Is there a way to have a macro run every time a sheet in a workbook is accessed? Something similar to the workbook open event, but for worksheets.
View 2 RepliesIs there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies View RelatedIn R1 I sometimes place a cell reference that I want the workbook to immediately go to when it is next opened. I have the following code which does not work as expected (Ignore the necessary .Select parts):
Code:
Private Sub Workbook_Open()
Sheets("MSCI Asia Data").Select
Range("R1").Select
If Not IsEmpty(ActiveCell) Then Application.Goto reference:=Range(Range("R1").Value), scroll:=True
End Sub
Currently R1 contains the value R91 but when the workbook opens, it is not going to the cell R91 in the required worksheet.
Have some code in the workbook open event, which when I run when the workbook is already open works fine, however when triggered when the workbook is actually opened it fails on the first line.
Code:
Private Sub Workbook_Open()
Dim lngLastRow As Long
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim ws3 As Worksheet
Dim X As Long
Dim Y As Long
'Define Worksheet
Set ws1 = Sheets("Sheet1")
Set ws2 = Sheets("Sheet2")
Set ws3 = Sheets("Sheet3")
Sheets("Sheet1").Activate
create this macro.
I am trying here is,
I have open workbook with command button, by pressing it it should do followings
Copy Range ("A1 : C20")
Open a closed workbook
Add Sheet with date format
Paste the range in Created sheet in A1 to C20 column.
The use of this userform is to find a customer reference number. Im using two combobox's and a textbox.value that are populated from another workbook.
Though the way it is at the moment it opens the workbook and closes the workbook every time a new value is set to one of the combobox's.
I want to open the workbook on the useform initialize and do everthink the useform need from it. And then on the userform terminate close the workbook. Or somehink to this equlivent so this process of finding the customer referance number goes faster.
I have an Excel application in which I use the Workbook Open event to show a userform.
This works fine when Excel is not already open, but if another Excel workbook is already open, the Workbook Open event does not work.
I have a macro that checks if a username is in a particular list, and if it is, it unhides certain sheets in the workbook.
The code runs fine if I just run it as a macro or off a command button, but I am trying to execute it when the workbook opens and I keep getting a 57121, Application defined or object defined error.
The code is below;
Private Sub Workbook_Open()
DoEvents
Dim Res1 As VbMsgBoxResult
Dim GovRng As Range
For Each GovRng In Sheets("Map").Range("GovernanceMembers")
If GovRng.Value = Application.UserName Then Goto 111
Next GovRng
Exit Sub
Is there any way to have a input box pop up after a Prescribed number of days or on a particular date and from that point on prompting the user to enter a password that I created (hard coded into the code)In order for the workbook to open If the password is not entered or is not correct then the workbook will close.After the pasword is enterd then the workbook would open from that point on(the input box would be disabled) Also this macro would have to be password protected in order to prevent the user from accessing the code.
View 8 Replies View RelatedI need to use the Worksheet Change event in a particular sheet in a specified column which works fine if the data is already there in the sheet and then changed however,the data is in this sheet is actually a Sub-Set of a Main sheet i.e certain filtered records are being copied from Main Sheet and then copied to this IBSL Sheet.
After the data is copied I have to check each record manually and then categorize each record as Fresh , Rebooked , Cancelled , Tranch or On-Hold.....These 4 criterias are added in the Column 38 and the same thing has to be repeated in the column 40 , so when i change the data in the column 38 the same category has to be updated in the same row in the column 40..
But the problem is that the data is first copied from the Main Data Sheet into the IBSL Sheet using a Macro so then this even t gets fired and goes in the DEBUG MODE...
I need this to happen when i change the category manually..I am adding data validation at the same time while copying the data in to the TEMP sheet.
So what can be done to achieve..
I was asked to create a userform for the use of our whole team which would enable them to select a name from a dropdown list and then it would display their business contact details in the rest of the form.
I'm running Office 2010 and Windows XP server/enterprise edition (not quite sure which). After some research I've managed to use VBA code to open the userform while hiding the workbook, then when the close button is clicked it closes the user form and it's associated workbook using the code below.
