I was wondering if there is any way possible to link your pivot table filters to filter the data the same way in the table that it comes from? So if i had date as one of my headers and i filtered the date to a specfifc date, is there a way to also filter the date in the data source sheet?
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
I have a report that was created for 2005 that contains two worksheets: a "source data" worksheet and a " pivot table" worksheet. I cleared out the 2005 data in the "source data" worksheet and replaced it with 2006 data...after this I refreshed the Pivot Table and everything seemed fine. When looking at the file size I noticed that it was almost twice its original size....upon further investigation I found that the Pivot Table was internally holding onto the old source data (the "Show" functionality of the rows/columns in the table lists the 2005 row/column headers as well as the 2006 headers....even though no data from 2005 is shown in the Pivot Table).
Does anyone know how to purge the old data from the internal Pivot Table memory?
I hope this is enough information....let me know if you need more.
This is my first time usng a pivot table. I need to link the pivot table containing three fields to the array of data containing five fields below. Here is a sample workbook. I would like to make it so that when you select a criteria in a field in the pivot table, it will filter the data in the array below. Attachment 249295 I haven't recieved a reply in the other forum probably cause very few people view that particular forum. Heres the link: [URL]...
There is pivot table for some reason the last column (YEAccts), which sums all the other columns values is exluding the 1st column for some reason. This "YEAccts" shows up fine in the pivot table "field list". And I followed the source for this and it's a table in a different tab that pulls data from an access query connection.
The name of the column that is summing up the rest of the columns is "YEAccts", but for the life of me I can't seem to find where this column is in the source table tab or even in the access query where the data is being pulled from.
How to find this "YEAccts" column? Also, why would it exclude not summing up the data in the first column?
I was wondering if anyone knows how to change the souce data for a Pivot Table? Eg if I have the Pivot table looking at Columns A & B lines 1 - 20 and I want the Pivot to also include Column C and lines 21 - 50, how would I do this? for a chart I can just right click and select the "Source Data" option but it seems that this is not available for Pivot Tables.
A co-worker of mine set up a pivot table using data saved on an external data source on a shared drive. I would like to create a similar pivot table myself, linked to his pivot table so when he gets updated data, my pivot table also will update accordingly. My question has to do with the pivot table data source. How do I copy the connection?
I am trying to link data from a pivot table we have in excel to a separate excel sheet.
The pivot table contains an up to date list of our inventory, however, we want to take that data and put it in a cleaner looking excel that we can e-mail to customers and publish on our website. Going individually, through every product takes too much time to have an up to date stock every day. Its even difficult to manage if we want to update just once a week.
When I link the cells of the pivot table to the new excel sheet they are constantly changing values as people are constantly editing the filters of the pivot table to look up various things.
I have a pivot table created. How do I determine which sheet it is pulling the data from, hence the source of the pivot table? Also, if can you go into source and modify data points, then in pivot table, will the results would be automatically modified with updated data points?
I've got a bit of a problem revealing pivot table source data, so just wondering if anyone know how to reveal it? My colleague sent me the spreadsheet, I can see the pivot table, but I can't find the source data that the pivot table links to.
I am using pivot tables/charts for drilldown reporting. After running a complex macro to consolidate multiple reports into one range, I need to generate pivot tables and charts.
These reports will change month to month in the number of entries they have (template will be identical), and therefore my data source range for the pivot table is bound to change. Therefore my question is, how to develop a macro that will dynamically change the source data range to the amount of rows?
why the data reference for a pivot table is changing after I email the workbook to a client. The source data and the pivot tables are all part of the same workbook and I can't understand why its saying can't find source data. Excel 2007 is being used on both computers.
I am using pivot tables which were created by another (no longer contactable) and have found two fields in the field list which are not part of the source data i.e. neither are column headings but are used in the pivot table.
My questions are:
1. How are these field created?
2. How can I examine these fields for formulae (as I have found one of them returns an incorrect value)?
Field1 return a numerical value which is the difference between two columns Field2 shows this as a % (but incorrectly)
My fixed asset software will not allow me to show multiple individual months of acquisitions. I can export each month. This will create a separate spreadsheet for each month, but the problem is that each spreadsheet may contain the same asset, but additions to that asset.
