For example i have workbook1,2&3, i want to copy the sheet(grade2&3) in workbook2&3 and paste to workbook1. But the data in workbook2&3 sheet(grade2&3) will automatically paste in workbook1 sheet(record grade 1 - grade 3) in column grade 2..
View 6 RepliesI use an excel time sheet for my employees and I am wanting to use a command button to copy data in a cell from worksheet1 to worksheet2. The cell that will be copied from worksheet1 will always be "S14". I want to copy that data to another worksheet and have it paste the data in the correct cell. The code needs to find the employees name in worksheet2 and paste the data in the next blank cell. Currently the command button I have works perfectly but I have to use the specific range, I would rather have the code seek out the employees name on worksheet2 so that I don't have to worry about specific row/column ranges. Is it possible? I'm sure it is. I have attached what worksheet2 looks like.
Rather than having to use .Range("A4:AA4") I would prefer to have the code find the employees name.
Attached file: Book1.xlsx
Any way to bypass the unprotect sheet in a shared work book, this is what i came up with so far
[Code] .....
Expanding this code to make it do the following:
1. Start w/ "RULE-Table" sheet,
2. Take note of "TODAY" date,
3. LOOKUP date in "RULE-table"
4. Locate Coordinates found in Col D of RULE-Table,
5. LOOKUP the data that resides in those Coordinates on the "PRODUCTION" sheet & COPY
6. PASTE data into "REPORT" tab C2 and E2.
Here's an example to visualize:
Code will do everything it needs to do within an Undisclosed OPEN file with several sheets. The reason the Workbook file name is undisclosed/undefined is because the file name will vary based on clients, so I don't want the code to be limited to look for a specific filename.
*The sheet names within this OPEN client file will always have the same names.
The sheet called: "RULE-Table" holds coordinates based upon "TODAY's" computer date.
For example: If today is JAN 4, the desired coordinates to pull data from are "B5" and "D10" from the "PRODUCTION" sheet.
"RULE-Table" sheet
A......B.........C................D.......
Row1.DAY....WK RANGE....QTR RANGE
2......1/1.......1...............B2,D7
3......1/2.......1...............B3,D8
4......1/3.......1...............B4,D9
5......1/4.......1...............B5,D10
6......1/5.......1...............B6,D11
Since today is 1/4, its rules say go to B2 and D10 of the PRODUCTION tab and collect the data
"PRODUCTION" (data source) sheet (within the same open file)
A.......B......C....D....E....F...
Row1..Header..Hdr..Hdr..Hdr..Hdr.
2.......2.................................
3.......14...............................
4.......13...............................
5.......20...............................
6.......62..............................
7....................76.................
8...................184................
9...................375................
10.................410................
11.................525...............
Last, the collected data from those 2 coordinates should always get pasted onto the "REPORT" tab into C2 and E2 in this example.
"REPORT" (destination) sheet (within the same open file)
A........B.........C.....D....E.....
Row1..Header..Hdr..Hdr..Hdr..
2...................20........410......
I have a macro code which gets the file list from a folder i specify and puts it in to an excel sheet as a column. I have then made a drop down list from this so the user can select the file they want.
From this file i wish to copy the data on a sheet that i specify. For example the sheet "dump" from file FR7_19.11.2009.xls (which will be a closed workbook) and paste its content in to the sheet "dump" in Summary.xls
I have a macro which opens up the closed workbook FR7_19.11.2009.xls and copies the sheet "dump" and then creates a new sheet of the same name and content in my current workbook (Summary.xls). However when i wish to select a different file to load in to Summary.xls "dump" the formulas i have been calculating information from this sheet all come up with #!Ref errors. I know this is because the macro i use deletes the old dump sheet before re adding a new one containing new data.
I am therefore looking for a macro which will simply just copy and paste the data from any file i select in to a sheet named "dump" as the data is always set out the same in every file but the values are different. I assume this will then mean that any formulas i use relating to this "dump" sheet in Summary.xls will work because the sheet is no longer being deleted and re-added the data within it has just simply been copied over.
I've created a chart in sheet 1 in a workbook. I want to copy and paste that chart into another sheet (lets take sheet 2) of the same workbook. I am using Excel 2010 version.
Whenever, I try to copy a graph and want to do "Paste Special as Link picture". The problem I am facing as "Paste Link" option is inactive.
I am attaching the Excel for your reference.
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
Copy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI've been doing various searches for past few hours and can't seem to find out if one its even possible, the closet I've found on here is to copy row to another workbook.
