I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.
For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)
With Sheets("regrade pharm_standalone") For Each r In .Range("standaloneTerritory") If r.Value = "X101" Then r.EntireRow.Copy Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues End If Next r End With ------------------- I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
I have a sheet where I want the contents of row G (where it has contents) to copy itself to the corresponding row in column A until the code has gone right through column G. The first such item is in row 1383 column G and occurs randomly down the rest of the spreadsheet. I've tried writing this but it doesn't do anything.
Here is the code:
Sub Loop1() Application.Goto Reference:="R1383C1"
Do ActiveCell.FormulaR1C1 = "=(RC[6])" Selection.Copy
When I run the following code, I get "Run-time error '1004': Application-defined or object-defined error"...most of the time. Sometimes it will work when I don't pass any variables to the function, and insert a raw number for the variable "counter". But it still gives me the error most of the time.
Sub WriteLatLongs(counter) 'counter Dim j As Integer Dim toprow As Integer Dim bottomrow As Integer For j = 1 To counter toprow = (((j - 1) * 250) + 1) bottomrow = (j * 250) Sheets("PixelCoord"). Range(Cells(toprow, 2), Cells(bottomrow, 3)).Select Selection.Copy Sheets(j).Range("B7").PasteSpecial Paste:=xlValues, Transpose:=True Next j Sheets("Sheet1").Select ActiveWindow.SelectedSheets.Delete Sheets("PixelCoords").Select ActiveWindow.SelectedSheets.Delete End Sub
The error highlights the following line: Sheets("PixelCoord").Range(Cells(toprow, 2), Cells(bottomrow, 3)).Select.
I have a worksheet with a various data in column B.
1/ I want to search column B one row at a time looking for a string value of 'Town'.
2/ When the first row containing this string is found select a left 35 chars substring of the value in the column C and copy this down in column A if the value in Column B = '0000/00' UNTIL the string value of 'Town' changes
3/ Repeat 2/ until the last instance of 'Town' has been processed.
4/ Column A will have some empty cells where Town has not been populated. These rows should be deleted and replaced with one empty row between each change of Town value
3/ Continue pasting this string value into each successive row
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro() Dim lastRow As Long Dim i As Long
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code: for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row) if x = y then *storedRow = rowNum end if next rowNum *
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range Dim TotalRows As Long TotalRows = Cells(Rows.Count, 1).End(xlUp).Row For Each CELL In Range("C1", "C" & TotalRows) CELL.Select 'Code here to delete a row based on criteria Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop() ' ' Loop through an indexed number of worksheets; _ ' & this ensures that the worksheet range is dynamic _ ' and is able to adjust when new sheets are added/removed, etc. ' 'Dim ws As Worksheet Dim i As Long Dim ws As Worksheet
how can I get this to begin pasting in column 2, row 2?
For i = 0 To Me.ListBox2.ListCount - 1 Set MyCol = MyTitle.Find(what:=Me.ListBox2.List(i, 0), MatchCase:=False) MyCol.EntireColumn.Copy wbk.Sheets(1).Cells(1, i + 1) Next i
I have a number of workbooks which contain 62 tabs each. I need a macro that copies specific information from each tab and pastes it to a summary table which will be uplaoded to an access database. I created a macro that works when I manually click on each tab and run the macro. I then added a loop to try and automate. when I run the macro, it loops through all of the tabs, but it only copies and pastes from the first tab, resulting in 62 line items fron the 1st tab. I need to know how to set the active tab to which ever tab the loop is on.
What I need is the code for a loop which copies a formula from cells E1 and E2 and then pastes it, staring at C7 and then every 32 cells down until row 20000.
The formula attached here is in cell J4. I pulled this formula down to J26. Then copy J4:J26 and paste to M2:M26, P2:P26, until CG2:CG26. I need 26 times to paste to the range. There are even 4 columns distance between two pasting range.
How can write a For Loop to copy and paste to these ranges?
I have a worksheet ("Issues Report"). Based on the value in column A, I'm trying to cut the entire row and paste it on another worksheet ("Closed Issues").
Here's what I've written so far:
Dim C As Range Dim xlSheet As Worksheet Set xlSheet = Worksheets("Issues Report") Set C = xlSheet.Range("A:A")
With xlSheet For Each cell In C If cell.Value = "Ready to Close" Then ActiveCell.EntireRow.Select Selection.Cut Worksheets("Closed Issues").Range("A65536").Select Selection.End(xlUp).Paste End If Next cell
This seems logical to me, but it's not working as planned. The code gets hung up on the 11th line of code.
I want to copy range B2:B5 value only and paste it 19 times from B12:B15, B17:B20, B22:B25, and on. The distance between any two pasted range is tow rows.
