Loop To Increment Column Width Of Range Of Columns?
May 22, 2014
I'm trying to use the following loop to increment the column width of a range of columns thus:
Code:
NewWidth = 0
WidthIncrement = 0.5
For MyCount = 1 To 26
NewWidth = NewWidth + WidthIncrement
Cells(1, MyCount).EntireColumn.ColumnWidth = NewWidth
Next
If I set WidthIncrement to be an integer value, the code works correctly. If, however, I make it something like 0.1, all the column widths that the loop acts on are set to 0. I suspect it's something to do with how I'm declaring the NewWidth and WidthIncrement variables - they're currently set to Double. I know that I can have decimal values for column widths (e.g. 8.43)
View 5 Replies
ADVERTISEMENT
Jun 28, 2006
I have a range of cells which I wish to print to a .txt document. However, I would like these cells to stay aligned, one on top of the other. I am currently doing that by finding the cell with the widest piece of data for each column, and storing the width that each column needs to be to an array of integers. Then, when printing out the range, I simply add spaces to each piece of data its width is the same as the max column width. I am finding the max column width using the following loop:
'find the width for each column and store in col_width()
For cur_col = 1 To total_cols
'skip the tag switches column
If cur_col <> 3 Then
max_data_width = 0
For cur_row = 1 To total_rows
cell_data_width = Len(Find_String_Diagnostics(diagnostic_range.Cells(cur_row, cur_col)))
If cell_data_width > max_data_width Then.................
View 5 Replies
View Related
Apr 15, 2013
I have a number of strings in adjacent columns in the same row, like so.
Coulmn1 Column2 "blank" Column3
If the cell is blank I want to hide the respective column .
I'm guessing the code will roughly take the form of the code below with an if statement nested in a for statement.
Sub (test)
With Range("BD22")
For i = 1 To 10
if range (i,22) = "" then hide
else don't hide
.Offset(1, 0).Formula
Next i
End With
View 1 Replies
View Related
Jan 10, 2007
I am using this code to create onsheet user form and populate a spreadsheet db
'Step 1 : store the information in every second row in DBsheet
Set rngDataOut = Worksheets("Database"). Range("A65536").End(xlUp).Offset(2, 0)
'Step 2 : Post the current results
rngDataOut.Range("A1") = Now()
rngDataOut.Range("B1") = Range("B1")
rngDataOut.Range("C1") = Range("B2")
rngDataOut.Range("D1") = Range("B3")
rngDataOut.Range("E1") = Range("B4")
'Step 3 : Clear current Selection
Range("B1") = ""
Range("B2") = ""
Range("B3") = ""
Range("B4") = ""
my question is how could I modify it with for-next loop because the form will be with more than 50 entries.
View 2 Replies
View Related
May 24, 2012
Is it possible to adjust a cells' column width without the whole column width changing? EXAMPLE...I'm looking to lock rows 1-41 at certain column widths and change the column width as needed from rows 42 and below.
View 4 Replies
View Related
Feb 19, 2007
I'm trying to download stock price history inside a loop and move the destination range over one column for each new symbol. I want to keep moving the results from the query over one column each time it loops through....
View 4 Replies
View Related
May 3, 2014
i want a code to adjust the column A:Y from width
View 9 Replies
View Related
Feb 7, 2008
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies
View Related
Jul 6, 2013
I have tried and been searching but cannot find the answer. Is it possible to change the row height and column width for only a selected range in my spread sheet, for example, F13:I23? I am using Excel 2010.
View 2 Replies
View Related
Feb 24, 2009
For Next Loop increment. simple For-Next Loop:
View 2 Replies
View Related
May 31, 2007
I want to test a condition and if false skip the rest of my for block and hit the next for:
For something = 1 to 100
if test = "false" ?NEXT FOR?
code
code
code
code
Next
I can set a lable at the Next and use a goto but that seems kinda kludgy.
View 10 Replies
View Related
Jan 9, 2012
What would be a good way to increment each of my ranges for example I need x to copy Range B11:to G20 and paste it to C10 for the second loop. Each Variable has different increments.