My question is I have one excel book called level1.xls and another excel book level2.xls, now in level1.xls I have a row of fields filled in and in level2.xls I have a blank form which for example I would like to try programme in VBA from the level2.xls file to click a button and open automatically level1.xls then grab field "A2" value from level1.xls and place it in level2.xls field "L4" then continue using level1.xls "B2" to level2.xls in field "C3" and then continue down when I add more values A3, A4 so on in level1.xls to the same field in level2.xls L4.
Steve.
How can i copy paste a set of data from a workbook to another workbook. for example i will copy cell D10:I10 of workbook1 to cell B2:F2 of workbook2.
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies View RelatedI'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedI have to gather a LOT of information from different files, into 1. To do so I want to automate this.
1. I will make a new, target file
2. I want to have a file with the macro in it
3. i want to open a (various) number of files to copy the info from
Now for my questions:
* How can I determine which other files are open (apart from the new and macro file)?
* How can I access each individual file, copy the information, paste it in the target file and close the "copy-file" after this
* Within the previous *): how can I determine how many worksheets there are in each file and do the copying sheets by sheet?
Need code that would copy range "A1:J1" to another workbook in the next available blank row.
Im trying to copy from one notebook to another and paste but to not paste over the information thats already there. I need to just paste my new info below whats already there. I have attempted this by filtering when I copy but its not working. My attempt is below. Right now Im filtering by column a but i need to be filtering by column c in the future.
ertyMerge()
ActiveSheet.Select
Range("a2:t65000").Select
Selection.Copy
Windows("Disc Pivots Template.xls").Activate
Sheets("Sheet1").Activate
Range("a1").Select
ActiveSheet.Paste
Sheets("Sheet1").Activate
Range("a1:t65000").Select
Selection.Copy.........................
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
I have a sheet named "Fittings Summary" with an export button. I need some code that will copy range A1:G38 of the fitting summary sheet then open a dialogue box asking for the following "Please Enter Tag No" once a tag number is entered I would like a new sheet to be created in the same workbook named with the tag no entered previously then the copied cells pasted into it. I would like to keep the formatting of the cells but not the formulas within.
View 10 Replies View RelatedI would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies View Relatedi want to copy a row from one sheet and paste it in another sheet based on a condition.
View 5 Replies View RelatedI have set up a workbook with sheets named for each month.
I have 70+ separate excel files (one for each month) that each have a single sheet I want to copy into the new workbook's corresponding month sheet.
Each file is named different but the name of the sheet in those files that I need will all be the same.
Is there a way I could sit in the sheet I want it pasted to, run a macro that I can point to the correct file/workbook -- preferably without opening -- and then have it copy the contents of the sheet I want (again, will always have the same sheet name).
I want the sheet copied with formatting and all, an exact copy.
This link seemed useful - if i could control which sheet it copies more easily since for me the source data always has a different file name. [URL] ........
I thought I lost that original message so I rewrote everything - differently - then I saw the restore button so I'm leaving both phrasings.
I would like to know if there is a Macro that could ask me which workbook to copy from, select the sheet in that workbook called CAP (sheet will always have the same name but I need to copy the sheet from 70 different files/workbooks) copy the whole sheet with formatting and all, and then paste it in my active sheet on the new workbook I am in.
I want to take data about a particular partner we have (CAP) out of the monthly summaries for the last ~72 months (which each have their own file/workbook) and put them all in one workbook just for this partner, on each sheet by month still.
I am only interested in automating everything I have to do for 1 month, but in a way that would easily let me do it again for the next month, and the next and the next, 70 times.
But a Macro would still be easier than opening each file, going to the sheet I want, copying everything, going back to my new workbook, pasting everything, closing the extra workbook, then doing that ALL again 70 times.
I need to paste a worksheet into a different workbook. Can I paste it over a different sheet? For instance, I want to take a sheet and paste it as "Old Data" (sheet name) into a different workbook. The code I am trying is:
View 2 Replies View RelatedI have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook
Copy range (c8,d69)
Close work sheet
Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
week 1 week 2 week 3 week 4
Product
quantity
cost
quantity
cost
cost
quantity
cost
1
2
3
4
5
6
7
8
I am coping form "SAC May'14 workfile" sheets "Top 20 FM" & "FM Major Inc&Dec" to "SAC Register Analysi Template" sheet "Top 20 FM" work perfectly but if i copy from e.g "SAC Feb'14 workfile, March'14 workfile" etc..
I have attached the file for ease of reference.
I'm trying to create an "export" feature where certain data can be copied out to a new workbook. I want to copy out the following from the current workbook to a new one: Sheets("1TR").Range("C33:M999") to range("A1") in the new workbook
and Sheets("1PL").Range("K33:K999") to range ("L1") in the new workbook.
The problem I'm having is that it is not just one copy/paste exercise, but two, and I don't know how to reference the new workbook as it doesn't have a filename.