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
I have a financial model (attached) which calculates the final cash flows (in a calculation sheet named 9.Operations, rows 428 to 437) for a particular plot. However,the model has a list of 17 plots in the input sheet (3.Input-Plot Details). The macro must change the plot number in the 9.Operations sheet(cell G11), re-calculate the final cash flows and paste all the final cash flows for 1 to 17 plots in a single separate sheet consecutively.
I am trying to use a code to run a loop and search in column B for a certain name and if it finds it I want it to then look at column P and if it finds that the result in column B is less than $1000 then I want it to cut the entire row and paste the row in another sheet. Here is the code.
I've attached below a small part of my code. I am wondering if there is a way to do this, without copying and pasting something 30 times, but using a loop instead. As you can see there are a series of productsNumbers (30 in total, but this example is for 3). Each productNumber is a string that is actually a 5 digit number, so it can be an integer as well, if it has to.
I would like to code below to loop for as many products as there may be. The way that I have it right now does not work - I feel that I am missing something small or that there is no way to do this.
I have an excel worksheet that has data in columns BA:CX. I want VBA to cut the data from the last row in the worksheet BA:CX and paste the data in the row below it's current location starting with column C:AY. I want to repeat the process for the next row up, etc. all the way until I get to BA:CX in row 2.
Finding the value "OK" in a range of data in Worksheet(1) out of Range("Product"). Ones the value "OK" is found, the entire row is cut and then pasted into a new worksheet 'Range("A3")'. Then the loop sets in and finds the next value "OK" in the range untill it reaches the end of the predetermined Range("Product").
The only problem I have is that the code I have written already performs the process, but when pasting the data into the new worksheet, paste's all of the found rows into the same row. So what you are left with in the new pasting sheet (Worksheet2), is only the last found row because it keeps overiding previously found data. What I need the Macro to do is find the next availible blank row in Worksheet2 and for all values cut out of Worksheet1. Now there was a simular posting to this on the forum, but when I tried it in my code it would not work...
Sub FindAndPaste1() With Worksheets(1).Range("Product") Set c = .Find("OK", LookIn:=xlValues) If Not c Is Nothing Then firstAddress = c.Address Do c.EntireRow.Cut Destination:=Worksheets("Sheet2").Range("A3") Set c = .FindNext(c) Loop While Not c Is Nothing And c.Address <> firstAddress End If End With End Sub
I also attach the Excel spreadsheet called Product Macro.xls
I want to make a vba (macro) for excel that will look at the column to the left of an active cell and if there is a formula there drag it over to the right into the active cell and if there is not a formula there copy and paste value of what is in the active cell into itself deleting any formulas that may have been there. on top of that if the cell to the left of the active cell has no boarding I need to copy it and paste format to active cell. I need it to continue a number of times to be decided in cell A1 and just go down the column doing this. Please help, I know it sounds hard but I need it for 10,000's of lines of code and really cant do it by hand ...
Dim UltFila As Long, i As Integer, k As Integer UltFila = Range("A65536").End(xlUp).Row k = 2 For i = UltFila To 2 Step -1 If Cells(i, 2) = 4102 Then Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1) End If If Cells(i, 2) = 4104 Then Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1) End If ..................
VB: Sub CopyNextTab() WorkbookName = ActiveWorkbook.Name Cells.Select
[Code]....
I'm not entirely sure if this is correct, but what I'm looking to do is the following:
1. On the currently selected sheet, copy all data into the "Pasted Data" sheet on "Test.xlsm" 2. On the "Calculations sheet", copy all information across to the next available row on "Master Sheet" 3. Select the original Workbook and move to the next tab 4. Repeat until there are no more tabs remaining
So far as I can tell steps 1-3 are working (however I'm not entirely confident with my code to move to the next sheet as I'm not sure it will end the sub on the last sheet).
I'm trying to use a VBA Macro to copy and paste a row of cells from 14 worksheets into in another worksheet in a Colum. The worksheets are entitled Data 1, Data 2, Data 3 and so on until Data 14 and the worksheet that I want to paste the data to is entitled sheet 1. The row of data that I want to copy and paste is in the same place on each worksheet C4 - IR4. I can do this using the Macro recorder but there is a lot of code and ultimately I want this to be part of a much bigger Macro once I get better at figuring this stuff out.
I have read that this can be done by using a Do Until and then using a loop. By the way I am using Excel 2003 with XP.
1) Select/Copy rows 1 thru 35 of column C from "Start" tab. 2) Special Paste/transpose them in row 2 of "Finish" tab (1st 35 columns in row 2 should fill up). 3) Go back to "Start" tab, move exactly three rows down from bottom of previous selection in column C and copy the next 35 rows (rows 38 thru 72 in column C). 4) Again return to "Finish" tab, and special paste/transpose in next row down (row 3 in this case). 5) Continue to repeat this action until all rows of data in column C have been copied and transposed/pasted from "Start" tab to "Finish" tab. Variable number of rows on "Start" tab.
