I have the following table of stocks with corproate action types and dates with a ticker / identifier per stocA1:
Type
B1:
ID
C1:
Date
[Code]....
I am trying to find the NEXT Dividendcorporate action that is CLOSEST to the current date. I've done some google trawling and found a few formulae that seem to work only if the identifiers or dates are in a particular order. ALso having trouble using TWO criteria
I cells B5:B15 I have a list of dates from last year. I need a formula that I can put in cell D5 that gives me the date that is closest to the same day last year.
Example:
If today is 4/9/14
and
From B5:B15 there were the following dates: 3/12/13 3/19/13 3/29/13 4/5/13 4/8/13 4/12/13 5/6/13 5/29/13
Cell D5 would contain
4/8/13 since it is the date closet to same day last year.
I have a list with all our company cars (300). I also have a list with all the transactions of the fuel cards (12000 lines). Now I need the find for every company car (exact match) the nearest fuel-consumption-date (closest match to the given starting date) and take the mileage of that transaction. I've added an example. I have tried linking carnr and date (like carnr&"#"&date) and match these, but I don't always get the right car number.
I am trying to find the difference between two dates.
Column B consists of date (oldest to latest), Column C to Column P consists of data, I have entered formula in Column Q to get value if the conditions are met, else the cells will remain blank (but those cells contains formula)
For eg: =IF(C4395=1,J4395,"")
There are thousands of ROWS in the worksheet.
I need to find last value in the Column Q, corresponding date (assuming if the last value is in Q4395, I want it's corresponding date which is in Column B) and finding the difference between today and that found date. All these put together in one formula.
I managed to get last value in the column by using this formula, but I couldn't get it's corresponding date.
I have an excel workbook with 2 worksheets. One worksheet shows the MASTER LIST of COMPLETE Customer Names (e.g. ABB Supplies Incorporated). The other worksheet has information on customers but the customer names typed in are incomplete (e.g. ABC Supplies). I need a macro that would look do a comparison of the customer names in the 2nd worksheet to the Master List worksheet and pull the data (complete name, address, etc.) for those that would match (partial match since company name is 2nd worksheet is usually incomplete).
I may be making this more complicated than it needs to be but I can't seem to figure it out. The goal of this spreadsheet is for General Managers of a restaurant to give feedback about food deliveries. These deliveries usually come on Monday, Thursday, and Saturday, but could for a list of reasons come on any day of the week. I want to automatically populate as much information as possible without requiring GMs to remember and enter dates.
A1 is =TODAY() A2:A5 is a drop down where the GM selects the day of the week the delivery arrived. i.e. MON, TUE, WED, etc. I want the corresponding date of the past week to auto-populate in this cell (or even the adjacent cell if necessary) once the day is selected. For example, if today is 3/8/2014, when MON is selected in A2, I want the cell to automatically add "3/3/2014," making the entire cell read "MON 3/3/2014."
So if said GM is filling in this spreadsheet on a Saturday, and I want to display the date of the previous Monday, I need to find the day of the week of A1 (WEEKDAY function), and make A2 = A1-5.
If today is a Friday, it would be A2=A1-4, and so on for the 7 days of the week.
Then I would need to do all of this for if a Tuesday is selected in the drop down box, meaning IF(Saturday)Then A2=A1-4, etc...
I was trying to string together IF statements like this:
It works when I do only the first IF statement, but when I add another it returns #VALUE. I thought that excel would find the first true value and stop evaluating.
I have 2 different sets of data: temperature data recorded at meteo-stations defined by latitude / longitude, and major world cities also defined by latitude / longitude.
After the user chooses the station's coordinates, temperature data is pulled out from the first data set; this works! However, I would like to be able to provide information about the closest city to the chosen meteo-station from the second data set.
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday March 2, 2008Sunday March 3, 2008Monday March 4, 2008Tuesday March 5, 2008Wednesday ...................
My spreadsheet's column Z is a delivery date. When the workbook is started up (preferrably once per day, rather than each and every time you start it in a day), I would like to be able to loop through column Z, and if the date is today, toss the same row's columns A, D, and J on to `Summary`!A2:A?? (however many rows it needs), concatenated. I know I can do it easily with a for loop, but as I've learned, for loops tend to be really slow. Is there a quick or better way to do this than with a for loop?
