Find Certain Text In Column And Then Replace All Similarities From Another Cell
Nov 6, 2013
I'm trying to find a function, or conditional format, that will allow to find certain text in a column and then replace all the similarities from another cell.
So basically, I have 3 Columns.
Redundant Text
Replacement Text
What The Text Currently Reads
Red Hats
Save On Red Hats Online
Black & Red Hats
Blue Jeans
Find Blue Men's Jeans
Blue Jeans On Sale
1) There is text that is recurring in the the thousands of the cells of Column 3.
2) I have used a program that found the recurring data, and put them in Column 1
3) Column 2 is what I want ever cell in Column 3 to change to when it matches the cell in Column 1
4) Is there a function that will find text in the 3rd Column that matches text in the 1st column (multiple cells in the 3rd column will match one cell in the 1st column)
5) Then Replace the text in the 3rd Column with the corresponding text in the 2nd column
View 2 Replies
ADVERTISEMENT
Apr 19, 2014
I am trying to use find and replace but the text that i'm searching for appears three times in the cell. I only need to replace the first occurrence in the cell. Alternatively, if there is a way to do this, can the second and third occurrence be changed?
Example:
Cheryl called Louie to advise she would be late for the meeting. Louie responded that he would meet Cheryl at her office. Cheryl confirmed.
I need to change the first 'Cheryl' to a job title and the second and third Cheryl to her initials (CL) so would read:
Manager of Aboriginal Affairs called Louie to advise she would be late for the meeting. Louie responded that he would meet CL at her office. CL confirmed.
View 9 Replies
View Related
Feb 5, 2014
[Code] .....
Trying to repeat a 550 or so character statement with a find/replace however I am getting type mismatch errors. When I use a smaller message in the "replace" it works.
I need it to post a message exactly as long as what I have in there. How do I get it to work?
View 6 Replies
View Related
Nov 24, 2008
I need to find the "x" in range C2:C44 and replace it with a value (variable) specified in cell I2
The catch is that I then need to be ablt to change that character when I2 changes.
Coloum C
*VER
*T’x’STATUS
*ON
*OFF
*T’x’BANDS
EG
I2 - Variable = B
*T’x’STATUS will become *T’B’STATUS
I2 - Variable = A
*T’x’STATUS will become *T’A’STATUS
But " *OFF " should not change.
I can change *T’x’STATUS to *T’B’STATUS but then I can change *T’B’STATUS to *T’A’STATUS
Please see attached example file as it shows it better than I can explain it.
View 11 Replies
View Related
Jan 7, 2014
I have an existing Cash Flow Report that has a column of abbreviated/shortened (WBS Element) title where each cell contains a unique three lettered/numbered amount of characters (Example: 200). These three abbreviated character cells are specific and relate to their full/longer (SAP WBS Element) title (Example: WBS DWRRI-BW066-200).
In my attached excel model (Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx), I need a formula for the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11 that will look at the abbreviated three lettered/numbered (WBS Element) titles in cells C3 thru C11, then search and recognize its unique counterpart contained in the, "SAP WBS Elements Export" sheet and return this full/longer (SAP WBS Element) title to the, "Cash Flow Report WBS Elements" sheet in cells B3 thru. B11, just to the left of its abbreviated/shortened (WBS Element) title.
View 3 Replies
View Related
Jan 7, 2014
I have an existing Cash Flow Report for my work that has a column of abbreviated/shortened (WBS Element) titles where each cell contains unique three lettered/numbered characters (Example: 200). These three abbreviated character cells are specific and relate to their full/longer (SAP WBS Elements) titles (Example: WBS DWRRI-BW066-200).
In my attached excel model (Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx), I need a formula for the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11 that will look at the abbreviated three lettered/numbered (WBS Element) titles in cells C3 thru C11, then search and recognize its unique counterpart contained in the, "SAP WBS Elements Export" sheet and return this full/longer (SAP WBA Element) title to the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11, just to the left of its abbreviated/shortened (WBS Element) title.
Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx
View 1 Replies
View Related
Aug 18, 2013
I am trying to find specific text throughout an excel document (2007) and replace it with the same text but in italics. I tried using the options/format function and selecting italics for the "replace" text but it replaces the entire cell text in italics instead.