I have some source data which is used to generate a pivot table. The data is conditionally formatted to color certain cells based on some other values. Once the data is transferred to the pivot table this formatting (as well as the number formatting) is lost.
I have found some code to fix the number formatting issue but can't seem to locate something similar to set the interior color of the cells in the pivot table to match that of the original source data.
I have a pivot table whose data source is located on a shared network drive. Each day a new data source is uploaded and the only thing that changes is the date in the filename (ie. DataSource080813.xlsx). I am trying to find a way to set the data source to update with todays date automatically each day so that when you open the workbook it is always current days data. I have a cell (B2) with a formula in it that gives me the file location of todays file (ie. X:TeamFolderFile1DataSource080813.xlsx, where the date is derived using the TODAY() function. Is there a way to set the pivot table data source to cell B2 and have it use the text from B2 as the file location?
Trying to create a basic pivot table from a CSV file for our users. What I've done in the past is open my CSV and then take the option Insert > Pivot Table to create the pivot table from the open CSV/worksheet. My question here is .... how can I save this .XLS and refresh the CSV data within? Or do I need to use an external data source? I don't want to have to use any drivers. I'd love to be able to just point to a CSV or TXT file on our server and that be that.
For something else I have used Web Query strings to point to .php scripts that send back data in XML format. Is this an option?
Again, the goal is for me to create a pivot table and just have our user's open it up and have current/refreshed data within. We can run jobs overnight or on-demand that update the data source.
I would like not to have to update the source data for the pivot table in my database. I've read that you can solve this by using a Dynamic Named Range and using that as the source for the pivot table. That way the pivot table will expand as new data is added to the database. The formula I used to create the DNR is:
I wish to hide some columns that contain data used to update a pivot table in another worksheet. What I want to know is though, will this affect the pivot table? I think that graphs in excel will normally ignore data in hidden cells, so I was wondering if it was the same with pivot tables.
if it's possible to break the connection between a pivot table and the data source whilst still maintaining the data in the table? I could try copy/paste special/paste values but thought there migth be a 'proper' way to preserve the data.
I noticed that when I click on a cell in my Pivot Table a new worksheet pops up with the requested information (essentially a filtered version of my data source depending on what cell I clicked) is there a way for that information to appear on the same worksheet as my Pivot Table? And if so can I also edit what parts of the data source appear?
I work in my Client's office and assist in settling construction disputes. Part of this work is to browse/search their server for documents that may assist in strengthening their case.
During this review I have found an excel document which is a text-only version of a pivot table, ie someone has done a copy, paste special, values into this sheet. I need to extract the original source data from this table back into the list format, as the original source of the data cannot be located
The row titles on the left are activity descriptions, the column headers are dates and the data in the body of the table is hours. As an idea of size the data is spread over 213 columns and 45 rows. Their are more blank cells in the table than entries.
What I would like to do is create the data in it's original form ie
Column A; Date Column B; Activity Description Column C; Hours
and have a separate row for each instance of an entry of hours from the pivot table.
Attached is a file which shows the problem. I bascially have two headings. The first heading contains the letter "b" 9 times but only has values against two "b"s. When this is entered in a pivot table and the value is drilled down (in this case 3, highlighted in yellow), I only want the numbers attached to the two "b"s to be shown rather than all the 9 b's (thereby omitted all the zeros).
I have a pivot table report connected to an external data source (OLAP cube).I want to automatically refresh the pivot table report everytime the OLAP cube data changes.
I know we can use Automatic refresh on open of workbook or time intervals after which to refresh .But i want the auto refresh to work even if the workbook is already open and there is no definite time interval after which the cube is likely to change.SO,by defining intervals for auto refresh i do not intend to waste time refreshing even if there is no change.
There are multiple pivot table reports and pivot charts connected to the same OLAP cube.
I am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.
Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...
Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg
I have created a pivot table in a workbook which relates to data from 2011 - 2012 and this works perfectly. What I now need to do is to copy the pivot table (without the data source) to a new workbook for data which will be collected from 2012 - 2013. Unfortunately when I copy it and try and find the new data source it does not update the filters according to the data in the new workbook.