Macro To Close One Excel File And Open Another?
Jul 18, 2014
I have created several excel files as I cannot open them all at once since they are too large. So I have to open one excel file whilst closing another.
part1
part2
part3
part4
part5
I want a macro that opens the excel file part 1 and part 2. Then it should close part 1 and after closing part 1 it should open part 3. Once part 3 is open, part 2 should be closed and when part 2 is closed part 4 should open. When part 4 is open, then part 3 should be closed and part 5 should open.
View 1 Replies
ADVERTISEMENT
Aug 16, 2008
I need to open about 2000 documents one at a time, and save them with a different name.
they are a mix of word documents, PDFs and .jpg pictures.
some VBA like:
Open.file strPath & nextfile
where strpath = C:Temp
and nextfile = picture01.jpg
What should the line be? or is it more complex than a single line ?
View 9 Replies
View Related
May 16, 2014
I have a folder which has a set of files (Files may be anything like excel,pdf,word..etc).My rrequirement is: When i run the macro the first file to last file should open and wait for 5 sec and then close..I mean first time the first file should open and wait for 5 sec and close..Next 2 nd files shoul open and close after 5 sec..next third files should open and close after 5 sec...Like wise till last file..Is this possible to achive through macro code..
View 7 Replies
View Related
Mar 8, 2013
I have a macro that opens all workbooks from one directory and runs a macro for each workbook to clean up the data. I cannot figure out how to take all those open workbooks and save them to another directory and close the workbook. Also, I do not want the macro workbook (xlsm) to save. I only want it to close. I am working in 2007 Excel.
View 8 Replies
View Related
Jan 16, 2009
When i open excel it give an error and it close. My computer up to date about office upgrades. And i try to repair my office but it doesnt solve my problem.
View 7 Replies
View Related
Jun 3, 2014
Below is the code to open a csv file and paste it in the workbook "ResultFile". When i click on a button, a csv file will open to copy the values and paste it in "Resultfile". Now, i want to close the csv or excel file to be closed once copying has done.
where to put the close file.
[Code] ....
View 2 Replies
View Related
Feb 1, 2010
I am working with a bunch of files to do a dashboard. I have the main file which shows end results and what my users will see "Dashboard". I have about 10-15 files which I export weekly from MS Access. and I have the "Dashboard Data" file. In this file I have a sheet which links all the information for the files exported from MS Access. In here I have named ranges and dynamic ranges plus additional columns created to look up information in other tables. I use this file as my source data for my Dashboard File so that I can reduce the size of the actually dashboard. Dashboard Data file is about 5.5 mb and my Dashboard is 300kb. I have 12 branches that need to view the data over a radius of a hundred miles so the smal file are better.
My problem: I can get the Dashboard Data file to update without opening all the 10-15 other files. I cant however make the Dashboard file update without opening the Dashboard Data file. I have it to auto update without prompting but its still tells me that it cannot update. I was wondering if there is some VBA code I could use that would work like this:
I open the Dashboard File, Dashboard Data file opens so that Dashboard file updates and then close Dashboard Data File so that the user never has to see the Dashboard Data file. I dont want them to see it or have access to it.
View 11 Replies
View Related
Feb 21, 2013
I opened a file, by file I mean a "file" with no extension that has commas separating it.
So I recorded a macro to open up the file and this works fine.
How do I close it? I tried
wk1 = ThisWorkbook.Name 'Main Worksheet
...
Workbooks(wk1).Activate
ActiveWindow.Close
But the problem is that "wk1" is not set equal to the name, probably because the file is not an excel file, it has no extension.
View 2 Replies
View Related
Feb 25, 2009
I need to check if a .txt file is open. If yes, need to close it.
View 9 Replies
View Related
Jul 28, 2007
I am trying to write VB code that upon opening an excel spreadsheet a message box appears that the user must read, than select yes or no. If select yes than the file will open, if no the file closes or does not open. Here is what i have tried - it doesn't work.
Sub Auto_Open()
YesNo = ("Are you sure you want to open?",vbYesNo + vbExclamation,"Will")
If_vbYes Exit_Sub
If_vbNo_Close
End Sub
View 9 Replies
View Related
Feb 27, 2010
How can I put a VBA script to wait for 30 seconds, then close the Excel file (w/o saving it) which its name is stored in CSV_file_name variable, then re-open it?
View 9 Replies
View Related
Nov 6, 2011
I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
View 3 Replies
View Related
Sep 3, 2009
I want to put in an if-then statement in a macro that will check to what kind of report i open so it will automatically know what to do with it. Where do I put that macro? I tried it in auto_open in my personal.xlsb file but it stops before the file actually opens.
View 9 Replies
View Related
Jan 5, 2014
I am an extreme novice to using macros.
I used the 'record macro' feature to create the following: I created a rectangle box on sheet1 of NEW TEST.xlsm to link to the macros incidated below. Niether macro moves on after reaching the Workbooks.Open statement.
I am at a loss. Is there something in Excel that needs to be set? Is there something else that I need to do version of Excel is 14.0.6129.5000 (32 bit) MS Office Professional Plus 2010
What I am trying to accomplish is this: From 'NEW TEST.xlsm', open an excel file on the network, add a new sheet to this network file, calling it 'Pivot'. Then create a pivot table in this new sheet from the data in sheet data1 of this same network file. Then move control of macro / processing back to the NEW TEST file. Eventually I will do more, but for starters, I cannot even get the macro to add / name a new sheet in the network file.