I am trying to create a formula, but my knowledge of excel formulas is very new! I am trying do create an excel formula which calculates the difference in video view data which I enter, comparing today to yesterday to see the growth.
My column A is dates. My column B is video data.
Is there a way Excel can work out the TODAY date's data and minus YESTERDAY date's data to find the growth?
My thinking is that this would look something like the following, but I'm not sure how it would be written in Excel's formua:
Where Column A is = TODAY (), conduct sum where TODAY () minus data from yesterday (TODAY () -1).
-Find TODAY () - FInd TODAY'S associated data - Find YESTERDAY or TODAY -1 - FInd YESTERDAY'S associated data - Minus Yesterday from Today to find the difference.
I have a data table with monthly data in columns (65 rows deep), with the months (in format dd/mm/yyyy but showing as Dec 05) running across Row 4.
I want to be able to use OFFSET to identify the current and previous 5 months, in order to dynamically chart various items in the last 6 months worth of data.
The charting bit I'm okay with, and I realise I need to assign Names for this to work, but I'm struggling with the OFFSET & date combination.
I have the following but it starts from a defined reference cell;
I have made the macro that does as ,soon as i open the file, select today's date but only if date is in sheet5... sheet 5 is may so it works. Doing the same job for every sheet in the file.
I have found some excellent code that exports rows to individual sheets based on values in a column, and it works perfectly. I have found some code that deletes any rows that do not contain today's date:
VB:
Dim LR As Long, i As Long Application.ScreenUpdating = False LR = Range("O" & Rows.Count).End(xlUp).Row For i = LR To 1 Step -1 If Range("N" & i).Value < Date Then Rows(i).Delete 'N is column "Treatment Date" Next i Application.ScreenUpdating = True
But I'm having trouble adding this to the code I'm already using (that is working):
VB:
Sub Copy_To_Worksheets_2() 'Note: This macro use the function LastRow and SheetExists Dim My_Range As Range Dim FieldNum As Long Dim CalcMode As Long Dim ViewMode As Long Dim ws2 As Worksheet
[Code]...
I tried adding it after the code " ' delete columns (after exporting from Current Patients)" but I received the error "Compile error - Duplicate declaration in current scope" as it relates to Dim LR As Long.
I have attached my spreadsheet : Daily Treatment Summary.xlsm
I am working on payment/cost estimator and am looking for some ideas and formula or macro help. Basically what I am trying to do is set up a calculator where you would input the payment you could afford and it will tell you how much you can spend on the equipment. The problems I am running into are that when you factor in the interest rate and commission, the payments are round numbers so I need the formula to find the closest value. Example- $250 payment. The payments in the table w/ the interest rates are $158, $248 and $350. I would need it to pick the corresponding equipment cost for the $248 payment.
Make sense? If a macro would be easier I am fine with that, just have limited experience setting one up.
I need to find which number in a row would be closest to zero, then display the associated name. The number can be negative. I used this, which works well if all the numbers are positive: =INDEX($C$1:$E$1,MATCH(MIN(C66:E66),C66:E66,0)). I'm running into a problem when the closest number is negative.
In the attached sheet, I am using !Staff times columns N and O to nominate a mid point break time relevant to the start,lunch break and finish times of a shift.
What I would like to do is match the result to the closest time from !Race Times Column D (highlighted green). So if for example the mid point of the shift is 10:37 (as in !Staff Times cell N23), it actually comes back with the !Race Times result of 10:35 which is the closest actual race.
Ideally I would like it to look both sides of the midpoint time until it came to the closest match, rather than always looking at an earlier time, or always a later time (eg the cell N79 has a value of 11:36, however the 2 race times are 11:35 and 11:40. Preference is it shows 11:35). If however the N79 result was 11:38 or 11:39, I would prefer it went to 11:40).
However if this is not possible then picking the next time in either direction will do.
