I am trying to create a spreadsheet to keep track of an online racing league that I'm in. I have created columns for the racers, and rows for the races. What I would like to do is type in 1st, and it represent the number 13 for when I do an autosum at the bottom of that column. It would be easier for me to type in the position place, instead of the points value. The position place will always carry the name numeric value. Here is what I have so far:
I am creating a review sheet/skill matrix using excel and need to be able to convert a particular selection to a number in the adjacent cell to work out the users efficiency (long story that i wont bore you with)
So basically i have a question/statement in cell A and a drop down answer menu in cell B containing up to 5 possible answers (very poor, poor, ok, good, very good). In cell C i would like to insert a formula that allocates a number dependant on the selection in cell B. So if the user selects very poor in cell B cell C states 1, if cell B has poor selected then cell C states 2 etc etc
I have a spreadsheet where I want to record the VO2max value (a number indicating the maximum volume of oxygen a person can utilise) of a person.
The VO2max is just a number, normally between 30-60.
I then need excel to look up the VO2max value (i.e. “35”) and give that number a predetermined inputted value name in a different cell (i.e. “low” or “fair”, “good”, “very good” etc etc).
However, as VO2max is also affected by age and *** I also have a column for the participants age and *** and I want excel to use that to make the value name.
E.g. in a 24 year old male a VO2max of 32 is “low” But, in a 42 year old female a VO2max of 32 would need to be classed “”moderate”
Any ideas how this can be done? can it be done?
I could post the table containing the age range, values and names if I knew how to post an excel sheet on here.
I have two sheets, the first called 'AF' and the other called 'POR'. For one of the columns in the 'AF' sheet I used the following formula - VLOOKUP(B2,POR!$A$2:$A$111254,1,FALSE) to retrieve a string consisting of 7 numerical digits (Ex. 4678451). Now if I want this result of 7 digits in the same 'AF' sheet to be converted to the word "YES" - how do I achieve this? (All the 7 digits numbers are different or unique). Is there some sort of REPLACE command I use here or some other means?
I have a file with a lot of numbers, but one column with single digits. These digits have a cooresponding model name. I want to convert them all to their model name. There are only 4 model names. I tried a nested IF statement, but felt this wasn't working properly or was not the proper formula choice.
A Find/Replace would work, but it picks up the single digits elsewhere in the sheet. I realize i could copy/paste my column to a new sheet and from there convert/paste, but I am trying to get better at Excel.
I am importing a list of values from a text file. Some of the values have the letter "E" embedded in the string. For example one of the imported values is "29875E100". Excel is automatically converting this into scentific notation. Is there a way to avoid this?
I have to use data copied as text from a webpage. Some numbers stay with spaces so are recognized as text I think i.e. 3500 will be "3 500". I think there was a formula to convert that into number or any other way ? Couldn't find it on the forum so far :/
I get a dump that is in the form xxxx gbps or xxxx mbps (gigabits and megabits). I'd like to either use a formula or VBA code to convert this to mbps in another column.
I have an excel database where I register cases. I have in it a button that creates a folder with and ID nr that is in column A (I create new ID nr in the next row, when I press the button it will create a folder with that ID nr and inserts a blank word document in it). We have a template that we copy to the folder (depending what type of case). The idea would be that once the template is filled in and ready to print, It would take the values from the ID nr and a reference number a few cells to the right. Is it possible to tell excel to open the word document in the folder and create a PDF version with the ID nr and reference number. (there are only 2 templates, so the macro would have to look for one of the two in the folder) The names of the templates are: "Standard" and "Other". I guess the best way to start maybe this would be that I select the cell with the ID nr and then press a macro button to have this done. One thing that needs to be done, is to put a copy in the same folder and another in a second folder called "Binder" in my documents folder.
I have on the first tab a screen where you can fill in the name of the .doc or .pdf file.
That works fine, but now I would like that when I fill in a number and click on test, it opens te .doc and .pdf file that is attached for that number.
If you take a look at the pdf file you will see a second and a third tab.
First column is the number they need to fill in and the second column is the name of the .doc or .pdf that needs to be opened with that specific number.
How to link it and open both files for that specific number.
But not every number has a .doc as well as a .pdf.
I am currently trying to find an easy way to convert cell references to number format. The issue I'm having is when compiling a small formula (CONCATENATE) as part of a macro in order to produce a unique reference number to a column of data (1000's of cells long) I come accross the age old number stored as text issue after the macro has converted the formula to values.
