My spreadsheet's column Z is a delivery date. When the workbook is started up (preferrably once per day, rather than each and every time you start it in a day), I would like to be able to loop through column Z, and if the date is today, toss the same row's columns A, D, and J on to `Summary`!A2:A?? (however many rows it needs), concatenated. I know I can do it easily with a for loop, but as I've learned, for loops tend to be really slow. Is there a quick or better way to do this than with a for loop?
I am trying to create a formula, but my knowledge of excel formulas is very new! I am trying do create an excel formula which calculates the difference in video view data which I enter, comparing today to yesterday to see the growth.
My column A is dates. My column B is video data.
Is there a way Excel can work out the TODAY date's data and minus YESTERDAY date's data to find the growth?
My thinking is that this would look something like the following, but I'm not sure how it would be written in Excel's formua:
Where Column A is = TODAY (), conduct sum where TODAY () minus data from yesterday (TODAY () -1).
-Find TODAY () - FInd TODAY'S associated data - Find YESTERDAY or TODAY -1 - FInd YESTERDAY'S associated data - Minus Yesterday from Today to find the difference.
I have the following table of stocks with corproate action types and dates with a ticker / identifier per stocA1:
Type B1: ID C1: Date
[Code]....
I am trying to find the NEXT Dividendcorporate action that is CLOSEST to the current date. I've done some google trawling and found a few formulae that seem to work only if the identifiers or dates are in a particular order. ALso having trouble using TWO criteria
I want the 6 deliveries to take a proportion of each type (so we dont deliver all type 1 in the first delivery). But I want all deliveries to be full until there isnt enough stock left. So in the example above delivery 1 would be 360, delivery 2 would be 360, delivery 3 would be 266.
I need a formula (if possible) to disperse the types across each delivery but stop once enough stock is allocated to the deliveries.
The data consists of 2 columns essentially, Scheduled Delivery Date and Actual Delivery Date.
If the Delivery was made on time or early, I want to count it. I will do a similar count for Late as well.
Additionally, the user can enter the Scheduled date range they want to count early/on time deliveries from. There all also blanks in the Actual Delivery date column where deliveries have not been made (no actual).
Cells O3:O38 contain the Actual dates Cells N3:38 contain the Scheduled dates Cell B3 contains the begin date to start the range. Cell B4 contains the end date of the range.
I have tried using COUNTIFS and am having trouble getting the formula to work.
I know this will not work but I hope it shows the logic I want.Count range O3:O38 where values in O3:O38 are less than or equal to the corresponding cell value in N3:N38, for a range of N3:N38 that is greater than or equal to the date in B3 and less than or equal to the date in B4.
I'd heard that using FIND might make macros run faster than looping. Below is the code I'm currently using. There are two worksheets. The first has a column containing numbers and a blank column to insert the associated code. Sheet two has a list of unique numbers with the associated code. Presently I used a nested loop to populate the code column of the first sheet. As sheet 1 contains in the neighborhood of 25,000 rows it can take quite a long time to run using the loop
Option Explicit Sub BWRawCoding() Dim wb As Workbook Dim wsPT As Worksheet, wsAgg As Worksheet Dim RowsPT As Integer, RowsAgg As Integer Dim LoopPT As Integer, LoopAgg As Integer Set wb = ActiveWorkbook Set wsPT = wb.Worksheets("Graphical Data -RAW") Set wsAgg = wb.Worksheets("agg")
For LoopPT = 2 To RowsPT For LoopAgg = 2 To RowsAgg If wsPT.Cells(LoopPT, 6).Value = wsAgg.Cells(LoopAgg, 2).Value Then wsPT.Cells(LoopPT, 24).Value = wsAgg.Cells(LoopAgg, 1).Value End If Next LoopAgg Next LoopPT End Sub
I am trying to find the difference between two dates.
Column B consists of date (oldest to latest), Column C to Column P consists of data, I have entered formula in Column Q to get value if the conditions are met, else the cells will remain blank (but those cells contains formula)
For eg: =IF(C4395=1,J4395,"")
There are thousands of ROWS in the worksheet.
