I'm used to work with the Excel 2003 edition, however I just changed the version to 2010. As result of that I do have the following question:
How can you view the source data of a pivot table in Excel 2010?
I am using Excel 2010 and have a workbook with two sheets - "Risks & Issues" which contains the source data and "Risks - Summary" which contains a Pivot Table called "Dashboard"
I would like to create a command button called 'Refresh Data' which will be on the "Risks - Summary" sheet. When I add a new line to the "Risks & Issues" sheet, I would click the button in "Risks - Summary" and it will update the Pivot Table range.
So far I've tried using some examples found on this site, although with no experience in VBA macros, I'm not really sure what they do; all I know is that they cause an error.
Code:
Sub Refresh_Click()
Sheets("Risks - Summary").PivotTables("Dashboard").SourceData = Sheets("Risks & Issues").Range("A2").CurrentRegion.Address(True, True, xlR1C1, True)
End Sub
[Code].....
I've been trying to create pivot table in excel 2010. Unfortunately I've been getting this message "Data source reference is not valid"?
View 2 Replies View RelatedOn a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
Excel 2007 crashing when trying to up date a data source within a pivot table?
View 3 Replies View Relatedhow to find the source data range of a pivot table (that already exists) in Excel 2007?
View 1 Replies View RelatedI have a report that was created for 2005 that contains two worksheets: a "source data" worksheet and a " pivot table" worksheet. I cleared out the 2005 data in the "source data" worksheet and replaced it with 2006 data...after this I refreshed the Pivot Table and everything seemed fine. When looking at the file size I noticed that it was almost twice its original size....upon further investigation I found that the Pivot Table was internally holding onto the old source data (the "Show" functionality of the rows/columns in the table lists the 2005 row/column headers as well as the 2006 headers....even though no data from 2005 is shown in the Pivot Table).
Does anyone know how to purge the old data from the internal Pivot Table memory?
I hope this is enough information....let me know if you need more.
Thanks in advance for any help,
Jon
Can Pivot Table chart add another data from another sheet? I attached the link for this file (Add data1), it is because the file consists of several sheets and I do not know how to show here.
I would like to add the data from the "Rate" sheet into the Pivot Table chart (Chart.PT). I made an example by using normal way (Chart.Case (9)), the column series in the chart is the one I added from the "Rate" sheet. I wonder if I could do the same in pivot table chart.
is it possible to select the data to view by running a macro. my table is based on dates. i would like to see all data before the date i run the table and 6 weeks in front only.
View 3 Replies View RelatedI'm trying to create a pivot in 2010, which gathers a cumulative amount from data sources within two different worksheets.
View 2 Replies View RelatedI was wondering if there is any way possible to link your pivot table filters to filter the data the same way in the table that it comes from? So if i had date as one of my headers and i filtered the date to a specfifc date, is there a way to also filter the date in the data source sheet?
View 2 Replies View RelatedI was wondering if anyone knows how to change the souce data for a Pivot Table?
Eg if I have the Pivot table looking at Columns A & B lines 1 - 20 and I want the Pivot to also include Column C and lines 21 - 50, how would I do this? for a chart I can just right click and select the "Source Data" option but it seems that this is not available for Pivot Tables.
A co-worker of mine set up a pivot table using data saved on an external data source on a shared drive. I would like to create a similar pivot table myself, linked to his pivot table so when he gets updated data, my pivot table also will update accordingly. My question has to do with the pivot table data source. How do I copy the connection?
View 3 Replies View RelatedI have a pivot table created. How do I determine which sheet it is pulling the data from, hence the source of the pivot table? Also, if can you go into source and modify data points, then in pivot table, will the results would be automatically modified with updated data points?
View 2 Replies View RelatedI've got a bit of a problem revealing pivot table source data, so just wondering if anyone know how to reveal it? My colleague sent me the spreadsheet, I can see the pivot table, but I can't find the source data that the pivot table links to.
View 3 Replies View RelatedI am using pivot tables/charts for drilldown reporting. After running a complex macro to consolidate multiple reports into one range, I need to generate pivot tables and charts.
These reports will change month to month in the number of entries they have (template will be identical), and therefore my data source range for the pivot table is bound to change. Therefore my question is, how to develop a macro that will dynamically change the source data range to the amount of rows?
why the data reference for a pivot table is changing after I email the workbook to a client. The source data and the pivot tables are all part of the same workbook and I can't understand why its saying can't find source data. Excel 2007 is being used on both computers.
View 9 Replies View RelatedI am using pivot tables which were created by another (no longer contactable) and have found two fields in the field list which are not part of the source data i.e. neither are column headings but are used in the pivot table.
My questions are:
1. How are these field created?
2. How can I examine these fields for formulae (as I have found one of them returns an incorrect value)?
Field1 return a numerical value which is the difference between two columns
Field2 shows this as a % (but incorrectly)
My fixed asset software will not allow me to show multiple individual months of acquisitions. I can export each month. This will create a separate spreadsheet for each month, but the problem is that each spreadsheet may contain the same asset, but additions to that asset.
Spreadsheet 1
....Description............................Dept...................January acquisition
.....Building____________________Plant______________1,000,000
Spreadsheet 2
.....Description..........................Dept...................February acquisition
......Building___________________Plant______________1,000,000
.....Welder____________________Metal_________________5,000
What I want is this
Spreadsheet 3
.....Description.........................Dept..................January Acq..........February Acq
......Building__________________Plant____________1,000,000__________1,000,000
......Welder___________________Metal_________________________________5,000
I am stuck trying to sort data that looks like the following, into a format that I can use as source data for pivot tables/charts.
