A Formula For Copying Prices With Exceptions
Dec 26, 2008
I am having a problem combining two databases. I have database E and F. I need to take any price that is $0.00 from Database E and replace it with the data from database F. The catch is that there isn’t always a price to replace it with. Also, there are parts in database E that do not appear at all in database F. Below is an example (there are about 20,000 lines of data total)
In the examples above I have placed both databases together. Column four has the database designation. As you can see the 1748 Hose reducer has a price for F but none for E.
Basically I need some formula like the following:
If (part number xxx) and (part number XXX) from column 1 are the same, replace the price data from E with the price data from F but only if E = $0.00
Is this possible?
View 9 Replies
ADVERTISEMENT
Nov 21, 2007
I have a sheet with a price list of papers and sizes. I then use this list to calculate the price of each order. It's a basic VLOOKUP and it returns the price. (this is the section outlined in blue on the demo).
However, i now want to add on another section so that if the order has Lamination (Gloss or Matt) this automatically adds on 20p or 25p respectively onto the sheet price. (table outlined in red but doesn't yet work).
View 10 Replies
View Related
Jan 17, 2009
I wanted to do a sheet for calculating prices for my work. I want to have 2 cells where in one I would type in manufacturer price and in other one I would get my price after markup. I have a list of price ranges that I don't know how to make a formula for. For example:
If price is $0-$74.99 than add $50
If price is $75-124.99 than add $75
If price is $125-174.99 than add $100
and so on til $7000
View 9 Replies
View Related
Mar 31, 2009
--------------------------------------------------------------------------------
Ok i have a formula that i use to convert bond prices, which are in 32nds to numbers that excel can understand. I use the formula:
=LEFT(F7,FIND("-",F7)-1)+SUBSTITUTE(RIGHT(F7,LEN(F7)-FIND("-",F7)),"+","")/IF(RIGHT(RIGHT(F7,LEN(F7)-FIND("-",F7)),1)="+",64,32)
This allows me to type 101-16 in and excel recognizes this as 101.5
My problem is that my data I am copying into the sheet is often in 1/8ths. So the price will come in as 101-272, which means 101-27 and 2/8 (or 1/4).
I admittedly dont understand this formula and just use. Can someone help me tweak it to recognize the third digit?
View 11 Replies
View Related
Feb 28, 2014
To establish the order for on duty personnel every month, I need to find a proper formula.
I have attached the workbook.
So, when I pick out a month from a drop list in cell A1, in column B returns (based on a formula) net work days of that month.
In range H:T, I have a table with the personnel names (in the header) and the individual holidays.
What I want is to have a formula in column C, that returns the name of the first available person (not on holiday in that day), in exactly the same order as it is in the table's header.
Attached File : ON DUTY.xlsm‎
View 5 Replies
View Related
Apr 7, 2009
I'm currently using a lookup table to determine programs to run on a machine, however I have 3 exceptions to this and can not get my code to work.
Currently the code looks at column D for the type, then column F for the thickness of material. It then calculates the etch time required using the rate (all shown as 1 currently) on the cal_sheet and then rounds this up to a whole number. This is then compared to a second table where the program details are listed against etch times.
View 7 Replies
View Related
Jul 23, 2009
I have a macro that loops through a column of text and removes all text after a hyphen. Example: AU9929-PK becomes AU9929. I need to set up some exceptions that when it processes certain text it does not truncate it. Example: AU9929-ASST stays as AU9929-ASST. So far there are twelve exceptions but this could increase.
Note: The list which includes shop number, description, sku, sku description, quantity, unit price and more is sorted in a particular order as other operations are performed on it that requires it be in a specific order.
View 4 Replies
View Related
Jan 20, 2010
I am using Excel 2007. I have a list of 100 names all ranked from 1-100. Is there a way to create a macro that can filter out the top 20, a specific name and also any names with the cell colours blue and yellow?
At the moment using an advanced filter based on criteria I can filter out the top 20 and the specific name I want but can't work out how to leave the coloured rows in as well.
View 3 Replies
View Related
Dec 15, 2009
I have a workbook (Data) that I am entering "job title" into column G. Based on key words in the job title I am then manually entering "level" into Column V.
I have created a worksheet (Level Matrix) that has the following
Column A = Job title
Column B - Level
Column C = Exceptions
What I have in column A are the key words - as an example *Director* (wildcard Director Wildcard); in column B is the word Director
What I want the system to do is look for the word DIRECTOR anyplace in the job title entered into Column G of the data worksheet (hence why I have the title between wildcards. IF it finds it then I want to add the level automatically (from Column B of the Level Matrix worksheet).
However if the compare finds any of the words in the title that match any of the words in the Exceptions Column (Column C of the Level Matrix) then I DO NOT WANT To autoload the Director level- it would load DNA. As an example- an Art Director would not load "Director" becasue the word "art" is one of the words in the exceptions column of the Level Matrix.