Code:
' ThisWorkbook module
Private Sub Workbook_Open()
Application.Visible = False
UserForm1.Show
End Sub
'UserForm module
Private Sub CommandButton1_Click()
Unload UserForm1
ThisWorkbook.Close (False)
End Sub
This works great when the excel file is accessed directly. However when the excel file is accessed via the link on my teams Sharepoint site it doesn't. When the Userform is closed the underlying workbook and data is then displayed which then has to be closed separately.
why this code does not work when the worksheet is changed between range "B1:F5"?
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1:F5")) Is Nothing Then
With Range("B1:F5")
Cells(Target.Row, 7) = Cells(Target.Row, 6).Value + Cells(Target.Row, 5).Value
End With
End If
End Sub
Anyone know of a way to capture who (user name, machine name etc.) had the excel file open when a certain cell is selected? a Macro?
Trying to use an Excel spreadsheet for a peer review where each reviewer accesses the Excel peer reivew file and enters the minutes they spent in the peer review but would like to also capture the user that had the file open when the minutes spent on the peer review were entered. This would provide proof that the actual peer reviewer opened the file and entered their minutes.
is it possible to write vb code to open the workbook, scroll through everysheet? extract the values from each worksheet?
let's just say, I only know the workbook name, but not the sheets of the name inside. So the vb code could scroll through every worksheet without knowing the worksheet name, only the workbook name(workbook.xls)
I have many worksheets in a workbook that need to be saved if a user changesanything on them.
These sheet names all end in "....SD" and the code needs to only run on those sheets. I have learned alot from the forum but not enough, just yet . . This is what I have so far:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim sht As Object
For Each sht In ThisWorkbook.Sheets
If LCase(Right(ws.Name, 2)) = "sd" Then
MsgBox(Prompt:="You must save changes. Save now?", Buttons:=vbYesNo) = vbYes Then ThisWorkbook.Save
End Sub
It doesn't like the 2 "Then's". (Don't laugh - I'm trying.)
I have the following code what it does, is when a user changes a cell it copies the row to another sheet along with the userstatus. Problem is if the user pastes more than one column of data into the sheet it copies the row more than once depending on the amount of columns the user pasted . I only want to copy the row once.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim SelRng As Range
If Not Intersect(Target, Range("A3:K30")) Is Nothing Then
Set SelRng = Target
Application. ScreenUpdating = False
For Each cell In SelRng
Range(Range("A" & (cell.Row)), Cells(cell.Row, Columns.Count).End(xlToLeft).Offset(0, -5)).Copy
Sheets("Tracking").Select
ActiveSheet.Cells(Rows.Count, 31).End(xlUp).Offset(1, -13).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
ActiveCell.Offset(0, 13).Value = ActiveWorkbook.UserStatus
Sheets("Engine 1").Select
Next cell
Application.CutCopyMode = False
Application.ScreenUpdating = True
End If
End Sub
i have a workbook that is only 345kb in size it takes ages to open and although it has lookups and retrieves data from the web it just seems like it shouldnt be so slow
i also keep getting a message at the bottom like this:-
calculating (1 processor ) thena %
Need to have a particular workbook open at a specific time...
I wrote this and placed it in a Personal.xls module, did not run automatically. I then placed the 2nd SUB() in the "This Workbook" and nothing. Where or how is the proper way to run this...
----------------------------
Sub Open_IndexAnalysis()
Workbooks.Open Filename:="e:Index Analysis.xls"
End Sub
------------------------------
Sub Run_OpenIndexAnalysis()
Application.OnTime TimeValue("09:40:00"), "Open_IndexAnalysis"
End Sub
-----------------------
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer
'Dim thiswb As Workbook
officen = Range("A2").Value
Set thiswb = ActiveWorkbook
' Open the Active Info file
Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx"
' Dim sourcewb As Workbook
Set sourcewb = Workbooks.Open"Active 20080616.xls"
Sheets("officen").Select
RowCount = ActiveSheet.UsedRange.Rows.Count
Range("B2").Select.............................
i get the following error everytime i open my workbook
Removed Records: Object from /xl/printerSettings/printerSettings2.bin part (Print options)
Removed Records: Object from /xl/printerSettings/printerSettings3.bin part (Print options)
ive tried everything. ive attached the workbook (obviously with all data removed).