I'm horrible with Visual Basic.
Sub Macro5()
'
' Macro5 Macro
'
Dim i As Range, j As Range, k As Range
Dim x As Range, y As Range
Dim Num As Integer
[Code]....
View 1 Replies
View Related
Sep 11, 2007
I am experimenting one way to solve one problem, but to do this I have to Name some cells with some values, thing that normaly in VBA is symple but I have never done before in coding. May be my problem is because what I am doing is not valid with the vlookup but if you can take a look to my file. The problem is that when I run the Macros the Named Cells are totaly out of place...
Sub Lookup()
dercell_unit = Range("C65500").End(xlUp).Row
Range("B" & dercell_unit, "E2").Select
Set Rango = Range("B" & dercell_unit, "E2")
For i = 2 To dercell_unit
Names.Add "VALrsa", "=$C" & i
Names.Add "RESOLdds", "=$D" & i
Cells(i, 7) = Application.VLookup(Cells(i, 2), Rango, 4, False)
Next i
End Sub
View 3 Replies
View Related
Oct 11, 2007
I try to select a range with a counter, but cannot find how to do it.
My aim is in the following loop to select the range ("B,i:V,i").
B and V are the colum, i is the counter that marks the row number, counting from 8 to 16.
Sub Copy()
For i = 8 To 16
Sheets("DB2").Select
If Cells(i, 7).Value <> 0 Then
Sheets("DB3").Select
i = i - 1
Cells(i, 2).Select
'this is the cell that should be a range ("B8:V8") to ("B16:V16"), as the counter goes from 8 to 16
i = i + 1
Selection.Copy
Cells(i, 2).Select
ActiveSheet.Paste
Application.CutCopyMode = False
Else
End If
Next i
End Sub
the Sub works with a cell, can somebody please tell me how to turn the cell in the range?
View 9 Replies
View Related
Oct 11, 2011
Make a loop where I can increment the row number and execute the command where I set the formula?
View 1 Replies
View Related
Nov 21, 2013
I have the following code that rearranges the data based on the values in the first column (cannot post attachments). Currently, the code is grabbing the whole columns when performing cut and paste and with larger sets of data I am getting "Excel cannot complete this task with available resources" error. Need to modifying the code so it only grabs the used range as opposed to the whole columns.
Code:
Sub ArrangingColumnsByNumber()
Dim Count As Long
Dim CurrentNumber As Long
Dim CurrentColumn As Long
Count = 1
CurrentColumn = 1
CurrentNumber = Cells(Count, CurrentColumn)
[code].....
View 4 Replies
View Related
Sep 4, 2012
How can i make blank columns be certain width using VBA... I need to do this because the data that is populated in a sheet will be different every time i need the blank columns to be certain width.
View 2 Replies
View Related
Nov 17, 2012
1. Is there a faster way to adjust the size of the columns? I had to use my mouse to stretch the column out. This can be quiet time consuming if there are 8 columns needing to adjust to the same size. ie Col A, B,I, J needs to be the same size.
2. Can Excel determine the best size for the column? Say I need a column with data saying "yes" and "no" and a column for the letter "X" only or do I have to stretch the width of the column myself?
View 1 Replies
View Related
Sep 19, 2012
I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
View 1 Replies
View Related
Dec 2, 2013
I am having a small problem with microsoft excel 2007.the problem is that: my excel 2007 cannot display tooltip of the column width when I keep and drag left mouse
Show tooltip of the column width as attached file.
I also tried many ways to find settings of advance menu. But cannot.
Pic.jpg
View 2 Replies
View Related
Jan 13, 2010
I'm looking for a macro or function/formula to list & total a range of column widths. Having lots of columns with varying widths t'would rather not have to do it manually from each column's Properties.
View 9 Replies
View Related
Mar 7, 2008
I am trying to create a loop in which the code "reads" ... lets say... cell F5. Determines if cell F5 = 1. if not, it moves on. only, instead of moving to cell F6, it moves to cell G5. so i need to add one to the column letter. How is this best achieved? having trouble with this. adding a letter to it concatinates them, and adding numbers, well its a mismatched type so that simply does not work.
