=IF(WEEKDAY(D3,2)=7,"WEEKEND",IF(WEEKDAY(D3,2)=6,"WEEKDEND",IF(TODAY()=D3,"TODAY",IF(TODAY()-3=D3,"FRIDAY","ERROR"))))
how can i use the data cell validation using the above function logic?
I'm trying to figure a to enforce dual data validation on a single cell. That is, I need to restrict the user to entering only a decimal value, only if a particular other cell (say A2) is blank. To put it another way, if A2 is blank, the user can enter a decimal value, but if A2 is not blank, the user cannot enter anything. I can use Data Validation to enforce either the decimal restriction or the ISBLANK, but I'm not sure how to make them work together.
View 2 Replies View RelatedI use a large function when ranking numbers in an array each month. I'm only interested in the top 5 numbers. However, there are occasions when the top 5 numbers contain a tie. How do you build into a large function, logic to handle a tie. Here's my function, which is very simple:
Code:
=LARGE(C$6:C$40,1)
=LARGE(C$6:C$40,2)
ETC.
I'm trying to have three different possible results from one formula based on one cell.
If A1 is greater than 10 I want B1 show 5, AND if A1 is less than -10 I want B1 to show -5, AND if A1 is between 9 and -9 I want B1 to show the value of A1/2.
I've never used logic functions in excel before.
I am creating a macro that will be copying values from one worksheet and pasting them in one of two possible locations into another worksheet - depending on a title for my data. The title I will search on is located in worksheet "Sheet1". If I find the title "WESTERN PERSPECTIVE" in Sheet1, I want to copy a range of values into one place on the other worksheet "Sheet2", otherwise if I find the title "EASTERN PERSPECTIVE" I want to copy a range of values into the 2nd place on my other worksheet "Sheet2".
My logic should follow:
If found "WESTERN PERSPECTIVE" in Sheet1, paste values into area 1 of Sheet2, else do nothing.
If found "EASTERN PERSPECTIVE" in Sheet1, paste values into area 2 of Sheet2, else do nothing.
I do not require coding for the copying and pasting, just the IF logic based on Found fields. I do have the coding which selects the field if the 'Find' is successful:
Cells.Find(What:="WESTERN PERSPECTIVE", After:=ActiveCell, LookIn:=xlFormulas _
, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False).Activate
how to apply this function to my sheet given below. In this budget sheet, I want to create a graph which would show all the items percentage (item by item) with the values given in columns C & H only, leaving out the lines which are empty or bear 0 values.
View 2 Replies View Relatedi know it is possible for a selection in a drop down box to determine another field using the INDIRECT function in validation
eg - 1st drop down box - Football, Rugby, Cricket
2nd drop down box (if chosen football) - displays list of football teams
2nd drop down box (if chosen rugby) - displays list of rugbyteams
2nd drop down box (if chosen cricket) - displays list of cricket teams
but is it possible for the 1st drop down box to determine what is available in a range of other drop downs?
eg - 1st drop down box - Football, Rugby, Cricket
2nd drop down box (if chosen football) - displays list of football teams
3rd drop down box (if chosen Man Utd) - displays list of Man Utd players
Is it possible to set up a cell to either return a vlookup result or allow a specific data validation list? For example, if precedent cell is blank, then I want to perform a vlookup and return result, but if not, then only allow a choice from an unrelated list.
View 5 Replies View RelatedSee attached. I cannot get my indirect function to work in Cell K2 based on cell J2
Data for the Validation is in cells W1 to AC14
I want to do data validation in Column K based on Column J, but cannot get the indirect function to work to past into the data validation tool
I have named all my ranges.
AM Call Log.xlsm
I need to compare 2 cell with 1 specification reference.But the function can't give return value as per required.Both 2 input cells using Data Validation List.
Please refer attachment for some examples : matching.xlsx
I have the following formula in a Data Validation List:
=OFFSET(B8,MATCH(J2,
(CHOOSE(B7,D1Array,D2Array,D3array,D4Array,D5Array,D6Array)),0),1,COUNTIF(CHOOSE(B7,D1Array,D2Array, D3array,D4Array,D5Array,D6Array),J2),1)
In B8 it is the formula =VLOOKUP(B7,LookupTable,2,0). and the lookup array is this 1$H$112$J$113$L$114$N$115$P$116$R$11
So the value returned in B8 will be a the start reference for the OFFSET function. This works but it retuns blank values and not the values in the arrays.
I am using a data-validation-list with =INDIRECT(B7) as the source. It works as expected except for after the file has been closed and reopened. When it is reopened, the source is changed to =INDIRECT(#REF!).
I have tried =INDIRECT('Worksheetname'!B7) but same result.
I have a data validation on a cluster of Cells that has a name.range = "match". On clicking on a Cell in Row 61 belonging to range = "match" i get a Data Validation|Custom formula(Alt+A+V+V) "=J61>=0"
now how can i convert this function of Data Validation to a Vba script.
To be Exact what i need is....
If a value is entered in cell belonging to range.name = "match"
then check the value in "corresponding row" of the column J.
If Value is greater than J
then stop vba script and show message box.
If value is not greater than J then run desird Code.
I hope the following picture might clear things even more of what im looking for..
I have attached a sheet that I am working on. I want cell G1 to be less than or equal to 165. That cell contains a formula. If the formula takes the number to over 165 the validation is allowing it.
View 2 Replies View RelatedI have four cells c1 thru c4. The SUM of these cells must equal 1. I want to display an error message "sum of cells not equal to 1.0" but only when data has been entered in all four cells.
For instance =SUM(C1:C4, "<>1") should display the error message. Is there a way to write the formula with an IF statement and still use data validation with error message box?
