Open Another Workbook For Multiple Userform Event Use.
Sep 12, 2009
The use of this userform is to find a customer reference number. Im using two combobox's and a textbox.value that are populated from another workbook.
Though the way it is at the moment it opens the workbook and closes the workbook every time a new value is set to one of the combobox's.
I want to open the workbook on the useform initialize and do everthink the useform need from it. And then on the userform terminate close the workbook. Or somehink to this equlivent so this process of finding the customer referance number goes faster.
In R1 I sometimes place a cell reference that I want the workbook to immediately go to when it is next opened. I have the following code which does not work as expected (Ignore the necessary .Select parts):
Code: Private Sub Workbook_Open() Sheets("MSCI Asia Data").Select Range("R1").Select If Not IsEmpty(ActiveCell) Then Application.Goto reference:=Range(Range("R1").Value), scroll:=True End Sub
Currently R1 contains the value R91 but when the workbook opens, it is not going to the cell R91 in the required worksheet.
Have some code in the workbook open event, which when I run when the workbook is already open works fine, however when triggered when the workbook is actually opened it fails on the first line.
Code: Private Sub Workbook_Open() Dim lngLastRow As Long Dim ws1 As Worksheet Dim ws2 As Worksheet Dim ws3 As Worksheet Dim X As Long Dim Y As Long
'Define Worksheet
Set ws1 = Sheets("Sheet1") Set ws2 = Sheets("Sheet2") Set ws3 = Sheets("Sheet3") Sheets("Sheet1").Activate
I have a macro that checks if a username is in a particular list, and if it is, it unhides certain sheets in the workbook.
The code runs fine if I just run it as a macro or off a command button, but I am trying to execute it when the workbook opens and I keep getting a 57121, Application defined or object defined error.
The code is below;
Private Sub Workbook_Open()
DoEvents
Dim Res1 As VbMsgBoxResult Dim GovRng As Range
For Each GovRng In Sheets("Map").Range("GovernanceMembers") If GovRng.Value = Application.UserName Then Goto 111 Next GovRng
What I would like to do is to be able to open a second workbook from a user form, preform some work on it then save and come back to the same place in the original user form.
So in steps:
1 : user clicks command button to open user form 2: user then clicks on command button on userform that opens 2nd workbook via a yes / no message box, but closes userform on 1st workbook (would be ideal if this could stay open, but hidden) 3: user then does work on 2nd workbook, 4: userform on 2nd workbook saves then activates the 1st workbook and reopens the userform
This is where no matter what I try I cant get the command button on the 1st userform to be clicked automatically so the yes / no message box appears.
This is part of the code in the 2nd sheet commandbutton that saves / closes / opens
Code: Unload Me ActiveWorkbook.save Windows("ABC.xlsm").Activate Sheets("Request Sheet").Activate Call Sheets("Request Sheet").ForceClickOnBouttonXYZ Call UserForm1.CommandButton6_Click 'this is where I cant get it to work!! Windows("xyz.xlsm").Close ABC is the 1st workbook xyz is the 2nd workbook
This is the code on the 1st workbook I use to call on the 2nd workbook
Code: Public Sub ForceClickOnBouttonXYZ() Call CommandButton1_Click End Sub
I have a workbook ("Time") that when opened displays a userform. I also have another workbook ("Master") that opens the "Time" workbook to retrieve information. Is there a way to use the Master workbook to open the Time workbook WITHOUT displaying the userform.
I have a userform with several buttons on, each doing seperate tasks, three of the buttons however are used to load a workbook stored elsewhere in our central data storage drive. Loading these workbooks is not the problem, the problem is when loading these they load up behind the userform and not in a new window.
I have a Userform with a textbox in it. The user is asked to enter a serial number and press Enter. When the Enter key is pressed, I would like to search for that serial nember in "SourceWorkbook.xls", Sheet1, in column A (or B). If the Serial number is found it should be placed in "DestinationWorkbook.xls", Sheet1 Cell A1 etc. If no serial number is found I would like to display a message about it it. The workbooks are already opened.
I am using Excel 2010 and late binding to generate reports. The sheets are blank and unused. I have the UserForm being opened on Workbook_Open and the actual VBA for doing the work in a separate macro in the workbook. All the posts I have found are dealing with accessing cells from the UserForm and I haven't found any dealing with connecting a macro to the UserForm output.
My question is this: I want to return from the UserForm the flags of which reports to run to the (unopened) macro containing the code to do so. How do I open the macro and pass the variables to it?
The UserForm is creatively called "SelectionForm" and the macro is called "DailyFTP" with a Main sub as the entry. I know I can use the code under to capture the radio button and checkbox choices. I have other variables like the names of files set as global variables in the DailyFTP macro. The macro doesn't exist until SelectionForm opens it, so they must be set after the macro is in memory.