View 9 Replies
View Related
Aug 22, 2007
I need to create a custom sort which will cause entries "TBD" and blank to appear at the bottom of my spreadsheet. Any other value will be sorted alphabetically. I'm not sure how to create my sort list to do this. I tried "*, TBD " but this did not work.
View 2 Replies
View Related
Feb 12, 2014
I have a workbook with timesheet records for a list of resources from multiple locations. These resources have logged time against the projects which is captured on a monthly basis. These time records are against holidays declared by the company. I would like to see if there are any of them who have logged time incorrectly on a holiday.?
View 4 Replies
View Related
Aug 11, 2009
When using conditional formatting, I have it set to the following:
C2=60 (Reference Cell)
C3=5 (Reference Cell)
Conditional Format Settings
If C3 >= C2/12 then pattern set to Green
If C3 < C2/12 then pattern set to Red
Here is the problem - when you have a value in C3, everything is fine, it's either green or red. If C3 is blank, it defaults to green because the conditional format is true.
Is there anyway to add something in there to have no color when C3 is not populated?
View 11 Replies
View Related
Oct 2, 2008
List File Name with multiple exceptions. I have this
View 2 Replies
View Related
Oct 11, 2006
Basically I have the code to Delete All named ranges in active workbook, but I need it to skip over two named ranges called Categories and Length. Is there a way to adjust this to delete all named ranges in active workbook except a named range Categories and another called Length
Dim rName As Name
For Each rName In ActiveWorkbook.Names
rName.Delete
Next rName
View 2 Replies
View Related
Aug 14, 2007
I am calculating blood sugars for my daughter and putting them in a spreadsheet. The formula is simple:
Blood sugar - target blood sugar / 20 which yields the amount of insulin that she needs to take. I want this cell to be blank unless I enter a value in the cell above it.
Next, I take the value from that formula and add it to the amount of insulin that she takes for eating.
The value in the top formula can be 0 or less, but, if the value in the bottom one is less than 0, I want the cell to be blank.
View 9 Replies
View Related
Oct 26, 2007
I'm having problem with the ISBLANK function. I have attached my workbooks if someone would care to look at them. My macro basically loads two lists from other workbooks (old & new (attached)). It then finds out which entries are unique to each list, and places them in the EXCEPTIONS sheet.
Column C in these sheets should say TRUE or FALSE as to whether the corresponding cells in Column B are blank but it does not work. Book1.xls contains my macro.
Old.xls and New.xls will need to be selected when prompted.
View 3 Replies
View Related
Dec 15, 2008
I am looking at trying to do a complex rounding within Excel. I have a spreadsheet of all my product with my cost. I then convert to show what margin I want to sell my items at and then round to .99.
What I am looking at doing is getting my pricing more uniform so that instead of having 23.99, it is 24.99 or 20.99 it is 19.99. I want all the numbers in the ones' spot to round depending on a set parameter.
I have played around with if statements, but can not get it to work fully. Basically if the ONES number is 0 to 2 I want it to round down to 9.99 (ie first was 21.99 I want it to be 19.99) from 2.01 to 4.98 to round to 4.99 and then 5.00 to 9.98 round up to 9.99.
View 9 Replies
View Related
Sep 13, 2009
I have a spreadsheet with rows of entries that are listed by date. I would like to create anther worksheet where i can refer back to the other sheet and calculate the total prices per work week. Is there a way to do this using a function(s)?
View 14 Replies
View Related
Jul 24, 2008
how do i download historical stock prices for approx a hundred stocks i.e what code would suffice?
View 9 Replies
View Related
Feb 9, 2006
I have to update our ticker(US and Can stock) prices manually in our portfolio system.
I use www.bigcharts.com as our source . I can import the file in Excel. So what I would like to do is update the prices in Excel from the bigcharts.com. Not just today's prices but prices from previous day or two as well. Once I go to the website, I click historical quotes, then type in the stock symbol, and the date ,then write down the price.
Would Excel web query be the best way to approach this? If so, how would I import the the price for that particualr ticker for that date from the website into my excel?
View 9 Replies
View Related
Sep 15, 2007
Refer to the attached sample workbook,
(Keep in mind that there is an error in the sample workbook; Im not sure how to remove and re-attach the sample workbook as this is my first day on this forum.)
Cell F19 should contain =D19*B19
Column 1- These values will not change and represent price/cost of each UNIT
Column 2- "UNITS" the quantity or number of items at column1 value
Column 3- "$ AMT" the total cost of UNITS at that price/cost, i.e. Column1*Column2
Im looking for a way populate the values in Column2 when, "NUMBER OF UNITS" AND "AVERAGE COST PER UNIT" are changed
Ideally speaking, As few units in one row as possible to allow for a good mix.