Say i had a col of random numbers, and their corresponding probabilities of occurring;
-32.33 0.001497
-35 0.001523
-32.06876 0.001551
-29 0.001579
10 0.001607
7 0.001636
-31.54628 0.001665
-18 0.001695
Neglect the nature of the sample, its just gibberish and not of concern here. The question is, if i enter a value in column C, how do i find the closest corresponding number to it in col A, and subsequently return its nearest corresponding probability from col B? For example, say i entered 8 in C1, then the formula would need to find the closest number to 8 in col A, which is 7, and return from col B the value of 0.001636.
I have data going in to a small table which has some empty rows as that data is not yet available... My problem is, I need to sort this table in date order but with the date nearest to today's date at the top...
The sort function puts oldest at the top or oldest at the bottom which is no good for what I need...
I needed to know how to find the closest match to a reference number regardless of whether its larger or smaller. I did a search and found a post back in March that said to use the following:
I applied it to my application and it works, I just have no idea why. Can anyone explain this formula to me or tell me where I can find a good resource.
I have a database where I have groups defined. For example, Parent 0001 is called Bag1. It contains an apple, orange, grape, and a pear. Parent 0002 is called Bag2, containing an apple, orange, and a peach. So on and so on...
Below is an illustration of what I explained above:
I need a way to input items that are in the groups and find the groups have all of the items or the group with the best match. I need to know if the match is 100% or if it is only a partial match.
The bag might have 2 items or it could have 20 items and they can be in any order.
I have modified some code I found in these forums that once I enter a value in a cell I can have it find the closest match to that value and scroll down the list and paste that value as an offset. The code works perfectly, but my data will often contain the same values repeated and these aren't duplicates and I need to know how to loop the code to ensure it doesn't just find the first value but also the second (if the first is already populated) Code is:
Sub findclose() Dim rng As Range, Dn As Range, Mx As Single, oAd As String Dim num As Range
Set num = ActiveSheet.Range("B1")
[Code] .......
---- What I need to do is insert a loop of some sort that basically says IF my offset cell has a value then to find the next closest amount and continue the macro.
So if my list was:
700 50 500 600 500
And I wanted to find 499 then my list would look like:
700 50 500 499 600 500
BUT if I wanted to match off another amount of 501 it would keep the 499 it found and then find the 501 making the completed list look like:
700 50 500 499 600 500 501
Right now the amounts are being overidden as I don't know how to loop it...
I have a sheet of pump test results, placed in rows, where the test rig is set at a specific speeds and flow and it records pressure. At each stage of the test a number of snapshots will be taken (Usually between 3-5 at each stage), so I have 3-5 rows of very similar data. I only need to use the best row from the selection available, so I am hoping to find a formula or code (Don't care which) that can look at the results and select the row of readings where the speed AND the flow are closest to the targetted data.
For example: In cells G6:G8 I have flow result values 0.129, 0.151, 0.156 and in H6:H8 I have speed result values 72.536, 71.82, 72.13. These are actuals. In cell N6 I have the target speed (75) and in O6 I have flow target (0.15), but these could be moved anywhere to suit really. What I was hoping to do, but am struggling big time, was to just flag up the row of readings where these two values are closest to the targets by placing a check mark in column L:L which I have formatted in monotype sorts and would like to place a "4" (Which gives me a check mark) on the 'best' row. From that I can do more with some simple IF statements.
Is this feasible, or am I trying to do something beyond Excels capability, it is certainly beyond mine at the moment. I was looking at the check mark method, but that is not essential, so if anyone has any suggestions on an alternative means of identifying the best row of data, that might make it easier to do, then I am listening.
I'm looking for a way to split a cell with text into two cells. The first cell can only contain up to 40 characters, the rest needs to go in the second cell. However, I don't want the text to be split in the middle of a word. So basically, if the text is in cell A1, I need to find the closest space to the left of position 40 in A1, and move anything to the right of this position to B1. Example:
Original text: A1: One green apple and a bucket of small onions that smell nice
I want to avoid this: A1: One green apple and a bucket of small on B1: ions that smell nice
I want to achieve this: A1: One green apple and a bucket of small B1: onions that smell nice