Have tried editing the macro to number stored as text = false which removes the annoying little red triangle but the vlookup functions still wont read the values. My current solution is to highlight the entirity of the data and convert to number which takes a long long time as there are multiple lookups assigned to the cells, which for my current project is not acceptable.
Am looking for a quick solution, (with no interaction required) something that would convert the cells to the format required either before the formula is assigned and overwritten by values or just after. Currently I'm stumped.
I have a formula which extracts a number from a text string.
The text string is in A2 - the formula which extracts the number is in B2
However - when I copy the data in B2 and paste values to another sheet / cell - the forumla is as text - and I get the little green corner symbol and I have to convert to number.
Some VBA code - that will automatically convert my extracted "number" - to an actual number in number format.
I have copied from a website some data regarding steel weights, for example 1/16 .005 copies to one cell, when I try text to columns to separate the whole column and move the decimal .005 to the next column the 1/16 changes to 41290. The data copies quite well as HTML into Excel except for where a lone fraction value becomes a 5 digit number beginning with 41***. I can find no conversion calculator on the web to determine what's happening.
I have some values (I don't know the original format) that I have to convert into a numbers but I can't to that. I tried with value function, but #VALUE! error appear.
I tried with format cells but everything I do is useless. I tried to eliminate €, but the problems remain.
On my Excel spreadsheet, I have a TEXT value in A1 that is all numbers, i.e. "000065200". I would like to write some VBA code that changes A1 to the numeric value . How do I do this?
I am trying to compile data from several different managers within my company. They all have similar workbooks, and have been entering time in a number format. Currently they have values that look like this:
Excel - Book1___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD11.351.18 22.012.23 32.333.05 44.124.22 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
However, the data should appear as this:
Excel - Book1___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutD1=DEFG101:3501:18 202:0102:23 302:3303:05 404:1204:22 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
So, in any instance the period or decimal point should be a colon and the format of the cells should be in [m]:ss.
I want to be able to select a range within the workbook and run a macro that will convert the numbers into the "[m]:ss format.
on my Excel spreadsheet, I have a TEXT value in A1 that is all numbers, i.e. "000065200". I would like to write some VBA code that changes A1 to the numeric value .
I need to convert some text to a number. I was wondering if there is a way to do it in Excel. Like, for example, the date 3/14/2006 can be converted to 38790. Is there any function in Excel that can convert a word to a number?
Example would be (numbers are totally random)
md_bla_bla_02 would convert to something like 3452615261502
I have text amount in L55 column. The amount is auto summed amount. Example, $ 5081.16
Now in C59 column (total FOB) I have to write the amount in text manually. Any formula to make the amount converted in text automatically??? I badly need this. Attaching image.
THE Format of text amount has to be like below.
ex: FIVE THOUSAND EIGHTY ONE AND SIXTEEN CENTS ONLY.
It has to be caps locked, there will be and between cents and main amount, there wil be cents after that. Attaching image.
I am pulling out information from a cell using =RIGHT(C2,4). It gives me 6-2 in the cell, which is what I want. Now I want to sum the cell but how to do it. I have tried converting it but it doesn't work, I tried pulling out each digit, but that didn't work.
Ideally, I would like a formula that could convert cell A1 into a result in one cell.
I have an excel file that is used to create a large text file. This is all done manually so I wrote some code to create the file automatically. I have everything working except that I am losing some info. The info is zeros after the decimal point. Almost all of the cells are formatted as numbers with 3 decimal places. It is common to have values of 0.000 that end up just 0 when they are written to the text file. Is there a way to keep the formatting (all decimal places)? Here is an example of code that I am using to write data directly from a cell to the file.
field A1 & B1 are variable user input. The goal is to subtract B1 from A1, take the result and divide it by 176 (a fixed number) and display the result as minutes:sec.
For example:
A1 B1 14,000 (minus) 2,200 (= 11,800 /176 =) 67 I want to result (67) to display in field C1 as 01:07 (min:sec)
I tried (A1-B1)/176 and formatted C1 to be min:sec but the result displays as 5:27 I have no idea what that number represents.
I am using following formulae to convert 16 digit number to with validation that number is not exceeding 16 digits and should always start with "1" else it should give Error with 11 blank spaces
but when I input any number which has a value other than zero e.g. 1009510010000059 its returning result as 1009510010000050 I need validation also in the same formulae