Excel2007ABCDEFGHIJK2MalayMalayMalayMalayMalayMalay
ChineseChinese3MaleFemaleFemaleMaleFemaleFemaleMaleMale
436-4536-4536-4525-3525-3525-3536-4536-455
DateArticleContentLapseCurrentCurrentCurrentLapseLapseCurrentCurrent612-SepRelieving 40 years - Oct 15, 1972
Thick Haze continues to blanket MalaysiaHistory42712-SepRelieving 40 years - May 5, 1972
All Sharifah wants is a pair of legsHistory1222812-SepA man and his agonyHistory3223912-SepA lesson on Sept 16History22Sheet2
I will need to group Data multiple ways. However, I cant work out a good way to sort it. Can I have a suggestion on layout that I will be able to arrange data appropriately.
My macro is designed to look at a summary source tab and create a new tab for each unique project number. It then creates a pivot table from five different source detail tabs and filters on the project number. If a tab already exists it selects the tab and moves on to the next project number. There are six pivot tables created for every project.
New data is added each month to the source tabs and I have a macro to delete all pivot tables and the macro will recreate the pivot tables when ran again.
Issue: Running out of resources At work I'm limited to the use of Excel 2010 (32bit) so I'm restricted on 2GB of memory. At home I ran the file successfully (64bit) and it was around 3GB of memory.
My macro creates a new pivot cache for every pivot table where as I'm trying to only use 6 pivot caches in my coding. I kill it half way through and it's around 100+ caches causing unnecessary usage of memory.
Fix / Solution:
Correctly code the vba to only create six caches and code the rest the pivot tables to use that cache.The only difference in the Pivot Tables is that it’s sorted on the Project Number.
Code:
Dim VBAPPPC As PivotCache
Dim VBAAPPC As PivotCache
Dim VBAPRPC As PivotCache
Dim VBAEXPC As PivotCache
Dim VBAMJPC As PivotCache
Dim VBAIVPC As PivotCache
Dim VBAPT As PivotTable
[code]...
I have some source data which is used to generate a pivot table. The data is conditionally formatted to color certain cells based on some other values. Once the data is transferred to the pivot table this formatting (as well as the number formatting) is lost.
I have found some code to fix the number formatting issue but can't seem to locate something similar to set the interior color of the cells in the pivot table to match that of the original source data.
I have a pivot table whose data source is located on a shared network drive. Each day a new data source is uploaded and the only thing that changes is the date in the filename (ie. DataSource080813.xlsx). I am trying to find a way to set the data source to update with todays date automatically each day so that when you open the workbook it is always current days data. I have a cell (B2) with a formula in it that gives me the file location of todays file (ie. X:TeamFolderFile1DataSource080813.xlsx, where the date is derived using the TODAY() function. Is there a way to set the pivot table data source to cell B2 and have it use the text from B2 as the file location?
View 1 Replies View RelatedI am using an Excel file (Raw.xlsx) to store my raw data, and take another Excel file (Pivot.xlsx) to make PivotTable from Raw.xlsx
When generating the PivotTable, every works fine. When click [Refresh] in the Raw.xlsx, whatever changes been made in the Raw.xlsx can "sync" to the Pivot.xlsx
However, once I save and reopen the Pivot.xlsx, I can't refresh the PivotTable anymore. I've tried changing Data Source, but it doesn't work.
Trying to create a basic pivot table from a CSV file for our users. What I've done in the past is open my CSV and then take the option Insert > Pivot Table to create the pivot table from the open CSV/worksheet. My question here is .... how can I save this .XLS and refresh the CSV data within? Or do I need to use an external data source? I don't want to have to use any drivers. I'd love to be able to just point to a CSV or TXT file on our server and that be that.
For something else I have used Web Query strings to point to .php scripts that send back data in XML format. Is this an option?
Again, the goal is for me to create a pivot table and just have our user's open it up and have current/refreshed data within. We can run jobs overnight or on-demand that update the data source.
I would like not to have to update the source data for the pivot table in my database. I've read that you can solve this by using a Dynamic Named Range and using that as the source for the pivot table. That way the pivot table will expand as new data is added to the database. The formula I used to create the DNR is:
View 7 Replies View RelatedI wish to hide some columns that contain data used to update a pivot table in another worksheet. What I want to know is though, will this affect the pivot table? I think that graphs in excel will normally ignore data in hidden cells, so I was wondering if it was the same with pivot tables.
View 2 Replies View RelatedGiven a pivot table, is there any way that I can determine the source data that was used to create the pivot table?
I suspect that the pivot table was created using only part of the data, but I'm not sure.
if it's possible to break the connection between a pivot table and the data source whilst still maintaining the data in the table? I could try copy/paste special/paste values but thought there migth be a 'proper' way to preserve the data.
View 8 Replies View RelatedI noticed that when I click on a cell in my Pivot Table a new worksheet pops up with the requested information (essentially a filtered version of my data source depending on what cell I clicked) is there a way for that information to appear on the same worksheet as my Pivot Table? And if so can I also edit what parts of the data source appear?
View 1 Replies View Related