I need to find last value in the Column Q, corresponding date (assuming if the last value is in Q4395, I want it's corresponding date which is in Column B) and finding the difference between today and that found date. All these put together in one formula.
I managed to get last value in the column by using this formula, but I couldn't get it's corresponding date.
I am trying to provide a search string and then loop round searching for this search string until the beginning find cell is found again however I am having problems making my code work - here it is:
I have a set of data and I need to find the max for range 1-10, then 2-11, then 3-12 and so on. Is there away to do this using a loop. I'm new to vba and I've been trying but either it doesn't work or I get an error message.
The following macro searches Sheet1 for a value in a user defined textbox. When it finds the value it copies the row and and pastes the row in another sheet and then loops. My problem is i need to add a "do until" so that i will stop. I just don't know what code to add after the "until" to have it search the sheet once and then stop. Right now it will repeat infinitly. I need to know how to get it to stop once it looks through all the cells once. My current code is:
I cells B5:B15 I have a list of dates from last year. I need a formula that I can put in cell D5 that gives me the date that is closest to the same day last year.
Example:
If today is 4/9/14
and
From B5:B15 there were the following dates: 3/12/13 3/19/13 3/29/13 4/5/13 4/8/13 4/12/13 5/6/13 5/29/13
Cell D5 would contain
4/8/13 since it is the date closet to same day last year.
As a part of a much larger routine, I need a code to find five consequetive cells in a column with identical value "XYZ" and select the first one of them. Say,
I have a column: apples, pears, apples, oranges, xyz, oranges, xyz, xyz, xyz, apples, apples, apples, xyz, xyz, xyz, xyz, xyz, xyz, xyz, etc.
I need to select the twelfth cell in this column, highlighted red. I guess there could be some complicated if-then loop to go through the whole column, checking each cell and comparing it to the next four, but it would take forever to excecute... Is there some other way around? To find the first occurence of five xyz's one directly under another?
I've written a macro which searches the sheet for a value, when it finds the value it does something, then I want it to keep looping until it's done.
The issue is that Excel's find does not search first to last. Once it gets to the last, and you search next, it goes back to the beginning and finds the first cell.
In order to break out of the loop, I figured I should store the first cell found in a variable and then check inside my loop to see if I have got looped back to the beginning. If I got back to the first cell found, then I exit my loop and I'm done.
However, my code doesn't work. It exits the loop after a couple of iterations.
Sub Macro5() ' ' Macro2 Macro ' If WorksheetFunction.CountIf(Cells, "TEST") = 0 Then MsgBox ("Not Found") Exit Sub End If
to perform find, if match, ubdate, looping action in various sheets of excel through VB.
Currently, i am working at WAREHOUSE, where not having SAP OR ERP to perform [ maintain ] each & every in & out movement of products. However, i have been using excel to put in values for in & out manually....
What I'd like to know now is if there is a way to loop through a set of controls...I'll call that set 'A' and if the value "No Option" is found in one of A's controls, then a corresponding control in set 'B' is formatted as disabled and with a value of 'X'.
Ex. Control A1 = "Cat" Control B1 is enabled with no value
Control A2 = "Dog" Control B2 is enabled with no value
Control A3 = "No Option" Control B3 is disabled with a value of 'X'
Control A4 = "No Option" Control B4 is disabled with a value of 'X'
The code below shows where the wheels came off:
Option Explicit Const lGrey As Long = &H80000005 Const lGreen As Long = &HFF00& Dim BM1 As String Dim TextBox As Control Dim TextBox1 As Control
Private Sub UserForm_Activate() LoadOptionCriteriaData LoadFormat End Sub
I may be making this more complicated than it needs to be but I can't seem to figure it out. The goal of this spreadsheet is for General Managers of a restaurant to give feedback about food deliveries. These deliveries usually come on Monday, Thursday, and Saturday, but could for a list of reasons come on any day of the week. I want to automatically populate as much information as possible without requiring GMs to remember and enter dates.
