If Fill In A Number Open Word And PDF Doc That Is Attached To That Number
Jun 3, 2014
I have on the first tab a screen where you can fill in the name of the .doc or .pdf file.
That works fine, but now I would like that when I fill in a number and click on test, it opens te .doc and .pdf file that is attached for that number.
If you take a look at the pdf file you will see a second and a third tab.
First column is the number they need to fill in and the second column is the name of the .doc or .pdf that needs to be opened with that specific number.
How to link it and open both files for that specific number.
But not every number has a .doc as well as a .pdf.
I have an excel database where I register cases. I have in it a button that creates a folder with and ID nr that is in column A (I create new ID nr in the next row, when I press the button it will create a folder with that ID nr and inserts a blank word document in it). We have a template that we copy to the folder (depending what type of case). The idea would be that once the template is filled in and ready to print, It would take the values from the ID nr and a reference number a few cells to the right. Is it possible to tell excel to open the word document in the folder and create a PDF version with the ID nr and reference number. (there are only 2 templates, so the macro would have to look for one of the two in the folder) The names of the templates are: "Standard" and "Other". I guess the best way to start maybe this would be that I select the cell with the ID nr and then press a macro button to have this done. One thing that needs to be done, is to put a copy in the same folder and another in a second folder called "Binder" in my documents folder.
I have a pretty basic spreadsheet which requires a quantity and a unit price (which may change) and then the total. I find that if there is no number in the quantity cell, it reads it as if there is a "1" in there. Can anyone offer assistance on how to get around this without placing zero in that spot?
Have a spreadsheet that contains a column of 3 digit numbers as well as 3 digit numbers with 2 trailing alpha characters.
Example:
376 377 421 376AB 376XY 377NC 421GQ 421EF
Need to sort by this column, but, with the parameter of sorting first by the numeric only, and then by numeric with alphas. So, the above list would look like this sorted properly:
count if fuction on positive and negative number in the attached excel sheet. I would like to count how many numbers are positive and negative in the A column of the attached excel sheet.
I have a spreadsheet with multiple brands on it, and I've added an ActiveX listbox that allows you to select which brands you want to view (Brand A, Brand B, or "all brands"). It works great, however it appears that my macros are running on workbook open.
None of my macros (and there are several) have the "Workbook_Open" code in them, so I'm not sure what's going on?
It really doesn't do any harm, except that someone opening the workbook has to watch excel flash and blink and go through all of these steps/calculations evertime you open it.
I thought Excel might be treating the "workbook open" as me making a selection on one of my listboxes (even if it was already selected) and thus running that macro, but the same thing happens even if I save the workook to display a sheet that doesn't have a listbox.
ETA: From what I've read, activeX controls are always autoloaded when a workbook containing them opens. That's unfortunate. Am I out of luck here for a speedy workbook open?
I am creating a review sheet/skill matrix using excel and need to be able to convert a particular selection to a number in the adjacent cell to work out the users efficiency (long story that i wont bore you with)
So basically i have a question/statement in cell A and a drop down answer menu in cell B containing up to 5 possible answers (very poor, poor, ok, good, very good). In cell C i would like to insert a formula that allocates a number dependant on the selection in cell B. So if the user selects very poor in cell B cell C states 1, if cell B has poor selected then cell C states 2 etc etc
I am trying to create a spreadsheet to keep track of an online racing league that I'm in. I have created columns for the racers, and rows for the races. What I would like to do is type in 1st, and it represent the number 13 for when I do an autosum at the bottom of that column. It would be easier for me to type in the position place, instead of the points value. The position place will always carry the name numeric value. Here is what I have so far:
I have a column with codes coming after a # symbol and want to extract just the code from the cell. The code could be 2 or 4 characters in length. Some examples:
#AA abcdef
From this I would want the formula to return #AA.
#ABCD qwerty
From this, I would want the formula to return #ABCD.
The #Code should but may not always be the first word in the cell, so it needs to find the # symbol and then take the next x characters until a space is found. Note that the reason code may be the only text in the field, so a space may not be there at all. For instance,
#RR
Should just return the #RR.
Edit: This actually has become more complex now. The cell could be
#AA{text}
And for that, I would just want the #AA.
The formula would need to begin at the # and return just the next x capital letters.
Is there a function in excel that alerts you if you have entered a number (or word!) more than an agreed amount of times?? e.g. If you have agreed not to input the number 7 more than 3 times in a selected range, but then do so, will excel inform you??
write a macro that search first Row and if its finds the word "Date" then the whole column should select and change the Number formatting to Date, and if it finds the word "Time" it should change the formatting for the whole column to Time.
Below is the format of Table where it should change the formatting of Date, Start Time and End Time.
