# Converting Prices In Ticks To Decimals

Feb 12, 2010i am trying to convert 100.50 to 100-16, agency mortgage price formats ...

View 9 Repliesi am trying to convert 100.50 to 100-16, agency mortgage price formats ...

View 9 RepliesADVERTISEMENT

--------------------------------------------------------------------------------

Ok i have a formula that i use to convert bond prices, which are in 32nds to numbers that excel can understand. I use the formula:

=LEFT(F7,FIND("-",F7)-1)+SUBSTITUTE(RIGHT(F7,LEN(F7)-FIND("-",F7)),"+","")/IF(RIGHT(RIGHT(F7,LEN(F7)-FIND("-",F7)),1)="+",64,32)

This allows me to type 101-16 in and excel recognizes this as 101.5

My problem is that my data I am copying into the sheet is often in 1/8ths. So the price will come in as 101-272, which means 101-27 and 2/8 (or 1/4).

I admittedly dont understand this formula and just use. Can someone help me tweak it to recognize the third digit?

Can anyone help me with a code for converting decimal number to a nearest 1/16 th fraction. For example converting number 2.1875 to 2 3/16 and so on...Also if it is 2.5 it should display 2 1/2...

View 14 Replies View RelatedHow can I show a decimal as time. For example an item takes 13 minutes to make and I want to make 50, thus using 6.5 hours but really, the 0.5 hours is 30 minutes therefore, I would like to show 6:30 but Excel gets to 23:59 and goes back to 0:00.

View 9 Replies View Related=("0 "&C3)+0

have this formula for converting fractions to decimals which works great,

the problem i have is to get it to register 0 if there is no fraction in c3

will try and word my next question better

I received a complaint from one of my colleague that he is facing sudden problem with Ms-Excel(2002)

The problem is When he feeds number 2 in to a cell it automatically converts in to 0.02. I tried using "Decrease decimal" and "format cells" option and even through uninstalling office and reinstalling a different version but the problem still continues.

How do I convert hours into numbers and/or decimals?

Example:

Column A Column B

---------- -----------

30:05:00 to 30.05

26:10:00 to 26.10

262:47:00 to 262.47

Figures under Column B refer to info that I would like to get.

I am trying to convert Degrees Minutes & Decimals of a minute (12° 34.567') to Degrees and decimals of a degree (12.57611°). I have the formula to convert latitude, that is two digits, but it doesn't want to work with longitudes, three digits. (see attachment). This is the formula that I am using:

=IF(A2="","",(INT((LEFT(A2,3)+MID(A2,4,6)/60)*100000)/100000)&"d")

I have a file in which I tracking the monthly submission of different project. If the project is late for it's May's submission it will get a tick in the cell. I need it to highlight 2 cells in the row (Action Plan and Target Date) if it is late for 3 consective months in the past 5 months.

For example, in Apr-09, the 5 months I am interested in is Dec-08 to Apr-09, if during that period there is 3 consective late submission. I will need to highlight 2 cells in the rows. If the month is May-09, the five months I am interested in is Jan-09 to May-09.

I am doing a scatter plot of several columns and have the x-axis grid lines turned on. What is apparent is that the grid lines and tick marks are slightly off. In my case, when the point value is 6.004 the tick mark and grid line for the value 6 draws through that point.

I am using Office 2003. This was tried in Office 2007 as well with the same result.

1/1/20080:221/2/200814:051/1/20082:451/3/200819:301/1/20089:001/1/200819:33

In time Out time

I 've used the site many times in the past, but this is my first post.

Above is a small example of the data Im working with. I'm not wanting to plot all of this out by hand, so hopefully someone can help (there are around 30,000 samples). I'm looking to track by hour when a customer is actual here. The first row is one customer in @ 00:22 and out the next day at 14:05.

I would like to have dates of the year down column A and hours 0 through 23 across row 1. Then a number of customer here on 1/1/2008 by every hour of the day on to 1/2/2008 so on and so.

I use webdings font with the letter 'a' to get a tick in excel but the it erases gridlines surrounding the cell i've ticked.

View 3 Replies View RelatedI have this excel sheet with 200+ (number can change depend of situation) checkboxes here and I would like for the worksheet to do the following:

1) when i click on the checkbox, it copies all the data in the same row as the checkbox to a seperate sheet (sheet2) and not leaving any spaces if checkboxes are not click in order.