View 3 Replies
View Related
Oct 6, 2013
I have just been sent a strange file, which I have attached, on its only sheet columns "A" and "B" have data entered in them, but they are not visible. You can access them if you select column "C" and use the left arrow key, but all attempts at unhiding and changing the column width are fuitless.
I have tried selecting the ENTIRE sheet, then Home>Format>Unhide Columns but it does nothing I try selecting the entire sheet, then Home>Format>Column Width and setting it to something, like "20", but again it is fruitless.
I even tried using a macro in the "Immediate Window" to ask Excel whether the columns are hidden (by using "?Columns(1).Hidden" and it returned "False") then I used a similar macro ("Cells.EntireColumn.ColumnWidth = 12.75") and again - nothing! :O
View 3 Replies
View Related
Mar 21, 2014
I built a Microsoft Access database for my church to track member information. I was able to import a lot of the needed information to create the records for each individual and household easily. What I can't do is import their offering donations until it is "Normalized." Which means that I need each row to be 1 record with the fields listed as the column headings. My church has a spreadsheet with several sheets one of which is named Input. I've attached the desensitized file for you to view/play with.
What I need to do is loop through the input sheet and find all the values in range B:4 to GN:387 that are greater than zero or not null (I believe they entered the default as zero so their other calculations would work). Then I need those values to be transferred to the column labeled Offering Amount on the ImporttoAccess sheet. Somehow I also need to define three variables associated with the cell that is contains a value greater than zero.
1. I need the row heading value for the envelope number (Column A of input sheet) which intersects with the amount
2. I need the column heading value (3 field merged) for the date (Row 1 of input sheet) which intersects with the amount
3. I need the column heading value (labeled: GenFund, WLA, or Missions) for the designation of the offering (Row 2 of input sheet) which intersects with the amount
Each of these I need to attach to the value offering amount and insert into their corresponding column fields for that record. I have entered 2 example rows of data into the ImporttoAccess sheet for you to see what I am after. I am sure it's possible since the data is there, But how to go about it.
View 4 Replies
View Related
May 18, 2009
I need to fixed width-text to column macro and found a reply in the forum.
However, when I apply the macro, the result of zeros in front of figures disappear since the format of value in splitted column doesn't predefined as text
e.g. sample text to split to column:
000122042009ABCDEFG00567
Required result:
0001|22042009|ABCDEFG|00567
when running below macro; result shows:
1|22042009|ABCDEFG|567
(Beginning zeros figures of the first and last column disappear)
Applied Macro:
View 3 Replies
View Related
Jul 22, 2009
I'm trying to create a vb to get all columns on my sheet to have a fixed width.
If I run my sub all columns go back to the set width. But I want the width to reset when the width is changed.
View 2 Replies
View Related
Jun 5, 2012
I want to fill a listbox with n columns so there is no space other than the text in it.
I have tried this:
listbox1.columncount = 2
listbox1.columnwidth(len(activecell.text);len(activecell.offset(0,1).text))
Or:
mystring = len(activrcell.value) or refer to the excel column width
listbox1.columnwidth(mystring;mystring2)
but I get an error message.
Or max of list len or something. The default width is to big and specifying the length could make it to small.
View 1 Replies
View Related
Dec 17, 2012
I set a column width to some integer like 10, and the next time I open the file it has changed to something like 9.89. Is there some configuration that prevents this from happening and leaves my setting alone?
View 4 Replies
View Related
Jul 22, 2007
I'm creating a map like image with Excel, and I've set the column width and row height to certain dimensions. Now I'm entering in some text into them, and I noticed that when I added in 2 digit numbers, the column width expanded a little bit. I want to prevent this from happening, and still be able to enter in the 2 digit text (since it WILL fit, and it's expanding to keep that extra bit of space).
Is there any way to lock the dimensions?
View 7 Replies
View Related
Aug 6, 2009
the Ruler across the top that allows you to adjust the column widths (A B C D etc). Is it possible to insert another Ruler, further down the same page, to allow you to adjust the column width differently. if so how. On Excel 2007
View 2 Replies
View Related