Is it possible for a macro to enter the number that is in Range("SYear") into A4, fill that number down 30 rows (31 total A4-A34), then add 1 to the number and put in the next 31 cells..repeat untill the number = Range("EYear"). For example if SYear = 2010 and EYear = 2012, I need 2010 in A4:A34, 2011 in A35:A65, & 2012 in A66:A96.
I have a spreadsheet where I want to record the VO2max value (a number indicating the maximum volume of oxygen a person can utilise) of a person.
The VO2max is just a number, normally between 30-60.
I then need excel to look up the VO2max value (i.e. “35”) and give that number a predetermined inputted value name in a different cell (i.e. “low” or “fair”, “good”, “very good” etc etc).
However, as VO2max is also affected by age and *** I also have a column for the participants age and *** and I want excel to use that to make the value name.
E.g. in a 24 year old male a VO2max of 32 is “low” But, in a 42 year old female a VO2max of 32 would need to be classed “”moderate”
Any ideas how this can be done? can it be done?
I could post the table containing the age range, values and names if I knew how to post an excel sheet on here.
The structure of my data (in each cell) is: Alpha Jan 13 35.00 Grams. So it is a record of an item (alpha in this cell), date (Jan 13), and number of grams. I need to find every cell that has this kind of record in a large data set, and after every occurrence of "Grams" I want to extract the number of grams. In this case 35.00. Note the place numbers are not equal. For example in another cell the record could be "Beta March 20 350.00 Grams".
I have a column that has almost 500 rows. Each cell has " DELETED", "OPEN" or "CLOSED" written in the cell. I need to know how to calculate how many times "OPEN" is listed throughout the column.
I have a macro that selects a range of about 20 columns and fills down. It works fine on my smaller set of data, but when I use one that has about 40,000 rows I get the error:
FillDown Method of Range Class Failed
It fills down about 7,000 rows, then fillsdown the first cell of the next row, but leaves the others blank. The entire range (including the nonfilled cells) is still selected.
I'm trying to make a table of the total amount of a liquid used throughout the day. Here is what I am trying to do: In cell D4, I want to be able to enter something similar to the following: 3cup+2bottle+1liter
and by doing so, Excel can automatically recognize that 1cup is 8oz, 1bottle is 17oz, and 1liter is 34 oz because of the reference chart provided on the side. Also, it would be able to notice the 3, 2, and 1 amounts so it would multiply accordingly so it would know to do this: (3*8)+(2*17)+(1*34)
and then put the calculated amount in the cell. The correct answer should be 92oz. Is there a way for Excel to recognize the conversions (i.e. whenever it sees 'cup' it will multiply by 8) and multiplication factors (i.e. 3, 2, 1)?Is there a formula I can enter that I can just "drag" down to the upcoming days in column D?
I know I can just do something like this: (3*G4)+(2*G5)+(1*G6).
I need to convert numbers to text in excel 2007. I have done it before in 2003, but can't seem to remember exactly what I used. I may have used some kind of conditional formatting, but not sure.
Here is an example of what I need.
If I type "7203" in a cell I want "Home Repairs" to appear. I have a list of words associated with a list of numbers and want to be able to type the number in a cell and have the word appear.
I'm trying to copy the content of a word document (File A) to another (File B) using Excel VBA. File A has about 100's of pages (not sure of the number as it varies) and this needs to be split to different files, each having 15 Pages.
Below is my code, where I'm able to select the content of the first Page and paste it in the target folder, but not sure how to determine the number of pages in word using excel VBA.
Note: Copying the content should be done, page wise only.
I am importing a data table from Excel into word. All works well except for the first column of my data, which contains numbers formatted as currency. I am using a bunch of loops to transfer the data into word, and for each cell the code looks like this:
[Code]....
Is there a way to tweak the code and preserve the formatting when I am importing numbers into word?
I tried the following code but it gives me type mismatch error:
I have a 2007 Excel spreadsheet (saved as .XLS) with worker names in column A and error types in column B. Column B can have multiple entries (which are sometimes duplicative of each other) separated by a hard return.
What I need to do is run tallies to determine the number of errors by type for each person, counting the value every time it appears, even if it is more than once in a particular cell. The ultimate goal is to generate a formula to track the number of occurrences for all error types types for the person in Column A (i.e. one formula each to track ABC's Procedural errors, ABC's Technical errors, ABC's Admin errors, DEF's Procedural, etc) though ideally I just need a formula to calculate any one of those and I can edit it to get the rest. Here's a sample screenshot:
The COUNTIFS formula is where I started but that only seems to count cells with the value as opposed to occurrences of the value. I did find this formula in my searches but it doesn't seem to work:
