Weight
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
[Code]...
Monday Input Weight: 23
Monday Input number: 5
I'd like to autofill the above table from the "Input" numbers and weights I would enter elsewhere.
Previously, I would do that like this:
=IF(Y$10=0; ""; IF(Y14
I need to create a summary table of dates and data. The trick is I need the vlookup function to look up say 7/1/08 in a table that all the dates are of the format 7/20/08 and so on. Is there a way to have the vlookup return the proper data by ignoring the day.
I am looking to be able to alter my table_array section in VLOOKUP to adjust in date.
exampe: =vlookup(A4,'[Daily report - August 25.x;sx]Facilities'!A4:AY100,84,FALSE)
and I want to be able to change the August 25 -> August 26 repeating so that as I drop the next date in it will update to the correct tab.
I have the dates above so if I could somehow just the date to another cell instead that would work as well. I just do not know how.
Essentially I need to grab data from a separate workbook everyday and compile it to one master list.
I have a vlookup function which takes the data from a table in a closed file. A folder where the file would be located will change based on the value in the cell reference.
I used below formula which works, but every time when i drag or try to edit and enter, the path of the file path brokes and i need to reselect the path where the file is located. Is there a way where i can stop this?
Code:
=VLOOKUP(A2,'C:&E1&[Myfile.xls]Sheet2'!$A:$B,2,0)
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))
Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
If you have a data in two dimensional table. and you need to fill each cell with the value returned from another table.
Example : this the my table
Company A Compay B Company C Product 1
Product 2
Product 3
Product 4
and this my data :
Products Companies Price
Product 1 Company 8 Product 1 Company A 7 Product 1 Company B 5 Product 1 Company C 6 Product 2 Company B 6 Product 2 Company C 9 Product 3 Company A 10 Product 3 Company B 8.8
I currently have a table with a range of headings (row & column), and the necessary data for it. On a new worksheet, I have a table with only a few of the headings, and I was wondering if there was a macro that would automaticlly match the headings of the new sheet with the other table, and fill in the ncessary dat, as on the other sheet.
View 3 Replies View RelatedI have an 'existing results table' as per my attached sample. From this table I need to create a list of 'sold' for each annual date range - i.e. I need a separate list for items sold within that date range. see my example in red. *Note. I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
View 4 Replies View RelatedI have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I created a lookup table that works quite well. It even has if statements in the LookUp Formula. However, I have to update the table it pulls the information from each day. I wind up recreating the range each time because the table always has more rows each time. Is there a way I could just paste the table in each day and not have to change the range? The columns never change.
View 9 Replies View Relatedlet me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
I'm trying to see if you can look up multi columns for a number and when it finds it return back to one column and return that data?
I am trying to sort out territories for a state I work on; the territories are divided up by zip codes.
i.e.
A B C D
territory 1 12345 54321 11222
territory 2 22222 33333
territory 3 44444 55555
and what I want is to say put a formula in cell B3 on Sheet 1 pointing to cell C3 that has zip code 33333. I want it to then take that and look in Sheet 2 and search A1:D3 and when it finds 33333, return "territory 2" back to cell B3 on Sheet 1.
I have to fill in data in excel sheets and I am using VLOOKUP. The sheet has upto column AF and 1048500 rows. I have copied the data table (table array used for the vlookup) after column AF and the data table has about 70000 rows. One formula is to be filled in column AF and another in column AG. Filling in the formula is taking up to 3 hours for a column!! how i can improve the processing speed without breaking the file into smaller files? There are no other formulae in the sheet - i've replaced all formulae with values.
View 1 Replies View RelatedVlookup a table, to another table that has multiple values.
E.g.
Table
GPASP002
Look up table - need to return second coloum but not the first value, all the values?
GPASP002 KZASP100
GPASP002 KZASP500
GPASP002 KZASP600
GPASP002 KZASP501
GPASP002 KZASP502
GPASP002 KZASP601
I am trying to create a table showing the yearly average occupancy rates per quarter for every year between may 1998 and december 2008 inclusive (for licensed hotels, motels and guest houses, and serviced apartments in Australia; if that interests you).
I have a spreadsheet with a row of data showing the appropriate quarterly results for those dates. Let's say the data for this is displayed A1 through to A44.
For the yearly per quarter averages, let's say they are to go from B1 through to B11, I know I could put, for each year, an average formula with the relevant data range. Finding this to be tedious, I tried to fill-down.
I learnt the hard way however (not being too aware of how excel's grammar ticks) that the fill down function will not work for me. i.e., if B1 contained the average for the data range A1:A4 (the four quarters of 1998), the filled-in B2 would have the data range A2:A5 (i.e. the 2nd quarter of 1998 through to the 3rd quarter of 1999).
In the worksheet just say:Cell A1: Jan-11-2009 as today date. Cell A2: What is a date function I need to put in there so when a computer clock change to 12:01am it automatically fill in a next day it should be Jan-12-2009 and continues do so for the next day at A3 ....when computer clock change again. Remember I wanted a cells A2...A3...A2000 are blank until the computer clock change to 12:01am.