For example: What i don't want is $9000*86 for 774k.
If it helps: "AVERAGE COST PER UNIT" will always be a whole number rounded up to the nearest 1000.
I believe a Most Even distribution of units will work fine.
After the distribution/population of fields in column2;
D29 must equal F3
F29 must equal F7
I'm looking for something that will populate the values in D12:D27 while adhering to the two conditions above. Even when the Input at F3 and F4 are changed.
The values in "UNITS" represent the number of a specific cost item in inventory when added together do not exceed the "TOTAL COST OF INVENTORY". Depending on store location, the "AVERAGE COST PER UNIT" and/or the "NUMBER OF UNITS" will change. It will be used to help forecast how many of a specific cost item should be purchased based on the overall average unit cost without exceeding the budget or inventory space.
View 9 Replies
View Related
Oct 16, 2012
I am trying to have a Vlookup Macro to add all the prices for a certain product in different tabs.
VB:
Private Sub CommandButton1_Click() 'Generate Info Button
Dim ws As Worksheet
Dim ISSUEPRICE As Integer
Dim RESULT As Integer
Dim sheet As Worksheet
For Each ws In ThisWorkbook.Worksheets
[Code] ......
View 3 Replies
View Related
Mar 5, 2009
I beleive it is because the formulas are not rounding the figures to the nearest 2 decimal points. so some costs are 1 or 2 pence out. OK on a small qty not so good on a large qty.
I dont know how to do this as the roundup function only rounds up i need it to round to the neareast 2 decimal points. Also dont know how to integrate it into existing formulas and macros
View 5 Replies
View Related
May 5, 2009
I have attached a sample spreadsheet for reference.
What I am trying to do is eliminate column 'J' on the Distribution tab. I want to use column 'C' on the Totals tab to calculate the subtotal based on matching the products on the Distribution tab in column 'E' with the Products list on the Totals tab in column 'A'. Once the match is made, I need to multiply the associated price in column 'C' on the Totals tab and the associated quantity in column 'F' on the Distribution tab with the result going in column 'K' on the Distribution tab.
I tried
=VLOOKUP(E:E,Totals!$A:$A,3,TRUE)*F:F
and
=SUMPRODUCT(SUMIF(E3,Totals!A3,F3)*Totals!C3)
but neither works and I do not know what else to try.
View 12 Replies
View Related
Jan 4, 2006
I have a security order list. This consist of several columns most important are
Column A Column B
Sec a 15,00
Sec b 14,50
Sec c 16,00
Sec a 15,10
Sec a 15,70
Sec b 16,70
Sec a 14,80
The first column gives the name of the security, the second column gives the bid price.
What I want is that I want to sort out all bid prices for a specific security. Vlookup works fine but again it just gives the first record. How can I get all bid prices for security a on a new worksheet without blank cells. If possible I would like to have it sorted as well.
View 11 Replies
View Related
Aug 29, 2006
I want to be able to calculate a price based on a given quantity. But here is the trick.
Example: Widget comes in cases of 12 at $1.00 per case. If the customer orders 36 widgets, then the cost is 36 x $1.00.
If item A is ordered in quantities less than "12" than there is a 15% upcharge.
Example: Widget comes in cases of 12 at $1.00 per case. If the customer orders 4 widgets then the price is 4 x $1.15
But, if the customer orders 35. Then the first 24 are calculated at 24 x $1.00 and the remaining 11 are calculated at 11 x $1.15.
View 14 Replies
View Related
Sep 30, 2013
I work with a broker that have an API function and all the prices goes directly to an Excel Sheet.
What I want is a way to keep track of this prices in a new sheet, as they change. Like a historical price.
Is there any way that excel can do it for me?
View 6 Replies
View Related
Dec 7, 2009
I have an excel sheet that has a list of codes and next to each code there is a price list for that particular item.
What I am trying to do it: I have another workbook that I use to type up quotes. In this workbook there are 2 columns: one with the code for the item and then another with the price thereof.
What I'd like to do is when I enter the code of the part, I'd like the price to be referenced from the other workbook and be entered into the price column.
View 9 Replies
View Related
Feb 12, 2010
i am trying to convert 100.50 to 100-16, agency mortgage price formats ...
View 9 Replies
View Related
Jan 6, 2014
I need to do a price increase on an Excel spreadsheet. I need to increase existing prices by 10% and round up to next dollar. I am not sure to to accomplish this in one step on an entire column at one time. I can copy and paste the existing prices into another column and increase them by paste special multiply by 1.1 but not sure how to also roundup the prices.
I have enclosed a copy of one of the pages in the price list so you can see what I am attempting to do. As you can see I need to increase the prices in column D. Column E and F auto increase off of D so I do not need to do anything to those columns. ... Example.xlsx
View 5 Replies
View Related