View 5 Replies
View Related
Mar 18, 2009
I am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
View 2 Replies
View Related
Mar 4, 2014
I have a worksheet with several columns. I need a formula to search column D only and each time a specific location is identified to replace that location with alternate text. Example (ORIGNAL TEXT):
Column Dtext to text help.xlsx
BIRD
FISH
DOG
BAT
BUG
I need to search that listing and each time the word BIRD is mentioned have it replaced with FEATHERS and each time DOG is listed have it replaced with TAILS Final result would look like:
FEATHERS
FISH
TAILS
BAT
BUG
All other text should stay the same and replacement text should appear in the cell of the text it is replacing. This is a sheet used by multiple people several times a day and so the Find/Replace option really won't work.
Have working on this for at least 6 months and it just isn't going to happen for me. I thought I could use a Conditional format, but that is producing no results either.
View 3 Replies
View Related
Jan 31, 2013
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
View 2 Replies
View Related
Jul 15, 2014
developing a formula that will apply data from one cell to a block of text in another.
Here is what I need to do.
1. I want to insert the data in A1 of the attachment to the block of text in B1.
I can do this manually but I have to do this 10,000 times so I need a formula that I can apply.
View 8 Replies
View Related
Jan 6, 2009
I want to find strikethrough text and replace it with blanks. In my sheet there are cells that contain both strikethrough and normal text. I tried using the 'Find and replace' tool, specifying the format. I've attached a picture with the settings from the Replace window.
The problem is that Excel finds the cells that contain strikethrough text, but replaces with blank ALL the cell content. I would like to replace only the strikethrough text from the cell and leave the normal text as it is!
View 4 Replies
View Related
Jun 20, 2013
I work at a club. I've got a spreadsheet sent to me from another club we do business with. On it are charges from their club to ours that list the charge and associated member number.
I'm trying to use the text to columns feature to separate the member number from the other data in the column so I can sort by member number making it easier for us to bill our members.
Here is a sample of the data:
"Beach Club Bar,b500"
"Beach Club Bar,s200"
"Beach Club Bar,a150"
When I try to use text to columns what happens using the comma as a deliminator, everything including and after the comma disappears.
Thinking that maybe I needed a space between the comma and the member number (in the first line b500 is the member number) I tried to use find and replace to replace , with , and a space after it. This also resulted in all of the data including and after the comma disappearing. I'm sure I'm missing something here.
I tried copying the data into a separate spreadsheet. Tried changing it to text or general.
I typed in the exact data as you see it and tried the text to column function and it worked perfectly. What could be hidden in the data in that column that's causing this?
View 7 Replies
View Related
Jul 4, 2014
I have 4 columns in which is text combined with numbers (Lorem ipsum dolor sit amet t-shirt LPW01-B consectetur adipiscing.) I need to search every column and cells in them for a word/string which is written in R2 and replace the word in every cell by the word in S2
So for example, in R2 is "t-shirt" and in S2 is "potato"
The program finds the entry: "Lorem ipsum dolor sit amet t-shirt LPW01-B consectetur adipiscing." and replace it with "Lorem ipsum dolor sit amet potato LPW01-B consectetur adipiscing."
P.S.: I am having a trouble with uploading the file directy here, so here's a link: [URL]
View 3 Replies
View Related
Nov 11, 2011
I need some vba coding which will find and replace text on a worksheet. This would normally be straight-forward, however some text needs to be replaced by text which already occurs in the worksheet, and without it changing as well (if Find/Replace can perform two Find/Replaces at the same time???).
Here is the detail and what I am trying to accomplish: I have two worksheets each with a table of data.Worksheet 1 has a lookup table with three columns of data (column a and b are lists, with c being a formulated column which is dependent on the user selecting either column a name or column b name). I have done this easily enough using data validation on cell $C$1.Worksheet 2 has a user input table which column 3 is a dropdown validation using the named range "UsedName" from Worksheet 1.
I want the selected dropdown names to automatically change when the user changes Old Name to New Name (and vis-versa) on Worksheet 1.The list of values in the data validation dropdown list change well enough, but not any of the existing returned values. When I tried to use vba coding to Find & Replace, I run into issues because (Substanital and Important) are used in both instances, but at different levels with different matched names Important/Relevant.
