Loop Through Cells And Ranges Reverse Order With Backwards Loop
Aug 30, 2006
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
'Code here to delete a row based on criteria
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
we would use a byte data type as a counter in a For Loop, but just today I have been having trouble with this. When I try to count backwards with " Step -1" I get an "error 6: overflow" on the FOR LOOP line. When I count forwards it works fine.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
I am using stuff from loops http://www.ozgrid.com/VBA/control-loop.htm to loop through all the controls on a UserForm. But I can't find a way of controlling the order in which this is done. I tried both TabIndex and moving the controls around without success. Is there a property of a control that controls the loop order.
With Sheets("regrade pharm_standalone") For Each r In .Range("standaloneTerritory") If r.Value = "X101" Then r.EntireRow.Copy Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues End If Next r End With ------------------- I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
I'm trying to speed up my work in excel. I need to fill some cells in first range to get + values in 2nd range. Loop seems to be best way for it, but i'm not to good in VBA. In attached file you can find 3rd worksheet. Loop must go thru all cells in range B25:AN32 and change related cells in range B15:AN22 until cell value in bottom range will be > 0.
There is also 2nd problem I'd like to solve. In sheet KANBAN I've got simillar situation, but now i need to paste text into green range, to get values in bottom range until.
Both loops must run from top to bottom, column by column.
Iím getting data from query. My data has fields: Item No, Customer ID & Sales rep. I need to find out for each Item number which customer put order and who was the sales rep. (Excel 2002). see file attached.
I have a table sorted on column A. I need a macro to go row by row on that list and stop when the NAME (column A) is changed, in this example 3 first rows "aa". then I need to define the range of these 3 rows (A2:D4) in the table and make some subroutine. After finishing with this range I need the macro to continue and find the next rows with the same name, define the Range and go to the subroutine (in my example A5:D5)
The next range will be A6:D7 and so on until last range A27:D27. How can it be done?
I tried some CASE, FOR NEXT, DO UNTIL loops to do this but get stuck.
DATA *ABCD1NAMEDATEALERTTEST 2aa10HB3aa20INR4aa41WBC5ww50ELE6zz30DIG7zz61HYD8dd21CRE9dd41PLT10dd60HB11dd71INR1 2rr10WBC13tt20ELE14tt41DIG15yy40HYD16uu51CRE17ii20PLT18ii31HB19ii51INR20ii70WBC21ii80 ELE22oo20DIG23ll11HYD24ll20CRE25ll30PLT26mm21HB27nn30INR
I have this piece of code which just copies every 3rd cell in column B from sheet1 and pastes it going down column A in sheet2. This works fine for me.
Code: Sub Macro1() Dim FirstCopy As Integer Dim FirstPaste As Integer FirstPaste = 1 For FirstCopy = 1 To Range("B" & Rows.Count).End(xlUp).Row Step 3 If Range("B" & FirstCopy) "" Then Range("B" & FirstCopy).Select Selection.Copy
However, now I want to copy every third cell from columns B, D, and F in sheet1 and paste them going down columns A, B, and C in sheet2. When I run the code below I am receiving this error: "Compile error: Wrong number of arguments or invalid property assignment"
Sub Macro1() Dim FirstCopy As Integer Dim FirstPaste As Integer FirstPaste = 1 For FirstCopy = 1 To Range("B" & Rows.Count).End(xlUp).Row Step 3
I'm trying to define some ranges with a loop but being a newbie at VBA I'm finding it difficult to solve the error in the code. First, as the data area is uncertain (variation in the number of rows and columns) i look to the end of the entire data area. Then i want to define intervals of 250 rows with a 30 row difference between each of them. Here is my
i am trying to write a macro to loop through a column of data, creating a named range each time it encounters a certain string. so, it inititially finds the first instance of the string, then finds the next instance, offsets one row back and then names that as the first named range. how do i get it to actually loop through the column until the end of the data?
I can get the first range named but can't figure how to get a loop into my macro to repaeat the process.
Code: Sub x() Dim rngTemp As Range Dim rngFind As Range Dim rngFirst As Range Dim rngLast As Range Dim nom As Range Dim strFirstAddress As String
I have a report that contains several rows of data. This data is separated by page breaks, so for example, there could be 1500 rows, separated into 90 pages by page breaks. Each range may have anywhere between 35 and 45 rows, but some of those rows may contain no data.
I would like to loop through the cells column A, look for a certain criteria, then delete the range around that certain cell that is contained within the page breaks.
I have code that will loop through the cells in column A. I also managed to create code that will delete a set range but since the ranges aren't always a uniform number of rows I need another fix.
I have a list of several hundred columns, beginning with column "G:G", with varying numbers of rows of data in column - each row dipicting a monthly data point. I'd like to average the numbers in each column (need to average over the appropraite time-frame) and compare that average with the corresponding average (same time-frame) for benchmark (column"F:F"). The problem is I don't have the same number of data points in each column; some have data points for every month for the past 33 years, and some just a few years; almost all have differing beginning and ending dates as well.
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro() Dim lastRow As Long Dim i As Long
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code: for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row) if x = y then *storedRow = rowNum end if next rowNum *
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop() ' ' Loop through an indexed number of worksheets; _ ' & this ensures that the worksheet range is dynamic _ ' and is able to adjust when new sheets are added/removed, etc. ' 'Dim ws As Worksheet Dim i As Long Dim ws As Worksheet
loop that can calculate the median of dynamic ranges. I need to run through all columns and for each column find the the ranges (there are more ranges and they are seperated with a blank row) with numerical data and then calculate the median and thereafter continue down to find the next range with numerical data in that row and so on.
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.
For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)
it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.
am i doing something wrong?
dan ========================================================== Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster. ==========================================================
Dim Org_Area As Variant Dim Item As Variant Dim Copy_To1 As Variant Dim Cell_Ref As Variant