Assumptions:
-Will ignore blanks
-Error message "Sum of cells are not equal to 1.0" until values in all four cells have been entered, not after a value is entered in a cell. (validate expression after all four cells have values or blank)
Scenarios:
c1 = .25, c2 is blank, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .25, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .30, c3 = .25, c4 = .50 FALSE error message should display after value is entered in c4
etc
What I don't want is for the error message box to display after .25 is entered in c1 because the user is still in the process of adding values. Can this be done using Data Validation in Excel 2010?
I have a test due in the morning, and I really need this question answered ASAP, if anyone could. I need to create an IF formula for this situation: the standard Mhz is 500. Give 55.00 for that standard. But for every increase of of Mhz, give 25.00 per 100 increase.
View 2 Replies View RelatedI've got a worksheet with five columns of data. The headings run from a1:e1
The number of rows can be anything up to 200,000 rows (I'm using Excel 2007).....
According to what I've read so far in this forum, this will be cakewalk for you guys to find out of (or at least so I hope.. :-) I don't know much about Excel, and what I do know is just logic sense, and a bit of common math.
My problem is in a sheet I use for my personal economy. (I'm a neatfreak, and a nerd...) The logic of my sheet is that I seperate the different type of monthly expenses, and sum them individually. The way I do this is that the A Column identyfies an expense (where 1 = rent, 2 = food, 3 = gas etc) while the C column is the expense itself, Example:
A B C
On account 500
1 rent -200
2 food -20
3 gas -10
2 food -10
Sum expenses -240
On account 260
I then use this formula to discern them:
{=ABS(SUM(IF(A$4:A$30=X;C$4:C$30;0)))}............
I have an Excel workbook which contains data entry fields, which have different types of data validation rules - like Lists, Date, Whole Number.
I do not want end users to remove these data validations as well as the formatting of these cells by doing copy/paste. So, I have implemented techniques mentioned in the following post, and elsewhere - to override the paste functionality and implement PasteSpecial values automatically.
[url]
To keep it simple, I'm only supporting pasting a single cell at a time.
Now my problem is this:
Doing the PasteSpecial values programmatically doesn't prevent the user from pasting values in the cell that violate the data validation rules. So, I can paste a string into a cell having data validation as Whole Number, or a invalid string into a cell having data validation as List.
The following post just suggests disabling paste whenever data validation is present:
[url]
But I would like to allow the paste operation if the value being pasted is a valid value for the cell's data validation.
how to exclude a blanck cell from logic?
I have tried what you see below but neither works as desired.
If Not vData(n, 9) = 0 Then
If Not vData(n, 9)Is null Then
have corrected code error
I have attached excel with the logic I am using, but I have a problem and needed logic to update to make sure it is not inserting same data (duplicate data).
Please update the logic so that if it is having same data in sheet 3 it should not insert or delete duplicate.
Code:
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 9), bi1 As Byte, vData1(1 To 9), bi2 As Byte, vData2(1 To 9), bi3 As Byte, vData3(1 To 9), bi4 As Byte, vData4(1 To 9)
Set ws = Sheets("Sheet2")
For bi = 1 To 9
[Code] .........
I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.
i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list
First Name
Surname
Paul
Smith
Paul
Jones
Tony
Phillips
We receive payments in either USD or HNL. I want to be able to have a final price (last column) that puts all prices in USD. I have a reference cell on a separate worksheet (drop down inputs) that we will use to store the data for validations and the conversion rate. We use one conversion rate for all transactions for a fiscal year, so only need to update once a year. Not sure how to make this work.
View 2 Replies View RelatedI am trying to set up a data validation to ensure that when a user enters a number in column A that matches a previously entered number in column A, the user is only allowed to enter the same date for the number it matches in column B.
For example, if:
Row 3 column A = 1320
and
Row 3 column B = 16-Dec-07
and
Row 15 column A = 1320
then:
Row 15 column B must be 16-Dec-07
can i do two data validation on the same cell
the first one to make a list form Define name "Lists"
and the other to make sure the name is not repeated
This is a logic based macro that needs to compare values in 1 column above a specific cell and take action until the column has no more data. Here's what I'm trying to do (and I've also attached a sample of desired results):
1) I want user to input starting cell. So I need to create a button for that.
2) This is where the logic begins and I'm having difficulty.
From cell defined in button, I move up one cell in that column and compare that value to the original cell.
If the value is greater than original cell then logic needs 2 outcomes:
a) move up 1 cell in column and if that value is less than original cell, then extract that value and copy that value one cell to the right or 1c.
b) move up 1 cell in column and if that value is greater than original cell, then move up again, until find lesser value than original cell. Once we find value less than original cell, extract value and copy value one cell to the right or 1c.
I have already set up a data validation, if if you pick a region, you only get that regions items in the next column.
A
B
C
D
E
[Code]...
But what I would like to do is in Column E(for this example) have 3 extra lists for Location in each region. So if I pick S in A, then in E I only want the Southern options.
I have checked out this website, but I cant seem to work out how to add the third dependence [URL]....
I am trying to set the data validation on a cell based on another cell value
So basically if the User enters say CAN in cell A2, cell B2 should use "listCAN" range as the data validation list
and if i enter US in A2, B2 should use "listUS" as the data validation list
How can I create a drop down list, where the items available for selection in this drop down list are contingent upon another selection made in a seperate drop down list.
View 2 Replies View RelatedI have a cell containing data validation list and what i want to do is that when i choose the 1st value from this list .. a number (for examole 1) appears in another blank cell .. and if i choose the 2nd value from the list .. another number (let's say 2) appears in the blank cell.
So how to use the if statement in a cell that contains a data validation ?!!