I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook Copy range (c8,d69) Close work sheet Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
I have Monthly sales sheets that import my cash register data into them. I wanted to set them up to do everything without being there. So I have my task manager open excel at 9:30pm everyday and it runs the macro to import the data into the correct day of the month. Here is the workbook
open macro-
Private Sub Workbook_Open() Dim dTime As Date dTime = Time If dTime >= TimeValue("9:30 PM") And _ dTime < TimeValue("9:40 PM") Then ImportData End If End Sub
This is in my July spreadsheet only. So is there a way to make it know which month spreadsheet to open on the 1st of the month? So come August 1st it will automatically open the August workbook and input the data for the first day? By using the date?
I have a userform which loads the data into a worksheet named "Data" which is being used as a database for an event scheduler. I also load a calendar from a worksheet named "Month" so I need the information from the userform "UForm01" added to 2 worksheets.
The userform adds a series of textboxes to worksheet "Data" in the first open row. I also need certain textboxes from the Userform to be added to another worksheet to populate the calendar.
So I have a sheet that has a calendar control on it. I'm trying to make it so that when I open excel it automatically sets the calendar to todays date. I'm using the code:
VB: Private Sub Worksheet_Open() Calendar2.Value = Date End Sub
If I click the play button the calendar changes to today's date. However, when I open excel it doesn't work. I saw screenshots online where the dropdown box to the right (in VBA) that lists the events had 'open' listed there. Mine does not. It appears as if the 'open' event is missing from the 'library'.
I have a presentation that I open from a short-cut. After the "Welcome Page" is opened, I want to open a second workbook in a new instance of Excel after 4 seconds.
I think that I can open the new instance of excel, but I don't know how to activate the macro after 4 seconds.
I'm sure there is a function someplace for this that can be used in a macro.
Then, after the second Workbook is opened, I want the Welcome Page "Workbook" closed, leaving the second Worbook open.
I have a Listbox which brings up a list of files in 2 folders. The code works perfectly and I have no problems with it however I would like to add a further bit of functionality to the ListBox using:
I am having difficulties with my Worksheet_Activate() macro. It works great within workbook1 when it is only workbook1 open - but when I open another workbook2, the macro stills runs, presumably because Sheet1 of workbook1 is still activated as well as the newly activated sheet in workbook2.
Is there a way to ensure that only 1 worksheet of 1 workbook is activated at a time? Or that sheet1 of workbook1 is deactivated when workbook2 is opened/clicked on? I need my Worksheet_Deactivate macro to run to get rid of my Worksheet_Activate macro (which runs an application that resets the function of keyboards keys). Otherwise moving around workbook2 is a nightmare. When I navigate back to workbook1 while workbook2 is still open, I still want sheet1 of workbook1 to be activated and my macro to run .
In a Userform, is there a way to run code that's listed under another UserForm event subroutine?
Example:
I have a Listbox and several Labels. When I click on a selection in the listbox, it populates the labels with various data from a spreadsheet. This code is in a "list_AfterUpdate()" subroutine.
If I change a piece of data and click a CommandButton1, I would like the labels to automatically update.
The only way I can think to do that (at present) is to run the code listed in the "list_AfterUpdate()" subroutine.
Is there a way to run that code without duplicating it in the "CommandButton1_Click" subroutine?
My Splash screen opens a few seconds after the workbook has loaded. Is there a way to make the workbook open minimzed until the the splash screen closes then open properly? What I trying to say is that only the splash screen is visible until it closes.
I have a before print event that shows a userform - the user can then select which worksheets they want printed and select a command button. I then have a loop set up that loops through the selected workbooks and prints them. The problem is I am not sure how to tell VBA to print without it going back to the Before Print event userform.
Is there an event that fires every time anything is clicked within a userform? I have seen the userform_Click() event however, this only works if the userform is clicked directly and not if something like an image is clicked on top of it.
I have a userform that i have set the showmodal property to false.
This form has a list box that is populated with a huge list of items. I have a textbox in the userform that i use as a filter. so as the user types in something it filters the results in the listbox.
This was working fine but I added to the code to put a tooltip in when hovering over a item in the listbox. (using windows API to achieve).
The problem now is after i type one letter in the text box and it runs the change event it doesnt place the cursor at the end of the textbox anymore to continue typing.
I have tried setting focus to the textbox at the end of the event but nothing happens. I have searched all over the internet with no luck.
I create a series of labels and text boxes at runtime.
Code: for x = 1 to 10 labelName = "label" & x Set cControlLabel = Me.frameScrollable.Controls.Add("Forms.Label.1", labelName, True) next x
How can I assign an on_click event to these? I have seen some rather complicated suggestions such as creating code for each possible object, but there could possibly be hundreds of labels created. It would be nice to be able to call the same macro from each label click, and then take action based on the .caption property of the label.
I would like to write a Sub that will see if a workbook is open and if it is not then open it. I know how to have a macro automatically open a workbook, but I run into problems when the macro runs and tries to open an already opened workbook.