Worksheet 1
A B C D
1 Cell with dropdown list New Names
2 (Old Names, New Names)
3
4 Old Names New Names Names Level
5 Equal Equivalent Equivalent 1
6 Dominant Critical Critical 2
7 Important Substantial Substantial 3
8 Substantial Major Major 4
9 Relevant Important Important 5
10 Minor Irrelevant Irrelevant 6
formula for column C =IF($C$1="Used Names", A5, B5)
column C is name ranged "Names
Worksheet 2
(Worksheet 2 has another table which has various data. One column which is a drop down list being pulled from Worksheet 1)
A B C D
1 Bob 25% Critical 19
2 Frank 60% Important 33
3 Ellen 40% Substantial 5
4 Ellen G 20% Substantial 12
5 Gary 55% Equivalent 100
6 Jo 50% Major 8
7 Peter 40% Important 22
8 Kim 12% Equivalent 30
9 Shelley 75% Substantial 15
10 John 75% Critical 90
so I want column C to automatically change from these New Names to the corresponding Old Name of the same level. So Critical would become Dominant, Important would become Relevant and Substantial would become Important.
View 7 Replies
View Related
Nov 5, 2009
I'm having this problem whereby a few cells in my work contain empty texts. An empty text is represented textually in VBA with a pair of double quotation marks with nothing inside (I think).
This means that the cells don't display anything visible, but are not blank/empty.
So what happens is that formulas such as ISBLANK(), COUNTA(), etc. are returning unexpected results.
View 9 Replies
View Related
Jan 23, 2008
I am trying to be able to input a value in column A and the string of text in column B will be affected by the value that I put in Column A. And i want to be able to do this with multiple rows with multiple values. Example:
My string of text in column B remains the same until the value of Column A changes. The find/replace will overwrite the "" in the string. This is my string of text in Column B: "^cCHT;all;;t;g;F1;F1;;all;;t;g;F2;F2;;all;;"
A1 value = "ABC"
Resulting Text in B1 = "^cCHT;all;;t;g;F1;F1ABC;;all;;t;g;F2;F2ABC;;all;;"
A2 value = "XYZ"
Resulting Text in B2 = "^cCHT;all;;t;g;F1;F1XYZ;;all;;t;g;F2;F2XYZ;;all;;"
I know that I can accomplish this by creating a button but I was wondering if there is a more automated way like a formula in a cell or something.
View 2 Replies
View Related
Sep 9, 2013
Here is the situation:
- Large block of text in one cell (1000+ words).
- I use the Find & Replace function (from the top menu) to find a specific word that may appear several times within the cell.
- Excel "highlights" the cell... but not the word specifically so I have to read all the text to find that word throughout the cell.
View 5 Replies
View Related
Jan 17, 2012
I have a query in a text file.
Select * from
table1 where
a = %d
and b in ('%d','%d')
and values in excel:
value1
value2
value3
I want to open the file and replace the first %d with value1 and second %d with value2 and third %d with value3.
So finally my output should be:
Select * from
table1 where
a = value1
and b in ('value2','value3')
View 9 Replies
View Related
Jul 16, 2013
I'm looking for some code to loop through some rows of text and then if the text contains / replace that with a space. My code is below:
Code:
do until intdemandrow = 1
If InStr(Range(cells(intdemandrow, 1).Value, "/") Then
replace(cells(intdemandrow, 1).value, "/", " ")
intdemandrow = intdemandrow - 1
end if
loop
View 4 Replies
View Related
May 10, 2007
I have a column of invoice numbers, formatted as text, some of which have first character "0" & last character "C" e.g. "012345C". I want to get rid of the "C" leaving e.g. "012345".
I have tried Find "C" / Replace " " with the undesirable result being that the leading "0" disappears too. Find "5C" replace "5" gives the same.
View 7 Replies
View Related
Dec 9, 2009
I'm wanting to use VBA to search down a column for a one dynamic value and replace all instances of that value in the column with a seperate dynamic value. My first attempt was this:
View 6 Replies
View Related
Sep 3, 2013
Column H contains alphanumeric data (codes).