View 5 Replies View RelatedI have a function =TimeSinceIns(3) in cell K3. Where the 3 represents the row number. I would like to fill the function all the way down to cell k100. And be able to do this reguarly. Unfortunately when I use the fill handle it leaves 3 as 3 when I want it to be changing to the appropriate row no. Ie in cell k4 would be =TimeSinceIns(4) and so on.
View 3 Replies View RelatedI've been trying for a while now but I can't do it so I was wondering if anyone could do it:
2) To get the "Overdue Items" page to update according to the overdue items
The database has been shortened drastically to be able to be able upload
I have a little problem that i need to solve in VBA(because its a part of a bigger solution in VBA). I need to complete a table.
I have:.......................
I have a list of items in Column A and size info on Column B i want to being in the info to another sheet with a vlookup but the problem is that I have a lot of items with different colors so after the item no. it has a dash and a letter or two for the color so i want to bring into my new sheet all info.
I have in my old sheet for all items regardless of color so for instance in my old sheet i will BR1000-EM and then in my new sheet i will have BR1000-R and BR1000-SA and BR1000-YC how do i make a vlookup it should only lookup the values in both sheets only till the dash (i cant use a certain no. like left,6 because the item no can have more then 6 but it always has a dash when it has a color code) also not all items have dashes so the dash is not always there but when its there i would like that the lookup should stop by the dash.
See attached file for a better understanding.
I would like to use a formula in Column 1 (highlighted) which tells me if it relates to Fund 1 or Fund 2 using the Mapping table in column H.
Using the mapping table would be nice but no need to.
Excel Question.xlsx‎
I'm looking to set up a table in Excel (or possibly Access that is then referenced through Excel). But end goal would be to be able to type in an Item Number and then Excel automatically fills in the Description, weight, price and other information about that item number. That way, I don't have to type in "11108.1" and "Computer Mouse" and "$15.98". I want to only type in "11108.1" and it knows to fill in the other information. Is this possible in Excel? I've searched through many functions and haven't found it so I'm thinking it may require a combination of formulas.
View 1 Replies View RelatedI'm looking the fill cells in column A to the bottom of my table, however, new information is added to the table on a regular basis and so designating the range as cell numbers won't work. Here's what I have so far: ...
View 9 Replies View RelatedI am reposting this as my previous post was deleted.. i dont know the real reason for the same...
The raw data in the attachment contains:
•C1 to AI1 refers to vehicle numbers.
•Column A refers to Shift Time
•Column B refers to Number of vehicles required in that particulars Shift time
The output:
•As you can see in the Sheet “Output Required”, fields marked in the color “light green” are manually allocated vehicles numbers available and required according to shift time
•The logic used behind allocation is the same vehicle should not be used before or after within the span of 3 hrs, the gap between the vehicle usage before and after should be minimum 3 hrs. And the maximum time gap can be any value.
•Vehicle usage can be maximum (ie. You can use the same vehicle by rotating within 24 hrs but keeping in mind that it is not used before 3 hrs).
• all the available vehicles must be used before the same used vehicle is used in the new shift... ie. You should utilize all the vehicles before one is duplicated
My formula in sheet "A" in cell D7 is this
=IF(Activity_Log!C2="BH",Activity_Log!F2,"").
What I would like to do with it is fill in row D7 to AH7 with this formula without changing the row reference in the IF function, only the column reference.
On the Activity_Log worksheet, my data is listed from cell C2:C32, which is selected from a drop down list, and F2:F32, which contains the formula =(E2-D2)*24.
I've attached a sample : Sample_MonthlyReport.xlsx
the function I'm referring to is when you have a value in a cell and you hover your mouse cursor over the edge and get the black cross with arrows on all corners. Once you drag the cell into another location, it copies the the data into the other cell.
I need a way to stop this from happening, because this causes reference errors on other sheets when users do this by accident. However, I still need to allow the user to be able to type in that cell, use the autofill option, and the Ctrl+C option. Is there a way to program a macro that can be put in the sheets to do this for specified cells or ranges?
I am trying to use the vlookup function together with an offset function but i am not getting it to work properly.
The situation is as follows:
I have a column E in which i use the vlookup function to find its corresponding value in B which in turn refers to a named range. However, the figure i want the function to return is 2 columns to the right and 2 rows above the value which the vlookup funtion finds in the first column.
I have though of using the offset function, but i cannot figure out how to make this work.
I have a table
COL1 Col2
red 1
blue 2
yellow 3
then I have a column that just has the names
Col1 Col2
red
blue
yellow
I need a way to fill in col2 with the correct value.
I have got the following problem. I have got a table which looks like this:
=Time!A1
=Open!A1
=max!A1
=min!A1
=Close!A1
When I mark the selected cells and scroll down using the autofill option I get this:
=Time!A1
=Open!A1
=max!A1
=min!A1
=Close!A1
=Time!A6
=Open!A6
=max!A6
=min!A6
=Close!A6
Why does it give A6? I want A2 instead of A6 because I want to create a table from A1 to A500 but without these jumps from A1 to A6.
From four known set values at the four corners of a table, how can I fill in the values in between? I.E. the inverse of extrapolating. I have a program within a programme that will do this, so i know its possible, but ideally i would like to be able to do it straight into a spreadsheet.
View 3 Replies View Related