I'm having issues with finding anything on the loop that I'm going to need to run.
I need to open each xls file in a directory with a date in 2007. Inside of each file I need to copy a cell and paste that number into a new workbook in cell A1
Then close the first file, open the second, copy the cell and paste the data into A2. I would need this loop to continue until all files have been opened and had the data copied.
I am trying to find the first empty cell in a column to paste values. I have read the FAQ and searched the forums but every solution seems to fail me! I have tried the ...xlup, xldown, loops, For , IF statements, etc. to no avail.
My column has the first Four Rows empty with some Header rows in Row 6. I want to paste starting on Row 7. The most success I have had is finding the first empty cell and pasting a value but every subsequent attempt to find the next empty cell and paste a value just keeps pasting on the same cell found in the first attempt. Below is my most recent attempt. I am using MS-Office 2003 (or is there some special worksheet setting that prevents this from working?)
Sub My_Finder()
Dim cP1 As Range
Dim M As Integer
Dim Task As Range
Dim MyRange As Range
Worksheets("Weeks2").Activate
I have a worksheet with a various data in column B.
1/ I want to search column B one row at a time looking for a string value of 'Town'.
2/ When the first row containing this string is found select a left 35 chars substring of the value in the column C and copy this down in column A if the value in Column B = '0000/00' UNTIL the string value of 'Town' changes
3/ Repeat 2/ until the last instance of 'Town' has been processed.
4/ Column A will have some empty cells where Town has not been populated. These rows should be deleted and replaced with one empty row between each change of Town value
3/ Continue pasting this string value into each successive row
I have a range of cells which I wish to print to a .txt document. However, I would like these cells to stay aligned, one on top of the other. I am currently doing that by finding the cell with the widest piece of data for each column, and storing the width that each column needs to be to an array of integers. Then, when printing out the range, I simply add spaces to each piece of data its width is the same as the max column width. I am finding the max column width using the following loop:
'find the width for each column and store in col_width()
For cur_col = 1 To total_cols
'skip the tag switches column
If cur_col <> 3 Then
max_data_width = 0
For cur_row = 1 To total_rows
cell_data_width = Len(Find_String_Diagnostics(diagnostic_range.Cells(cur_row, cur_col)))
If cell_data_width > max_data_width Then.................
I need to run this on all cells in column a not just A2...:
Dim ie As Object
Set ie = CreateObject("internetexplorer.application")
Dim srchtrm As String
srchtrm = Range("A2").Value
ie.Visible = True
ie.Navigate "http://myurl.com=" & srchtrm
I also need to add to this code an option for finding text on the particular URL before the cycle is completed and looped to the next cell.
I have a very long routine, looping through 35,000-ish rows several times to detect and delete unwanted items. Occasionally, it gets locked into an endless loop and CTRL+Break will not stop it - I have to kill Excel through the Task Manager.
How can I find out where the endless loop is so I can detect what's causingit and fix it?
With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long
[Code]....
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies View RelatedI have been trying to write two formulas in one cell. I have been able to write them both separately but have been unable to join them both together. What I am trying to do if first search name them how many reoccurring numbers appear. I have provided an example below
a b c d
1 Tom 333
2 Sam 22
3 Sam 22
4 John 5
5 Sam 22
6 Sam 1
7 Tom 3
8 Tom 333
So the answer would be
Tom = 2
Sam = 2
John = 1
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.
For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)
text
1
text
text
[Code]....
For Each loop can be instructed to loop starting the bottom of the range. I know that a For To Loop can handle looping from the bottom up,
Sub Filterout()
Dim c As Range
Dim rng As Range
Dim i As Long
Dim lrow As Long
Dim counter As Integer
lrow = Cells(Rows.Count, 3).End(xlUp).Row
Set rng = Range("c2:c36")
For Each c In rng
If Left(c.Value, 1) "~~" Then
c.EntireRow.Delete
End If
Next c
i have a problem with a nested loop:
it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.
am i doing something wrong?
dan
==========================================================
Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster.
==========================================================
Sub new2()
Dim Org_Area As Variant
Dim Item As Variant
Dim Copy_To1 As Variant
Dim Cell_Ref As Variant
r = 1 ..................
Can't seem to figure out why my Do Loop keeps giving me an Error of "Loop without Do".
View 14 Replies View RelatedI have got a loop which is working fine but now i need another loop which will run till the end but need to repeat itself as soon the column x become 1 the highest number would be 3
here is my main loop A1 = 5000
and second loop need to run inside the this loop
Sheet1.Activate
i = Range("A1")
For b = 1 To i
If Cells(1 + b, 3).Value = "P" Then
Cells(1 + b, 29).Value = 1
Else
If Cells(1 + b, 3).Value = "S" Then
Cells(1 + b, 29).Value = 2
Else
If Cells(1 + b, 3).Value = "C" Then
Cells(1 + b, 29).Value = 3
End If
End If
End If
Next b
I have loops working in other loops. The macro is almsot working well. It does the calculation i want but it fails to stop a loop, because of that, the macro can't run the next main loop (c), which is to move to the next cell where the calculations must be run.