I need a macro that renames all cells in column H starting with the letter "B" by replacing B with "Temp" and thereafter cuts the last two digits of the code. B224501 would thus be Temp2245.
View 2 Replies
View Related
May 30, 2009
I was wondering if it is possible to perform a find and replace which would replace data from another column. We have a lot of data fields of our inventory that we exported which we are trying to condense for another program.
Example: I have a description column (AV) that has [[Manufacturer]] within the description. We want to find [[Manufacturer]] and replace with our data column (DD).
This is the data that has our manufacturers name in it. We have several find and replaces to do within the description column besides the above field.
View 9 Replies
View Related
Apr 11, 2014
I have a excel which contains 5 columns in which 5th column data cells has to be replaced with another set of data which have relationship with other 4 columns data.
View 3 Replies
View Related
Oct 18, 2007
I am using the following vba code to find numeric codes in a column and replace them with the same code along with descriptive text:
Range("Q:Q").Select
Selection.Replace What:="11", Replacement:="11 - GSA"
Selection.Replace What:="10", Replacement:="10 - NYS OGS"
Selection.Replace What:="1", Replacement:=" 1 - Dist Sale"
Selection.Replace What:="2", Replacement:=" 2 - Direct Sale"
Selection.Replace What:="3", Replacement:=" 3 - No Sale: Warranty Exchange"
The problem as you might already see is that when the replacement of "1" happens, Excel will replace the 1 in the 10 and 11. Of course I want to only replace the number 1. Is there a better way to code this operation?
View 9 Replies
View Related
Nov 8, 2013
I'm evaluating the effectiveness of a keyword list we use to identify certain, high priorit,y medical situations from a string of text.
So, I have a column on a sheet of data (EIS Report!"B:B") in this case, and a seperate column on another sheet with keywords (Keywords!"A2:A47").
I use the formula ={OR(NOT(ISERROR(FIND(keywords!$A$2:$A$47,$B2))))} to identify if any of the keywords exist in the string.
This works well but I would like to improve my work in two ways:
1 - Identfiy, in another column on the EIS report sheet, which keyword it is that's been found within the string,
2 - On the keyword sheet, add another column of words, which if found within the string, would act as an exclusion.For example, I might use "STAB" as a keyword to look for "Male stabbed" etc, however might want to exclude "STABBING" to stop the solution triggering on "STABBING PAINS IN ABDO"
How might i adjust my formula?
View 9 Replies
View Related
Oct 1, 2012
I have an excel workbook where some sheets have a column called "Name" in Row 3. The column where "Name" appears shifts based upon other criteria so it's not set within 1 specific column.
The real data for the "Name" column starts in Row 5. Is it possible to create a macro that looks in Row 3 for "Name", then once it finds that column, it does a find and replace from Row 5 to the end of the data and replaces every space with a ^.
For example, if I have:
Row 3 Name
Row 4
Row 5 John Smith
Row 6 Jane Doe
Row 7 John Doe
Row 8 Jane Smith
I'd like the data to become:
Row 3 Name
Row 4
Row 5 John^Smith
Row 6 Jane^Doe
Row 7 John^Doe
Row 8 Jane^Smith
I'm using Excel 2010 if that impacts anything.
View 1 Replies
View Related
Sep 13, 2010
I need a macro that will look for a specific text string in the tab names of the workbook and replace it with a new specified text string (leaving the rest of the existing tab names). In other words, a simple find/replace but applied to all tab names in the workbook rather than cells. Ideally, I'd like it to pop up something and ask for the text to find and the text to replace it with, so I don't have to edit the macro itself each time I want to use it, but editing the macro each time is fine. Either way will be wonderful.
View 9 Replies
View Related
May 19, 2014
See attached image.
So what I am looking for is to put a macro behind button 1 which will do the following
Enter A Default Value Of 123 In The Yellow Boxes (B7:K7)
If They Are Blank When The User Clicks The Button
Performs A Search And Replace To Replace The Values 01-01-1990 With B8, 02-01-1990 With C8 Etc Until K8
Output The Contents Of Sheet 2 To A Text File (In XAI Format) In The Following Order A1:A100, B1:B100, C1:C100
[Code] .........
View 1 Replies
View Related
