

Change Events Updated To Summary Page

Nov 21, 2009

I have had a TREMENDOUS amount of assistance from a true gentleman, Jaslake; aka John. In an attempt to quite monopolizing his time I wanted to throw this at the board. I have a number of sub sheets with exact ranges of (B4,d4:b44, D44) update an individual cell (H6:H86) in the” summary” page. My attachment explains it in detail but currently I will show you the formula that resides in (H6) of "Summary". (H6) = Sheet "1". This formula only covers (B4,D4:B10,D10) for example purposes but I need it to run all the way through (B4,d4:b44, D44) for all 80 sheets.

=('1'!B4) & "-" & ('1'!D4) & " | " & ('1'!B5) & "-" & ('1'!D5) & "|" & ('1'!B6) & " - " & ('1'!D6) & "|" & ('1'!B7) & "-" & ('1'!D7) & " | " & ('1'!B8) & "-" & ('1'!D8) & "|" & ('1'!B9) & " - " & ('1'!D9) & "|" & ('1'!B10) & " - " & ('1'!D10).

Results look like this:

March 01, 2009-Today looks good | March 02, 2009-Today looks bad|March 03, 2009 - Today we had issues in Boston|March 04, 2009-Issues in Dallas | March 05, 2009-Issues In New York|March 06, 2009 - New York is complete|March 07, 2009 - Dallas is Complete

NOW, with this said what I really would like to happen, if it is possible, is to have the "Summary" (H6) only have the last range that has been updated showing. So if currently B4,D4 is showing in (H6) once the user types into B5,D5 then it replaces B4:D4. I would like this action to repeat itself until the user has completed their event. The reason I can not stick with a formula in (H6:H86) is because I have a macro running a copy.paste, then clear.contents once a selection is made in Column 4. The information must remain on the sub-sheets but it can be replaced in “Summary “. “Summary” is only a quick view of the current status while the sub sheets are a log of all the work done. So, the following

View 2 Replies View Related

SaveAs Triggers ComboBox Change Events

Jan 4, 2009

I have a workbook with several worksheets. One sheet ('Forecast') contains 12 ComboBoxes, which, on a Change event, run a series of macros to show the users certain information and provide certain options: protected 'Budget' or 'Actual' data from a hidden datasheet, or unprotected 'Forecast' cells that respond to user changes. In other words, I can't simply use a series of 'If' statements or VLookups with conditional formatting to get around the ComboBoxes.

OK - So in ordinary use, the ComboBoxes and macros are working as intended.
But there is one situation that causes problems:

When a SaveAs command is used to save the model under a different name, all 12 ComboBox Change Events are somehow being triggered.

So what is it about a SaveAs command that triggers ComboBox Change events?!
And whatever it is, can I turn it off?

(This happens in Excel versions 2000, 2003 and 2007.)

View 9 Replies View Related

Change Events - Depends On Cell Values

Jul 6, 2009

I receive real time data ( Last Trade Price ) of soybean commodity futures through DDE in to excel ( cell A1 ). During market hours A1 will keep updating every milliseconds or seconds.
My cell B1 ( =A1 ) will have same value as A1 and will update at the same time.

What I'm looking for - A macro code so Whenever value in B1 is between 9.5000 and 9.5050, I want run a subroutine ( similar to calling a macro ). Since B1 would change dynamically so everytime B1 comes between range 9.5000 and 9.5050 a subroutine is fired.

I'm planning to CALL following subroutine -
Sub BuyBeanst()
Range("N9").Activate
ActiveCell.Value = "Y"
Range("T10").Activate
ActiveCell.Value = "Y"
Range("T11").Activate
ActiveCell.Value = "Y"
End Sub

View 9 Replies View Related

Multiple VBA Calculation Events To Just One Worksheet

Oct 14, 2009

I use VBA's WorkSheet_Calculate event to detect when a cell of particular interest calculates to a specified value. It works well as long as there is only one worksheet (tab). However, when I duplicate that tab (and the final app could have up to 10 copies) to run a different set of data concurrently, I get bad results. The data is online, real time trading data, with each selected stock being tracked in a different tab.

Apparently both (or all) tabs in the workbook react to the same event, whereas I would assume that the event routine in each tab would react only to a calculation in that tab. If this is in fact the case, is there a way to a) make the event routine in each tab respond only to a calculation in that tab, or b) upon a calc event anywhere, determine which tab it occurred in?

Here is the present event code; right now it reads exactly the same in every tab. As long as nothing is happening in any other tab, it does its job correctly.

View 4 Replies View Related

Worksheet Events To Trigger Other Worksheets

Jun 25, 2007

I have a workbook with 4 sheets "Sheet1","sheet2","sheet3" and "sheet4". There is a macro "execute" in "sheet4". How to use the worksheet events, so that if anything on "sheet1", "sheet2" or "sheet3" changes, the macro "execute" in "sheet4" is excuted.

View 5 Replies View Related

UserForm Textboxes Triggering Events - Even After Events Have Been Disabled?

Oct 20, 2012

I have a UserForm with a Text Box, I populate that Text Box with a number (say 5) and then the following code runs:

Code:
Private Sub tbOverrideMokWh_Change()
Application.EnableEvents = False: Application.ScreenUpdating = False
With tbOverrideMokWh

[Code]....

