Can't Refresh Pivot Table When Using External Data Source
Apr 30, 2014
I am using an Excel file (Raw.xlsx) to store my raw data, and take another Excel file (Pivot.xlsx) to make PivotTable from Raw.xlsx
When generating the PivotTable, every works fine. When click [Refresh] in the Raw.xlsx, whatever changes been made in the Raw.xlsx can "sync" to the Pivot.xlsx
However, once I save and reopen the Pivot.xlsx, I can't refresh the PivotTable anymore. I've tried changing Data Source, but it doesn't work.
View 1 Replies
ADVERTISEMENT
Dec 4, 2013
I have a pivot table report connected to an external data source (OLAP cube).I want to automatically refresh the pivot table report everytime the OLAP cube data changes.
I know we can use Automatic refresh on open of workbook or time intervals after which to refresh .But i want the auto refresh to work even if the workbook is already open and there is no definite time interval after which the cube is likely to change.SO,by defining intervals for auto refresh i do not intend to waste time refreshing even if there is no change.
There are multiple pivot table reports and pivot charts connected to the same OLAP cube.
View 1 Replies
View Related
Feb 5, 2007
In pivot table field Setting > Advanced > page field option, the selection for "the query and external data source is disabled. How do i enable it.
View 9 Replies
View Related
Feb 26, 2014
I have 5 pivot tables on 5sheets, all looking at the same source data in sheet 6
On the source data there is a filter on the headers, if you change the filter, is it possible for all 5 pivot tables to update according to the filter?
My starting point is the below, but there probably is a better way but i would want the sourcedata to equal visible rows on the source data sheet headers run A:K and up to row 10000 .
View 2 Replies
View Related
Mar 27, 2009
I am using pivotable with access queery as the source.
When I set it I cuse that external source browse tool, but it seems to only recognize the source if the dive is the same.
When I go downstairs to try on a users computer there dirive letter(K is different than my (H and it does not work.
View 9 Replies
View Related
Mar 13, 2008
I have a pivot table in spreadsheet A. I have some formulas in another spreadsheet B. The formulas look up data in the pivot table in A and use that data in B to return and answer. Is there a way to refresh the pivot table in A from B without having to open A and refresh the table?
View 3 Replies
View Related
Oct 19, 2007
I have a pivot table created from a cube of data not within the file I am working in. I have created a macro that will update, but only for the specified timeframe. I have a separate worksheet within my file that will allow a manger to specify what timeframe he wants to see. Can I edit a macro to read from a source that is different than where the data is being pulled from?
View 3 Replies
View Related
Sep 7, 2006
I have a report that was created for 2005 that contains two worksheets: a "source data" worksheet and a " pivot table" worksheet. I cleared out the 2005 data in the "source data" worksheet and replaced it with 2006 data...after this I refreshed the Pivot Table and everything seemed fine. When looking at the file size I noticed that it was almost twice its original size....upon further investigation I found that the Pivot Table was internally holding onto the old source data (the "Show" functionality of the rows/columns in the table lists the 2005 row/column headers as well as the 2006 headers....even though no data from 2005 is shown in the Pivot Table).
Does anyone know how to purge the old data from the internal Pivot Table memory?
I hope this is enough information....let me know if you need more.
Thanks in advance for any help,
Jon
View 9 Replies
View Related
Feb 1, 2010
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest)
The problem is i will get "....A file name already exist...do you want to overwrite.." prompt.
Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
View 14 Replies
View Related
Feb 6, 2008
I have an existing pivot table that is feeding from data in another sheet.
The data gets updated every month and sometimes their are more columns of data than the previous month. Everytime there are more columns they are not added into the pivot table when i refresh the table even though they are included in the range.
Is there are way the pivot table will add these new columns when i refresh the table without me having to manually drag them in?
View 9 Replies
View Related
Jul 14, 2014
I was wondering if there is any way possible to link your pivot table filters to filter the data the same way in the table that it comes from? So if i had date as one of my headers and i filtered the date to a specfifc date, is there a way to also filter the date in the data source sheet?
View 2 Replies
View Related
Nov 27, 2007
Will someone please tell me the difference (if there is a difference) between the following 2 lines of ....
View 6 Replies
View Related
Aug 28, 2009
I can't understand why my rate1() function (my macro) doesn't work properly. While I'm dragging M5 cell in Sheet2 down to M14 cell it gives the wrong result.
Even when I change value in Sheet1 and refresh data of pivot table in Sheet2, my function rate1() isn't updated. But my problem is solving (getting the correct result) when I'm going Edit Mode (pressing function key F2) in active Cell M5 or M6 or M7..so on and pressing Enter each time.
View 4 Replies
View Related
Aug 24, 2009
I was wondering if anyone knows how to change the souce data for a Pivot Table?
Eg if I have the Pivot table looking at Columns A & B lines 1 - 20 and I want the Pivot to also include Column C and lines 21 - 50, how would I do this? for a chart I can just right click and select the "Source Data" option but it seems that this is not available for Pivot Tables.
View 3 Replies
View Related
Apr 10, 2013
A co-worker of mine set up a pivot table using data saved on an external data source on a shared drive. I would like to create a similar pivot table myself, linked to his pivot table so when he gets updated data, my pivot table also will update accordingly. My question has to do with the pivot table data source. How do I copy the connection?
View 3 Replies
View Related
Jun 18, 2014
vba in excel 2013 pivot table that updates from an online CRM rows are a to h and it can be any number of rows. What I am trying to do is track progress. In column f values indicate probability for success 10 25 45 90, which can go up or down. The pivot table is refreshed to get the latest values from CRM. the update is handled by a connection to the crm not in the vba.
