I need to compare 2 cell with 1 specification reference.But the function can't give return value as per required.Both 2 input cells using Data Validation List.
Please refer attachment for some examples : matching.xlsx
I have the following function in cell (table 2 column C) where I want to find a contact name from my table TMI if 3 criteria are true (client, account, NAM) For each contact I have 1 true combination of client/account/NAM but for each client/account/Nam I can have several contacts.
{=OFFSET(TMI[[#Headers],[Contact]],MATCH(1,(TMI[Client]=$B$1)*(TMI[NAM]=C3)*(TMI[Account]=B3),0),,COUNTIFS(TMI[Client],$B$1,TMI[Account],B3,TMI[NAM],C3),1)}
The function is working well but shows only the first contact name if I have 3 contacts for the same client/account/NAM. (I pressed Ctrl+Shift+Enter)
When I press F9 on the function, it shows all the contact names! so they are somewhere.
Hence, I have copied and pasted this function into data validation / list in the source but it came up with an erreur.
Table TMI:
A B C DClient
Account
NAM
Contact
Comments
[Code]..
Table with offset function:
A B C D
Chi
Account
NAM
Contact name
Comments
[Code]..
All client, NAM and account lists are dynamic !
Is it possible to set up a cell to either return a vlookup result or allow a specific data validation list? For example, if precedent cell is blank, then I want to perform a vlookup and return result, but if not, then only allow a choice from an unrelated list.
View 5 Replies View RelatedI have the following formula in a Data Validation List:
=OFFSET(B8,MATCH(J2,
(CHOOSE(B7,D1Array,D2Array,D3array,D4Array,D5Array,D6Array)),0),1,COUNTIF(CHOOSE(B7,D1Array,D2Array, D3array,D4Array,D5Array,D6Array),J2),1)
In B8 it is the formula =VLOOKUP(B7,LookupTable,2,0). and the lookup array is this 1$H$112$J$113$L$114$N$115$P$116$R$11
So the value returned in B8 will be a the start reference for the OFFSET function. This works but it retuns blank values and not the values in the arrays.
I am using a data-validation-list with =INDIRECT(B7) as the source. It works as expected except for after the file has been closed and reopened. When it is reopened, the source is changed to =INDIRECT(#REF!).
I have tried =INDIRECT('Worksheetname'!B7) but same result.
There is a range of quarters and relevant dates like from and till - means if you have 1 Q 2009 => it means from 01.01.09 till 31.03.09. I would like to have following in my excel. There is a validation for selecting Q from list, once you select Q, there is LOOKUP function displaying from and till dates. But however it's not working, in same cases it's working, but in most cases the from/till period is not relevant to selected quarter.
View 2 Replies View RelatedI have a log that I have data validations on.
Column C validates on a list called "Division"
Column D is supposed to validate based on the selection in Column C, and give the list based on Column C.
I had it working awhile ago, then I went and changed the lists. Now, the lists are not validating appropriately (I'm not getting the expected drop down in D based on the selected in C) and I don't know why its not working anymore.
For some reason my data validation cell is not working when I first open up the spreadsheet.
I have to go to data validation, open it and just hit ok, then I am able to use my drop down list.
My data is this
"=OFFSET(name,MATCH(LEFT(B2,LEN(B2)),LEFT(address,LEN(B2)),0),0,SUMPRODUCT(--(LEFT(address,LEN(B2))=B2)),1)"
I have a data validation list does nothing upon start up (not working). The formula is:
=OFFSET(E$1:E$5,MATCH(C94,LEFT($B$3:$B$87,LEN(C94)),0)+2,0)
If I go into data validation and just click OK (leave formula as is), it starts working again, but the next time I start up the same thing happens.
I'm trying to add code to validate the format in which users are entering in a date within my userform, and I am also trying to validate if they enter in a specific value within a combobox, they will be unable to enter data within a textbox further down in the userform. Here is how my code is currently written, but neither my date or data validations are working. I have bolded the new coding I added to an existing code that was created by someone else at my job prior to it being given to me.
[code]
Private Sub cmdAdd_Click()
Dim lRow As Long
Dim lPart As Long
[Code].....
I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.
i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list
First Name
Surname
Paul
Smith
Paul
Jones
Tony
Phillips
I have a tracking sheet... in that I got in column C say "priority" there I have a drop down list date say P1, P2, P3
Now I need to restrict that if a user enters a data in the C2 and trying to enter a data in D2 leaving the drop down list data blank in C2. A error message saying "pls select priority forst" etc...
I got the following solution from moderator:
You can apply the Custom Data Validation formula =LEN(C2)>0 to D2, making sure that Ignore Blank is unchecked.
It works but, when I enter something in that cell it gives the error message and when I click OK or Cancel it just ignore the conditions and leave the data what ever I entered and moves further.
I have a dynamic validation list (see attached) which will not accept the indirect function as a formula in the listbox.
Using the named range on its own works fine, but using the indirect generates an error.
Is it possible to use the HYPERLINK function inside of a validation list?