I attach a file. the troubleshooting macroation is Sub Itiration.
The code of this macro are bellow. Basically, the loop using d as counter run into an endless loop. I don't how to stop this loop without affecting the results which are calculated correctly.
Sub Itiration()
Dim CurCell As Object
Dim TempSum As Double
Dim d As Integer
For c = 3 To Cells(3, 4)
If Cells(11, c) > 0 Then
For i = 1 To Cells(10, c)
Do
Going through a loop, I am trying to load pictures into an image box (or alternatively into a label) one by one i.e. going through the loop the first time, I want to load picture 1, then on the second loop, picture 2 and so on. A bit like an automated slide show.
I have written a simple loop and have used the loadpicture function to load the picture into the image box. When the code runs, the image box only gets populated after the last run through the loop. I have tried using application.screen updating function and the image.activate function without success. It is a simple bit of code and I expect an easy problem to solve if you know excel vba well.
My code below goes into an infinite loop, with culprit line shown in bold and underline...
View 4 Replies View RelatedI am parsing 15,000 files from a network server. The files are all the same format and length. The problem is that the first few iterations of my loop run fairly quickly, 7 to 9 seconds a case, but after only 300 iterations I'm up to 60 seconds a case. How do I keep the last iteration running as fast as the first iteration? I've included the main loop of my parsing routine below.
Sub Fill_Summary_Tabs() 'fills out the Datapack and JMP tabs
Application. ScreenUpdating = False 'turn off screen updating for speed
Call PrepImporterTab 'formats the Importer Tab so that everything runs smoothly < 1 second
Dim fs
Set fs = CreateObject("Scripting.FileSystemObject") 'part of the filename test
For N = StartingCase To EndingCase '***** Start of the Parsing Loop *****
Sheets("Setup"). Cells(20 + N, 1).Value = Time 'Print the start time of each case....................
I have sheet with rows and column from cell(1,1) to Cell(8,18) and it has #N/A inside these data. Is there a way to use Find function to find #N/A and replace it with empty space?
View 11 Replies View RelatedI am working on a macro that has a VLookup in it.
The sheet that this will be applied to comes in weekly and can have anywhere from 10K to 30K.
I want the VLookup equation to be able to find the last possible row with data in column A and then copy the Vlookp equation in column B to the last row.
Can someone please provide the correct code that will allow me to do this?
What formula will return the the first value to the right?
For example: A1=empty cell, B1=3, C1=empty cell, D1=0, E1=5, F1=empty cell.
What does the formula need to be in G1 to return the value of the first cell to the left than contains 0 or a value, or in this case 5 (E1).
In my code I have a very useful line:
[other code stuff here]...Range("J" & Rows.Count).End(xlUp))
That helps me find the value in the last row that actually has data in my spreadsheet. This is great, but I want to try to accomplish the same thing without vba. In other words, in cell A3, I always want the value that is in the J column, but the last row that has data. (In other words sometimes the last data row ia 97, sometimes it is 23.) Since the value is always changing this won't be vlookup. Is there another excel function that can find the end without the use of vba?
This might seem goofy to need to do since I already know how I can in vba, but in my (admittedly pathetic code) I keep have an endless loop and if I can figure out a way to get this value on the ss.
I need to find, using VBA, three highest numbers out of entire column (L), select 13 appropriate ranges like for L9 - A9:M9 , for L8 - A8:M8 and for L7 - A7:M7 and copy to a different sheet.
View 9 Replies View RelatedBook1.xlsx
I have two sheets of data and two tables (1=finial 2=data comparison) I am trying to figure out some kind of formula or vba that can easily tell me that the location point in table one data comparison matches the location in table two. The VPMDFS (location footage) in table two or NDE data can be a range, say vpmdfs.NDE + or - 3 ft. so the ILI or source record should fall in between this range. Once the match has been made I need to copy and paste that record onto sheet one all in the same row. I have been scratching my head and researching for weeks and cannot come up with a simple solution. My problem with all the scenarios that I've tried is the formulas what the data in the data comparison sheet to already be in the same row. Please reference my attached work book for examples.
How to find a particular cell value, example: i have sheet and in that we have 30 employee names and i need to map the data of work from home, which is in dark bule color and need to make a total of it. rather than counting the all the sheet details from month start till end. I need to find it in a quick shot.
I would like to prepare a shift schedule for 3 months it should be a automated.