So far I been researching methods to conditionally format values that went up, down or remained the same since the last refresh with up down and across arrows. I have managed to piece together what I think should work but alas it is not. So I have come to you internet.
My code first clears any formatting and goes down the column avoiding null or empty cells, comparing the values in column f to values in column j.
I have 3 conditions greater than, less than or equal to, and would like add an icon for each based on the result of the comparison.
Finally when it finishes the column the code copies the current values in the pivot table column f to column j outside the pivot table which i hope to be able to hide once the cf works. The code is below
[Code] .....
View 1 Replies
View Related
Mar 27, 2009
I have a pivot table created. How do I determine which sheet it is pulling the data from, hence the source of the pivot table? Also, if can you go into source and modify data points, then in pivot table, will the results would be automatically modified with updated data points?
View 2 Replies
View Related
May 10, 2009
I've got a bit of a problem revealing pivot table source data, so just wondering if anyone know how to reveal it? My colleague sent me the spreadsheet, I can see the pivot table, but I can't find the source data that the pivot table links to.
View 3 Replies
View Related
Sep 26, 2011
I am using pivot tables/charts for drilldown reporting. After running a complex macro to consolidate multiple reports into one range, I need to generate pivot tables and charts.
These reports will change month to month in the number of entries they have (template will be identical), and therefore my data source range for the pivot table is bound to change. Therefore my question is, how to develop a macro that will dynamically change the source data range to the amount of rows?
View 5 Replies
View Related
Feb 22, 2010
why the data reference for a pivot table is changing after I email the workbook to a client. The source data and the pivot tables are all part of the same workbook and I can't understand why its saying can't find source data. Excel 2007 is being used on both computers.
View 9 Replies
View Related
Apr 24, 2006
I am using pivot tables which were created by another (no longer contactable) and have found two fields in the field list which are not part of the source data i.e. neither are column headings but are used in the pivot table.
My questions are:
1. How are these field created?
2. How can I examine these fields for formulae (as I have found one of them returns an incorrect value)?
Field1 return a numerical value which is the difference between two columns
Field2 shows this as a % (but incorrectly)
View 4 Replies
View Related
May 31, 2007
My fixed asset software will not allow me to show multiple individual months of acquisitions. I can export each month. This will create a separate spreadsheet for each month, but the problem is that each spreadsheet may contain the same asset, but additions to that asset.
Spreadsheet 1
....Description............................Dept...................January acquisition
.....Building____________________Plant______________1,000,000
Spreadsheet 2
.....Description..........................Dept...................February acquisition
......Building___________________Plant______________1,000,000
.....Welder____________________Metal_________________5,000
What I want is this
Spreadsheet 3
.....Description.........................Dept..................January Acq..........February Acq
......Building__________________Plant____________1,000,000__________1,000,000
......Welder___________________Metal_________________________________5,000
View 4 Replies
View Related
Nov 20, 2010
I have some source data which is used to generate a pivot table. The data is conditionally formatted to color certain cells based on some other values. Once the data is transferred to the pivot table this formatting (as well as the number formatting) is lost.
I have found some code to fix the number formatting issue but can't seem to locate something similar to set the interior color of the cells in the pivot table to match that of the original source data.
View 2 Replies
View Related
Aug 8, 2013
I have a pivot table whose data source is located on a shared network drive. Each day a new data source is uploaded and the only thing that changes is the date in the filename (ie. DataSource080813.xlsx). I am trying to find a way to set the data source to update with todays date automatically each day so that when you open the workbook it is always current days data. I have a cell (B2) with a formula in it that gives me the file location of todays file (ie. X:TeamFolderFile1DataSource080813.xlsx, where the date is derived using the TODAY() function. Is there a way to set the pivot table data source to cell B2 and have it use the text from B2 as the file location?
View 1 Replies
View Related
Dec 31, 2013
Trying to create a basic pivot table from a CSV file for our users. What I've done in the past is open my CSV and then take the option Insert > Pivot Table to create the pivot table from the open CSV/worksheet. My question here is .... how can I save this .XLS and refresh the CSV data within? Or do I need to use an external data source? I don't want to have to use any drivers. I'd love to be able to just point to a CSV or TXT file on our server and that be that.
For something else I have used Web Query strings to point to .php scripts that send back data in XML format. Is this an option?
Again, the goal is for me to create a pivot table and just have our user's open it up and have current/refreshed data within. We can run jobs overnight or on-demand that update the data source.
View 1 Replies
View Related
Jan 7, 2009
I would like not to have to update the source data for the pivot table in my database. I've read that you can solve this by using a Dynamic Named Range and using that as the source for the pivot table. That way the pivot table will expand as new data is added to the database. The formula I used to create the DNR is:
View 7 Replies
View Related
Jul 17, 2009
I wish to hide some columns that contain data used to update a pivot table in another worksheet. What I want to know is though, will this affect the pivot table? I think that graphs in excel will normally ignore data in hidden cells, so I was wondering if it was the same with pivot tables.
View 2 Replies
View Related
Sep 7, 2009
Given a pivot table, is there any way that I can determine the source data that was used to create the pivot table?
I suspect that the pivot table was created using only part of the data, but I'm not sure.
View 9 Replies
View Related
Apr 14, 2011
if it's possible to break the connection between a pivot table and the data source whilst still maintaining the data in the table? I could try copy/paste special/paste values but thought there migth be a 'proper' way to preserve the data.
View 8 Replies
View Related
May 22, 2014
I noticed that when I click on a cell in my Pivot Table a new worksheet pops up with the requested information (essentially a filtered version of my data source depending on what cell I clicked) is there a way for that information to appear on the same worksheet as my Pivot Table? And if so can I also edit what parts of the data source appear?
View 1 Replies
View Related