After the Sub is run 1 time, it runs again. Why? I've disabled Events?

View 6 Replies View Related

Paste Multiple Private_Sub Worksheet Events

Oct 9, 2008

I have 2 codes that I'd like to run on the same worksheet, but i don't know how to paste them in together. This may happen many times in the future, so I'd like to know what rules to follow or how to configure 2 codes such as this to get them to work. For example, here's 2 codes I need ran on the same worksheet and I tried pasting one after the other and it won't let me do both.

View 2 Replies View Related

Nested IF In Worksheet

Jan 11, 2009

I want to get the result in D1 cell. In A1 Pay Amount, B1 Date of increment, C1 Pay month is written. I want D1 to be filled with new Pay. I change B1 looking at one's date of increment. Initially, the Pay is 10000 to be put in D1(as is done). But, if B1 cell is changed, then 3% of A1 should be added to that particular month every year for 12 months. E.g. if I change B1 to 01/05/06, then till D4, pay should be 10000 and in D5 pay should be 10300 for the next 12 months and again 3% of 10300 for the next 12 months i.e a change of Pay should be in D17, D29 and so on. As because, in the nest IF condition, 7 IFs are available, how best can I solve this? Is it possible in Excel?

A B C D
10000 01/01/06 01/01/06 10000
01/02/06 10000
01/03/06 10000
01/04/06 10000
01/05/06 10300
01/06/06 10300
---
---
01/12/06 10300
01/01/07 10300
01/02/07 10300.................

View 9 Replies View Related

Add Nested Formula To Cell On Another Worksheet

Sep 25, 2007

One of my macros is a tied to a worksheet_change. The macro runs and gives me the result that i want, however excel flips to the sheet that the sub is running for.

example:

Sheet1, Change the cell
excel flips the visible to sheet2
macro runs

Its kinda of annoying. I would like excel to stay on sheet1 where i am trying to finish data entry. I suspect it is how i have writen the macro. Any help at all on how to clean it up.. or a better way to write the same thing would be very appreciated.

Sub TermPlacement()

' Term_Placement Macro
' Uses the Value of Term to insert a formula repeatedly in a colum.

Dim sNFormula As String
Dim rTerm As Range
Dim rStart_Cell As Range
Dim rNpayment As Range

'The reference cell located directly above the first cell in column
Set rStart_Cell = Worksheets("Floor Plan").Range("$B$13")
'Additional set values....................

View 9 Replies View Related

Nested IFs Statement That Looks At A Range Of Cells Between 2 Tabs Within The Same Worksheet

Jun 8, 2006

I'm trying to create a nested IFs statement that looks at a range of cells between 2 tabs within the same worksheet, determines if there is a value of 1 in ANY of those cells, and if there is, to multiply the value of yet another cell by 1 in a cell on the second tab. So, if 1 is a value in any cell of Tab 1 cells C82 to C86, then in Tab 2 cell B21, multiply 1 by the value in 'Tab 1 Cell H5'.

I've tried this =IF(('LM fundamentals'!C82>=1), ('LM fundamentals'!C83>=1), ('LM fundamentals'!C84>=1), ('LM fundamentals'!C85>=1), ('LM fundamentals'!C86>=1), 'Order Information'!$B$21!=(1* 'LMfundamentals'!$H$5!))

I even tried a vlookup, having given the cell range in Tab 1 a name, etc. But I have little skill with logic statements, apparently.

View 5 Replies View Related

Nested If Or Select Case Statement To Handle A Worksheet Event

Jan 31, 2010

I would like to have a nested if or select case statement to handle a worksheet event.
The conditions it will check are:
1.Make sure target is w/in range, otherwise EXIT
2.Make sure that target offset value is not empty, otherwise display message
3.All is good, open form

I’ve tried various formulations and positionings of the statements ,but not all conditions are met with equal success.

What happens is I get the the first two conditions, but the third doesn’t work.

View 6 Replies View Related

Worksheet Change To Function To Add Text To Cell Which Initially Triggered Change

Jan 10, 2014

i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.

The existing code i have is:

Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"

[code].....

I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?

View 3 Replies View Related

Worksheet Change Event :: Change Color As A Result Of Calculation

Jun 17, 2009

an event macro to change the font colour of a cell whose value changes as a result of a calculation.

View 9 Replies View Related

When Change The Worksheet Selection Change Event Nothing Is Happenning

Jul 21, 2009

Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.

When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.

View 4 Replies View Related

Worksheet Change Event Triggered By Formula Change?

Dec 6, 2011

Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.

My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.

Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.

how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?

View 5 Replies View Related

Worksheet Function: Change C2 To Change To Activecell Column + Row 2

Jun 23, 2006

How would I add this formula as a worksheet function with VBA. I can't see INT, MOD or Year in VBA. Also want to change C2 to change to activecell column + row 2.

=INT(((C2-1461)- SUM(MOD( DATE(YEAR(C2-MOD(C2,7)+3),1,2)-1461,{1E+99,7})*{1,-1})+5)/7)

View 4 Replies View Related

Excel 2007 :: Automatically Change The Worksheet Tab Names With Cell Value In Each Worksheet?

Feb 14, 2012

I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved