I want to test a condition and if false skip the rest of my for block and hit the next for:
For something = 1 to 100
if test = "false" ?NEXT FOR?
code
code
code
code
Next
I can set a lable at the Next and use a goto but that seems kinda kludgy.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies View RelatedFor Next Loop increment. simple For-Next Loop:
View 2 Replies View RelatedWhat would be a good way to increment each of my ranges for example I need x to copy Range B11:to G20 and paste it to C10 for the second loop. Each Variable has different increments.
I'm horrible with Visual Basic.
Sub Macro5()
'
' Macro5 Macro
'
Dim i As Range, j As Range, k As Range
Dim x As Range, y As Range
Dim Num As Integer
[Code]....
I have a number of strings in adjacent columns in the same row, like so.
Coulmn1 Column2 "blank" Column3
If the cell is blank I want to hide the respective column .
I'm guessing the code will roughly take the form of the code below with an if statement nested in a for statement.
Sub (test)
With Range("BD22")
For i = 1 To 10
if range (i,22) = "" then hide
else don't hide
.Offset(1, 0).Formula
Next i
End With
I am experimenting one way to solve one problem, but to do this I have to Name some cells with some values, thing that normaly in VBA is symple but I have never done before in coding. May be my problem is because what I am doing is not valid with the vlookup but if you can take a look to my file. The problem is that when I run the Macros the Named Cells are totaly out of place...
Sub Lookup()
dercell_unit = Range("C65500").End(xlUp).Row
Range("B" & dercell_unit, "E2").Select
Set Rango = Range("B" & dercell_unit, "E2")
For i = 2 To dercell_unit
Names.Add "VALrsa", "=$C" & i
Names.Add "RESOLdds", "=$D" & i
Cells(i, 7) = Application.VLookup(Cells(i, 2), Rango, 4, False)
Next i
End Sub
I am using this code to create onsheet user form and populate a spreadsheet db
'Step 1 : store the information in every second row in DBsheet
Set rngDataOut = Worksheets("Database"). Range("A65536").End(xlUp).Offset(2, 0)
'Step 2 : Post the current results
rngDataOut.Range("A1") = Now()
rngDataOut.Range("B1") = Range("B1")
rngDataOut.Range("C1") = Range("B2")
rngDataOut.Range("D1") = Range("B3")
rngDataOut.Range("E1") = Range("B4")
'Step 3 : Clear current Selection
Range("B1") = ""
Range("B2") = ""
Range("B3") = ""
Range("B4") = ""
my question is how could I modify it with for-next loop because the form will be with more than 50 entries.
I try to select a range with a counter, but cannot find how to do it.
My aim is in the following loop to select the range ("B,i:V,i").
B and V are the colum, i is the counter that marks the row number, counting from 8 to 16.
Sub Copy()
For i = 8 To 16
Sheets("DB2").Select
If Cells(i, 7).Value <> 0 Then
Sheets("DB3").Select
i = i - 1
Cells(i, 2).Select
'this is the cell that should be a range ("B8:V8") to ("B16:V16"), as the counter goes from 8 to 16
i = i + 1
Selection.Copy
Cells(i, 2).Select
ActiveSheet.Paste
Application.CutCopyMode = False
Else
End If
Next i
End Sub
the Sub works with a cell, can somebody please tell me how to turn the cell in the range?
Make a loop where I can increment the row number and execute the command where I set the formula?
View 1 Replies View RelatedI'm trying to use the following loop to increment the column width of a range of columns thus:
Code:
NewWidth = 0
WidthIncrement = 0.5
For MyCount = 1 To 26
NewWidth = NewWidth + WidthIncrement
Cells(1, MyCount).EntireColumn.ColumnWidth = NewWidth
Next
If I set WidthIncrement to be an integer value, the code works correctly. If, however, I make it something like 0.1, all the column widths that the loop acts on are set to 0. I suspect it's something to do with how I'm declaring the NewWidth and WidthIncrement variables - they're currently set to Double. I know that I can have decimal values for column widths (e.g. 8.43)
With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long
[Code]....
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
I want to take the date value of a cell, add one day to it and paste it to another sheet's cell. For example if Sheets("x").range("i4").value is 12/12/1999. I want to add a day to it (13/12/1999) and then paste it to Sheets("y").range("d3").value
View 4 Replies View RelatedI have a sheet with the column for time the format should be h:mm:ss, the time begin with 0:00:00 and 10 sec periods 0:00:10 ...until 50sec again in the next count wud be 0:01:00 again 10sec periods.. How to write the Macro, that automatically increse the values of minute (mm)if the ss attains 60 and increment the hour(h) value if mm get 60.
View 2 Replies View RelatedI want to write formula in cells(many cells!) using concatenate. The desired output:
In Sheet2!D1 - i will write concatenate of Sheet1!C6 and Sheet1F6
in Sheet2!E1 - i will write concatenate of Sheet1!C7 and Sheet1F7
in Sheet2!F1 - i will write concatenate of Sheet1!C8 and Sheet1F
Copy and paste formula would not do so i created a macro stated below. The problem is a can not change the ActiveCell.Formula correction.
I have a table... One of my cells is called Capacitors and the number of the cell is 202600. This is the default value. How can i increment this value?
For example:
I have capacitors in one cell with this value => 202600.
But I want to put capacitors in another cell and i want the value to be 202600 + 1 => 202601
Another cell with capacitors with 202600 + 2 => 202602
And so on...
Capacitors.JPG
I currently have a spreadsheet that parses a HL7 message string using "|" as a delimiter. The String that comes before the first "|" becomes the sheet name (Segment). The code executes on each line of the string (Each segment is parsed). The problem is that sometimes there are multiple segments with the same name. So instead of a new sheet being created, all segments are lumped into the same sheet with that name. What I am trying to do is have the code create a new sheet for each segment and if there it is already present, add sheet name with an incremented number.
So given the sample message The MSH, SCH, PID, PV1 etc sheets are fixed. The DoHL7Parsing routine takes the line and parses it out in the existing sheet. The problem I'm having is lines that are the same such as AIP get lumped into one sheet. What I would like to happen is have AIP1,AIP2,AIP3,AIP4,AIP5 and AIP6. Each with the line parsed out. These are parsed by segment not fields. I want to be able to recognize the existing sheets and create new sheets if multiple segments with the same name are being parsed.
Sample Message:
MSH|^~&|SR|500|CL|500|20140804150856-0500||SIU^S14|5009310|P|2.3|||AL|NE|USA
SCH|10262|10262|""|S14^(SCHEDULED)^L|44950^APPENDECTOMY^C4||^^^201408081345-0500^^^^^^2||30|
MIN^MINUTES|^^^201408081345-0500^201408081415-0500|10000000034^ROISTAFF^CHIEF^O||||||||
PID|1|5000|50^^^USVHA&&0363^NI^FACILITY ID&500&L^^20140804~666^^^USSSA&&0363^SS^FACILITY
[Code] ........
Current Code:
Option Explicit
Const HL7_DELIMITER_FIELD = "|"
Const HL7_DELIMITER_SEGMENT = vbLf
Sub DoHL7Parsing(sMessage As String)
Dim vSegments As Variant, vCurSeg As Variant
[Code] .........
I have a value in cell P1 and is always -ve.
This value is calculated by some tedious calcualtion in some other part of the sheet.
By entering value in Cell P2, the value in cell P1 will progress towards +ve number.
What i want is a formula or Macro to increment the value in Cell P2 by 0.01
until value in Cell P1 becomes +ve...
Below is the example of my manual calculation.
When i have
P2=0 P1=-23.58
P2=0.01 P1=-14.78
P2=0.02 P1= -9.30
P2=0.03 P1= -2.92
P2=.04 P1= 1.05
Since i have achieved P1 to be positive, calculation should stop with value in P2=0.04
I have to do this for 31 column and hence manually doing it takes long time
I have a formula that I'd like to have increment by one, but I can't figure out how to do it.
Here's the formula:
=IF(INDIRECT("'Supervisor'!B"&ROW()-4)="Y",E12-D12,IF(INDIRECT("'Supervisor'!B"&ROW()-4)="N","0",IF(INDIRECT('"Supervisor'!B&ROW()-4)="","0")))
I'd like to have the -4 in the equation increment to -5 when I paste it to the next row without having to fix each one of them.
I have a input worksheet and in this user have to manually enter the sequence no. The sequence no. heading is not always in one cell that can be in any between any cell from D14 to D21.
I need some code which start the sequence no. with 1 and everytime I click add button. It find the sequence no. in range between D14: D21 and add 1 in the relavant adjacent cell (which can be in from E14 to E21).
See Table below
Start withColumn DColumn ERow No. can be any from 14 to 21Sequence No.1Clicked AddDesiredColumn DColumn ERow No. can be any from 14 to 21Sequence No.2DesiredColumn DColumn ERow No. can be any from 14 to 21Sequence No.previous val +1 and so on
The question that I have is as follows:
For i = 17 To FinalRow Step 14
'Select cells to examine based on For/Next loop Step...
Cells(i, 4).Activate
'Check for "value"...
If ActiveCell = Press Then
[Code]...
The "Cells(i, 4).Activate" statement steps my search criteria forward by the value of "i." The last thing that I want to do with this macro is to increment the value of A4, "Range ("A4").Select" and D6, "Range ("D6").Select" by the value of "i."
How do I increment a cell by 1 when data in another cell is changed. In other words...I am logging phone calls made. When I enter the date I made a call I want a cell labeled "times called" to increase by one.
View 9 Replies View RelatedI would like to have a drop down list for cells in a row - say B1:I1.
Firstly, having the list (with only 2 selections) in these cells to place either an "A" or a "0" (zero) in a cell.
Next, if an "A" is added then a selection of a "B" or a "0".
If a "B" is added then a selection of a "C" or a "0". etc etc
If the "0" (zero) is selected and placed in the row then no more alpha but just the next number "2" available to select only then a "3" etc etc.
These would be added from left to right ie: A to H or 1 to 8.
I might be able to do this with a long formula but problem is there are 100's of rows. Maybe VBA would be more efficient?
i have created a form that links to other sheets in my book but can't get the info to stay when goto enter next lot of info.
i've been told about incrementing it but i can not work it out
I'm trying to increment a link to a file in my macro by 1 after each row. For example:
Row 1 "<a href="/ ai/grtcon/06-07-q2/gc1_e.html">
Row 2 "<a href="/ai/grtcon/06-07-q2/gc2_e.html">
Row 3 "<a href="/ai/grtcon/06-07-q2/gc3_e.html"> and so on...
I've indicated in the code in the first array where the increment should go (I'm not sure if it belongs in the array).
Option Base 1 ' sets first array element to 1, not 0
Sub makehtmlGrtCon1()
'Dimension all variables.
Dim DestFile As String
Dim FileNum As Integer
Dim ColumnCount As Long
Dim RowCount As Long
Dim LastRow As Long
Dim LastColumn As Long
Dim OpnTags As Variant
Dim ClsTags As Variant
' Array defines html tags to be used before each cell.
OpnTags = Array("<tr class=""size-smaller"">" & vbCrLf & " <td><a href=""/ai/grtcon/06-07-q2/gc" & INCREMENTHERE & "_e.html"">", _
" <td>", _ ...................
I have inherited a Spreadsheet/Data Base.
In my Worksheet I have 3 Headings: Contractor Supplied/Installed; Principal Supplied/Contractor Installed; Principal Supplied/Installed. Each heading has 10 rows below. In the Rows, spread over merged cells (inherited remember), are 3 columns:Item description; No. off & Remarks. When I print this I get an A4 sheet with 30 Rows and perhaps only 2 items in one of the Headings.
What I want to do, is to have initially 2 empty Rows per Heading shown. Then after entering data in Column A, Row 1, another Row automatically inserts below the empty Row.
I envisage there is always 1 empty Row. If that is possible I can minimize the use of paper and have 6 Headings on 1 sheet.