Presently I have a dynamically named range on another worksheet that includes a hyperlinked term. When I attempt to create a validation list using this named range the term appears in the list without the hyperlink.
I can't seem to find a way to make a data validation list automatically show the first item in the list rather than showing blank.
View 10 Replies View RelatedI'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create
Name: Fruit
Refers to:
banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
View 5 Replies View RelatedI have a List of Different Fruits in Cells A1 to A5
Apple
Banana
Orange
Strawberry
Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
dear....can i set width in list box data validation (width in cell i set short).thanks
View 9 Replies View Relatedis there a way to force so that a cell value can be only of what a validation droplist offers, hence users can not enter their own values and have to use the droplist for cell content selection.
View 2 Replies View RelatedI am using Data Validation on some fields to create a drop down list from a named range! These fields however allow you to enter values that are not in the list.
Is there a way to make the cell have to be an entry from the data validation list?
i know it is possible for a selection in a drop down box to determine another field using the INDIRECT function in validation
eg - 1st drop down box - Football, Rugby, Cricket
2nd drop down box (if chosen football) - displays list of football teams
2nd drop down box (if chosen rugby) - displays list of rugbyteams
2nd drop down box (if chosen cricket) - displays list of cricket teams
but is it possible for the 1st drop down box to determine what is available in a range of other drop downs?
eg - 1st drop down box - Football, Rugby, Cricket
2nd drop down box (if chosen football) - displays list of football teams
3rd drop down box (if chosen Man Utd) - displays list of Man Utd players
See attached. I cannot get my indirect function to work in Cell K2 based on cell J2
Data for the Validation is in cells W1 to AC14
I want to do data validation in Column K based on Column J, but cannot get the indirect function to work to past into the data validation tool
I have named all my ranges.
AM Call Log.xlsm
I have a data validation on a cluster of Cells that has a name.range = "match". On clicking on a Cell in Row 61 belonging to range = "match" i get a Data Validation|Custom formula(Alt+A+V+V) "=J61>=0"
now how can i convert this function of Data Validation to a Vba script.
To be Exact what i need is....
If a value is entered in cell belonging to range.name = "match"
then check the value in "corresponding row" of the column J.
If Value is greater than J
then stop vba script and show message box.
If value is not greater than J then run desird Code.
I hope the following picture might clear things even more of what im looking for..
I'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
The idea is to create a liquor order sheet which takes items and prices from a liquor inventory workbook, which is part of the same file. i'm sure that you can do it all fancy with a macro, but unfortunately i'm not super experienced with excel. so i helped myself with what i know a bit -> drop down lists. I created an extra sheet which has 4 ranges on there... the liquor type (liquor, beer, wine), and the 3 sub classes for each type (red/white/blush/sparkling for wine, draft/import for beer and so on and so forth). On the inventory i named the range of all white wines "white", of all red wines "red" ..
On my order sheet i created a drop down list for type and created 2 more via "indirect" .. so when you select "wine" in the first one, the 2nd one will ask you for white/red/blush/sparkling and the last drop down then for the exact item according to the range on the inventory.
Hope what i did so far is understandable ^.^
Now my problem is that i want the unit cost to be copied when an item is selected. So you select "beer" in A1, "import" in A2, "corona" in A3... and the price for corona (which is written in a cell on the inventory sheet) should show up in A4.
I attached a screen of the inventory sheet so that you can see how it is structured.
Hello, could some one please help me with the following:
I have created a drop-down list for the range : C3:C65000 using Excel 2003 and Windows XP Pro. I did this using Excel's Data Validation Tool. The settings I used are as follows:
Allow: List
Source: =GROUPS
Check Box Ignore Blank is Ticked
Check Box In-cell dropdown is Ticked
GROUPS = GROUPS!$A$2:$A$29
Now all this works well, such that when I click in the cell range : C3:C65000, then a dropdown list appears - showing a list of all my groups.
However, when I click on any of the dropdown lists in this range, the width of the dropdown list is only as wide as the column. Column C has a width of 20.
What I need please is for the dropdown list to be as wide as the list of information showing in the dropdown list. If some one could please explain on how I can achieve this - that would be great.
I have a workbook that uses data validation from a list.
The same list is used in several of the individual sheets.
Can one use just one list for different sheets, as I'm having to create separate list for each sheet, which when an overall change needs to be made it is easy to miss one.
I want to load the actual data exist in the rows by selection value from the data validation list.
E.g I have two worksheet in one excel file. One has a data activities of persons with their name like two columns i have in which one exist the name of person and second exist the activities which they perform.
On the second sheet, i made a data validation list of all the person names
Now my requirement is, when i select a person name from the list, load all the data from the 1st sheet to second sheet. Is this possible without VB code, because I want to share it on the Google sheet with my boss, where VB sheet is not supposed to work.
=IF(WEEKDAY(D3,2)=7,"WEEKEND",IF(WEEKDAY(D3,2)=6,"WEEKDEND",IF(TODAY()=D3,"TODAY",IF(TODAY()-3=D3,"FRIDAY","ERROR"))))
how can i use the data cell validation using the above function logic?