Here comes the addition...

2) when i uncheck the checkboxes, the row that associated with the checkbox will be removed.

3) the checkboxes will all be uncheck with a commandbutton (reset switch)

4) variable number of checkboxes so that i dont have to link the subroutine to every checkbox with the move and remove subroutine. (because there will be unknow number of checkboxes and mostly 200+)

example (want to be able to replace all the 1, 2, 3...with an X or any way possible)

Private Sub CheckBox1_Click()

MoveCheckBoxData CheckBox1

End Sub

Private Sub CheckBox2_Click()

MoveCheckBoxData CheckBox2

End Sub .........................

I am simply trying to write a macro or code that will set all the check box values to "False" each time I initiate the User form. So that the user form does not "carry over" check box values from the last time the User form was used.

However I had to make sure I cleared the value from the cell that each control is associated with.(the controlsource in the user form properties.)

I am looking at trying to do a complex rounding within Excel. I have a spreadsheet of all my product with my cost. I then convert to show what margin I want to sell my items at and then round to .99.

What I am looking at doing is getting my pricing more uniform so that instead of having 23.99, it is 24.99 or 20.99 it is 19.99. I want all the numbers in the ones' spot to round depending on a set parameter.

I have played around with if statements, but can not get it to work fully. Basically if the ONES number is 0 to 2 I want it to round down to 9.99 (ie first was 21.99 I want it to be 19.99) from 2.01 to 4.98 to round to 4.99 and then 5.00 to 9.98 round up to 9.99.

I have a spreadsheet with rows of entries that are listed by date. I would like to create anther worksheet where i can refer back to the other sheet and calculate the total prices per work week. Is there a way to do this using a function(s)?

View 14 Replies View Relatedhow do i download historical stock prices for approx a hundred stocks i.e what code would suffice?

View 9 Replies View RelatedI have to update our ticker(US and Can stock) prices manually in our portfolio system.

I use www.bigcharts.com as our source . I can import the file in Excel. So what I would like to do is update the prices in Excel from the bigcharts.com. Not just today's prices but prices from previous day or two as well. Once I go to the website, I click historical quotes, then type in the stock symbol, and the date ,then write down the price.

Would Excel web query be the best way to approach this? If so, how would I import the the price for that particualr ticker for that date from the website into my excel?

Refer to the attached sample workbook,

(Keep in mind that there is an error in the sample workbook; Im not sure how to remove and re-attach the sample workbook as this is my first day on this forum.)

Cell F19 should contain =D19*B19

Column 1- These values will not change and represent price/cost of each UNIT

Column 2- "UNITS" the quantity or number of items at column1 value

Column 3- "$ AMT" the total cost of UNITS at that price/cost, i.e. Column1*Column2

Im looking for a way populate the values in Column2 when, "NUMBER OF UNITS" AND "AVERAGE COST PER UNIT" are changed

Ideally speaking, As few units in one row as possible to allow for a good mix.

For example: What i don't want is $9000*86 for 774k.

If it helps: "AVERAGE COST PER UNIT" will always be a whole number rounded up to the nearest 1000.

I believe a Most Even distribution of units will work fine.

After the distribution/population of fields in column2;

D29 must equal F3

F29 must equal F7

I'm looking for something that will populate the values in D12:D27 while adhering to the two conditions above. Even when the Input at F3 and F4 are changed.

The values in "UNITS" represent the number of a specific cost item in inventory when added together do not exceed the "TOTAL COST OF INVENTORY". Depending on store location, the "AVERAGE COST PER UNIT" and/or the "NUMBER OF UNITS" will change. It will be used to help forecast how many of a specific cost item should be purchased based on the overall average unit cost without exceeding the budget or inventory space.

I am trying to have a Vlookup Macro to add all the prices for a certain product in different tabs.

VB:

Private Sub CommandButton1_Click() 'Generate Info Button

Dim ws As Worksheet

Dim ISSUEPRICE As Integer

Dim RESULT As Integer

Dim sheet As Worksheet

For Each ws In ThisWorkbook.Worksheets

[Code] ......