I did a macro on my mac to transfer a sheet from one workbook to another worbook. It works very well when the destination workbook is open. Therefore I wanted to add some piece of code to check if the destination workbook is open. If not then I wanted the macro to open it before tranfering the sheet. Here is the code I´m using for tranfering the sheet
Sub Transfer_Sluttet()
If ActiveSheet.Index <> Sheets.Count Then
Application.DisplayAlerts = False
Set ws = ActiveSheet
Sheets(ws.Index + 1).Delete
ws.Move Before:=Workbooks("Sluttet.xls").Sheets("sheet2")
'Moves active sheet to beginning of named workbook.
'Replace Test.xls with the full name of the target workbook you want.
Application.DisplayAlerts = True
End If
End Sub
This is the type of macro I useually use on my pc to check if a workbook is open and if not then open it
If IsWorkbookOpened("Filename.xls", "C:Documents and ..................
i currently have a workbbok that i have a very simple worksheet event macro that will filter a seperate sheets contents to the corresponding entry number. is there any way to make a dynamic event macro that will filter my second sheet depending on what cell is selceted on the first.
for example record 1 on sheet 1. if cell L1 is selected it will filter sheet 2 to to record 1, record 2 on sheet 1, if cell L2 is selected it will filter sheet 2 record 2 and so on. this list of records will continue to grow and i cant think of any way other than what i currently have, which is to make each filter macro for every cell.
is ther a better way example of CODE HERE
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Target.Address = "$L$5" Then
Call Filter1
[Code]....
I have a workbook with several worsheets in it. I wish to have the first worksheet as a list that will be hyperlinked to the other worksheets within the documant.
Is it possible to save the workbook so that it will open at the first worksheet every time irrespective of what worksheet you were on prior to clicking save.
In Col D of my spreadsheet, I have a list of security codes, in this list there is a security code "all", i need a macro that will add 1 to the code, so it reads "all1", now i need the macro to run as soon as new data is pasted to sheet "Lending", the ranges in Col D do change on a daily basis therefore cell reference for security codes is not fixed.
Can this be achieved? ............
I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
View 2 Replies View RelatedHere's my macro:
Code:
Sub CopyRow()'
'Copies row to new sheet, highlights it, marks column 'A' as copied.
'
Dim cCell As Range
Set cCell = Selection.Cells(1, 1)
Selection.Copy
Sheets("Sheet2").Select
Rows("2:2").Select
[Code] .....
Is it possible to modify it to paste into a different workbook called c:filesDestination.xlsm, instead of the existing workbook (Source.xlsm)? The destination sheet name is the same (Sheet2). It's OK if both workbooks are open at the same time.
When I open my workbook, I'd like to go at the first empty row of the worksheet.
View 14 Replies View RelatedI have a macro that 'opens all' workbooks in the specified folder. I've copied it over, but need to only open all the wbk's if a specified worksheet exists w/in the wbk..I know there is a dim ws statement that can be used, but how do i use it w/ the current macro?
Option Explicit
Sub recTestOpenAll()
Dim x As Integer
Dim WB As String
Dim wbk As Workbook
For x = 1 To 100
WB = "G:Rule Test FilesREC " & x & ".xls"
On Error Resume Next
Set wbk = Workbooks.Open(Filename:=WB)
On Error Goto 0
If Not wbk Is Nothing Then
End If
Next
End Sub
1. I receive a weekly report 'Over Due Orders_1_14_08.xls' for example. This is sent every Monday and there is a Worksheet on this report called Raw Data.
2. I want to copy Raw Data from that Workbook but the name of the report changes w/ every Monday's date.
Any way of doing this - like just looking for "over due orders" in the Workbook name?
I have the following code below for a timer in a userform. Right now it is configured to start when a button is clicked. I would like to have it automatically start the timer after the workbook is open for more than 5 minutes but so far have been unable to get it to do so. I have tried putting the code in the workbook module but it still won't run. It also has a button to reset the timer if they need more time in the workbook and also a button for them to save and close the workbook if they are finished. I'm running Excel 2007.
VB:
Private Sub CBReset_Click()
Dim T, E, M As Double, S As Double
T = Timer
Do
E = CDbl(Time) * 24 * 60 * 60 - T 'elapsed time in secs
M = AllowedTime - 1 - Int(E / 60)
S = 59 - Round((E / 60 - Int(E / 60)) * 60, 0)
[Code] .....