A1 is =TODAY() A2:A5 is a drop down where the GM selects the day of the week the delivery arrived. i.e. MON, TUE, WED, etc. I want the corresponding date of the past week to auto-populate in this cell (or even the adjacent cell if necessary) once the day is selected. For example, if today is 3/8/2014, when MON is selected in A2, I want the cell to automatically add "3/3/2014," making the entire cell read "MON 3/3/2014."
So if said GM is filling in this spreadsheet on a Saturday, and I want to display the date of the previous Monday, I need to find the day of the week of A1 (WEEKDAY function), and make A2 = A1-5.
If today is a Friday, it would be A2=A1-4, and so on for the 7 days of the week.
Then I would need to do all of this for if a Tuesday is selected in the drop down box, meaning IF(Saturday)Then A2=A1-4, etc...
I was trying to string together IF statements like this:
It works when I do only the first IF statement, but when I add another it returns #VALUE. I thought that excel would find the first true value and stop evaluating.
I have modified some code I found in these forums that once I enter a value in a cell I can have it find the closest match to that value and scroll down the list and paste that value as an offset. The code works perfectly, but my data will often contain the same values repeated and these aren't duplicates and I need to know how to loop the code to ensure it doesn't just find the first value but also the second (if the first is already populated) Code is:
Sub findclose() Dim rng As Range, Dn As Range, Mx As Single, oAd As String Dim num As Range
Set num = ActiveSheet.Range("B1")
[Code] .......
---- What I need to do is insert a loop of some sort that basically says IF my offset cell has a value then to find the next closest amount and continue the macro.
So if my list was:
700 50 500 600 500
And I wanted to find 499 then my list would look like:
700 50 500 499 600 500
BUT if I wanted to match off another amount of 501 it would keep the 499 it found and then find the 501 making the completed list look like:
700 50 500 499 600 500 501
Right now the amounts are being overidden as I don't know how to loop it...
Excel 2007 I have a spreadsheet of file boxes the keeps a log of boxes, contents, locations and shred dates. Currently figuring out when and which boxes can be shredded is a manual hunt, find, and then deal with it. I can use CF and Sorting but I have been looking at some search type functions to return a list meeting the requirements and trying to step my way towards that.
1st attempt. Was find out how many boxes meet the shred (before today) that have not already been detroyed. Column K is the Shred Date, D1 is Todays date, Column G is Status. Got this working good.
My failed attempt came at trying to find the earliest shred date excluding those that have been destroyed. This is not really neeed but I was hoping it would get me closer to creating the list of boxes that meet shred that have not already been destroyed.
Note: Column A is the Box No. and the spreadsheet contains blanks as we continue to add file boxes to storage.
Below array formula find the highest box number used by each department.
I would like to create a list of boxes including Column A "Box no.", Column H "Location", Column K "Shred Date" for any box whose shred date is before today that has not aleady been labeled "Destroyed" in Column G.
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday March 2, 2008Sunday March 3, 2008Monday March 4, 2008Tuesday March 5, 2008Wednesday ...................
I have made the macro that does as ,soon as i open the file, select today's date but only if date is in sheet5... sheet 5 is may so it works. Doing the same job for every sheet in the file.
trying to get macro to loop until there's no data to process.I have data in two columns A&B which it creates a chart from I then need it to skip C (which is blank) and do the same chart for columns D&E and so on indefinitely until there is no data to process..
I have attached a very simplified version of the data, the data is made up so the charts don't make sense but if you run the macro you'll see what I'm trying to achieve.
I need add a new worksheet that outputs sheet name and box 7 data for each sheet onto a master spreadsheet. I have been playing around some code but adding a third loop is a bit of nightmare and not ideal so I've just output to msgbox for testing per. Would application.match be better to use than the 'is like'?
I want to use a piece of VBA to copy values from cells A1, C1, E1, and G1 and paste them into the next blank cell in an existing range called "DCopy". I am trying to use the following code, but as I have never tried writing a looping macro, have no idea what I am doing:
Question: I have a VBA code that transpose every 7th row of a dataset in column A only, however I would like for the code to extend the transpose to (7 row and 3 cloumn).