I have a sheet with a price list of papers and sizes. I then use this list to calculate the price of each order. It's a basic VLOOKUP and it returns the price. (this is the section outlined in blue on the demo).

However, i now want to add on another section so that if the order has Lamination (Gloss or Matt) this automatically adds on 20p or 25p respectively onto the sheet price. (table outlined in red but doesn't yet work).

I beleive it is because the formulas are not rounding the figures to the nearest 2 decimal points. so some costs are 1 or 2 pence out. OK on a small qty not so good on a large qty.

I dont know how to do this as the roundup function only rounds up i need it to round to the neareast 2 decimal points. Also dont know how to integrate it into existing formulas and macros

I have attached a sample spreadsheet for reference.

What I am trying to do is eliminate column 'J' on the Distribution tab. I want to use column 'C' on the Totals tab to calculate the subtotal based on matching the products on the Distribution tab in column 'E' with the Products list on the Totals tab in column 'A'. Once the match is made, I need to multiply the associated price in column 'C' on the Totals tab and the associated quantity in column 'F' on the Distribution tab with the result going in column 'K' on the Distribution tab.

I tried

=VLOOKUP(E:E,Totals!$A:$A,3,TRUE)*F:F

and

=SUMPRODUCT(SUMIF(E3,Totals!A3,F3)*Totals!C3)

but neither works and I do not know what else to try.

I have a security order list. This consist of several columns most important are

Column A Column B

Sec a 15,00

Sec b 14,50

Sec c 16,00

Sec a 15,10

Sec a 15,70

Sec b 16,70

Sec a 14,80

The first column gives the name of the security, the second column gives the bid price.

What I want is that I want to sort out all bid prices for a specific security. Vlookup works fine but again it just gives the first record. How can I get all bid prices for security a on a new worksheet without blank cells. If possible I would like to have it sorted as well.

I want to be able to calculate a price based on a given quantity. But here is the trick.

Example: Widget comes in cases of 12 at $1.00 per case. If the customer orders 36 widgets, then the cost is 36 x $1.00.

If item A is ordered in quantities less than "12" than there is a 15% upcharge.

Example: Widget comes in cases of 12 at $1.00 per case. If the customer orders 4 widgets then the price is 4 x $1.15

But, if the customer orders 35. Then the first 24 are calculated at 24 x $1.00 and the remaining 11 are calculated at 11 x $1.15.

I work with a broker that have an API function and all the prices goes directly to an Excel Sheet.

What I want is a way to keep track of this prices in a new sheet, as they change. Like a historical price.

Is there any way that excel can do it for me?

I am having a problem combining two databases. I have database E and F. I need to take any price that is $0.00 from Database E and replace it with the data from database F. The catch is that there isn’t always a price to replace it with. Also, there are parts in database E that do not appear at all in database F. Below is an example (there are about 20,000 lines of data total)

In the examples above I have placed both databases together. Column four has the database designation. As you can see the 1748 Hose reducer has a price for F but none for E.

Basically I need some formula like the following:

If (part number xxx) and (part number XXX) from column 1 are the same, replace the price data from E with the price data from F but only if E = $0.00

Is this possible?

I have an excel sheet that has a list of codes and next to each code there is a price list for that particular item.

What I am trying to do it: I have another workbook that I use to type up quotes. In this workbook there are 2 columns: one with the code for the item and then another with the price thereof.

What I'd like to do is when I enter the code of the part, I'd like the price to be referenced from the other workbook and be entered into the price column.

I need to do a price increase on an Excel spreadsheet. I need to increase existing prices by 10% and round up to next dollar. I am not sure to to accomplish this in one step on an entire column at one time. I can copy and paste the existing prices into another column and increase them by paste special multiply by 1.1 but not sure how to also roundup the prices.

I have enclosed a copy of one of the pages in the price list so you can see what I am attempting to do. As you can see I need to increase the prices in column D. Column E and F auto increase off of D so I do not need to do anything to those columns. ... Example.xlsx

I am filling out an order form. My values are being entered as sizes. I would like to caculate any entery as 1 X the amount of the item, but the entry is for example.. "YS" and not the number 1.

View 4 Replies View Related
Copyrights 2005-15 www.BigResource.com, All rights reserved