[SIZE=3][COLOR=#000000][FONT=Arial]PS I have attached the NEW TEST.xlsm fikle as we as the data file. NOTE: the data file has been reduced to one day's worth of data, to to the upload file size.Also, my Excel Trustred locations has "Allow trusted locations on my network" checked, and the network location to the data file in trusted user locations.
VB:
Sub Open_Add_Sheet()
Dim filename, filelocation As String
Dim wb As Workbook
filename = "11 Nov, 2013 GDO AHS Agent Productivity Report.xls"
filelocation = "R:acharukAHS ReportsGDOGDO CSR ACTIVITY Report2013" & filename
Set wb = Workbooks.Open(filelocation) '
' Open_Add_Sheet Macro
[Code]....
View 9 Replies
View Related
Feb 24, 2009
I wanted to run a batch file which does something like,
Dir /b >Test.csv
Start Test.csv
And then runs an Excel macro once the workbook is open.
I looked into this and discovered that it’s not really that possible to run an excel macro through batch file but other options were to use ‘Workbook_Open’ etc.
I thought this might cause problems because Test.csv doesn’t contain a macro to auto open and because csv’s usually don’t like macros.
I do however have personal.xlsb which opens every time if that helps.
View 6 Replies
View Related
Oct 19, 2012
I just need a macro to open any excel file may be 2003, or 2007 from a folder.
I did tried Dir but not working. I want the macro in 2007.
View 4 Replies
View Related
Sep 7, 2008
How to supress Enable Macro option while open a excel file. I would like to do it using VBA in Macro of excel 2007 + versions.
View 9 Replies
View Related
Aug 6, 2013
I use the following code to open an existing open workbook in a new instance of Excel...
Everything works fine... What I would like to do is close (when I say close I mean, completely exit/quit the application). I'm not able to do that, the original Excel instance stays open with no spreadsheet open. I would just like it force the application to quit so that after running the code I would just have one Excel instance open (with the desired workbook, which works fine now)...
Public Sub Re_open_workbook()
Application.DisplayAlerts = False
ThisWorkbook.Save
[Code].....
View 1 Replies
View Related
Feb 16, 2010
I have a folder containing 40 single sheet excel workbooks and I would like to automate following tasks:
- Open each excel file (need to open the file so as to update it since it gets the data from another workbook through =formulas)
- Copy paste as values
- Save this as excel html in the same folder as original excel files (keeping the original file name)
- Close (original excel file should not be changed ie formulas should remain in place, only the html file will contain values)
- Since there will always be xHtml files with same name need the macro to replace the excisting file
My abilities with excel are limited to functions, no VBA knowledge other than finding ready codes and pasting them in the module.
Since this routine is to be run almost daily the macro should run all files, instead of one by one.
I just hope that I am not asking too much for excel to handle and I hope that explanation is clear.
View 9 Replies
View Related
Sep 9, 2013
Its been a while since I did this on 2003 and needing a pointer on 2007.
Just needing a simple macro that opens the relevant folder from a hardcoded path to allow the user to manually select the file to be used.
This file will then be used to copy from and paste to another file.
View 8 Replies
View Related
Jul 27, 2012
I have a problem where Excel 2010 is deleting one of my conditional formatting conditions. I do not know if it is deleting it on open or close. I just know that I enter the conditional formatting, save the workbook, close the workbook, reopen the workbook, and it is gone.
The other conditional formatting conditions (simple "Cell is Blank") are left intact.
Setup:
Cell with conditional formatting is on sheet "MyRecord" at "$E$7". A corresponding boolean value on separate sheet "Data" and must be referred to by using "OFFSET" with a record locator value (workbook level named range "RecordLocator") that leads to corresponding data row, so looks like following:
Code:
=IF(OFFSET(Data!$D$5,RecordLocator,0),TRUE,FALSE)
When I configure this, it works great until I save and close the workbook. When I reopen the workbook, this particular conditional formatting is gone with all other conditional formatting left intact.
I've tried using the actual range address in place of range name "RecordLocator", changes nothing.
I can't figure out why Excel deletes this particular conditional format.
View 3 Replies
View Related
Mar 14, 2014
I need to have a workbook (all of them in a folder, ideally) refresh in the middle of the night. The file is large so the refresh takes a full minute. I know I can't auto refresh a closed workbook (pretty sure anyway), and I can't leave the workbook open for various reasons.
So I'm thinking I could have a macro in an open excel (it kicks off on open) that will open a particular workbook elsewhere (the one I need refreshed), open it, refresh it and close/save it. Ideally it would do this for the entire group of workbooks in the folder but I'd be happy to start with just one. I would like to set it to occur every twelve hours (so at midnight, say, this would occur - I would just have to leave the workbook with the macro in it open on a computer so that it runs and completes this task every night).
View 7 Replies
View Related
Nov 13, 2011
I am relatively new to writing script in excel. I have a 34 sheet workbook that includes inputs, intermediate calculations and then reporting outputs.
I am trying to write macros to do the following
1. On opening - all sheets except a contents page (with macro buttons on it) are hidden
2. One of the macros on this page will unhide all sheets (i.e. a 'developer mode')
3. One of the macros will unhide all relevant input and reporting sheets (i.e. a 'user mode')
I originally set up macros to run on workbook opening that hid all sheets except the contents page and this was working but ran into trouble when I opened up the 'User Mode' saved my changes and exited - the macro didnt work when I went to open again (I think because some of the sheets were visible and some werent and it was trying to hide sheets that were already hidden).
To counter this I set up a macro that made all worksheets visible on workbook closing - this works except I keep getting a 'Save' prompt from excel because the location of selected cells (or the sheet I am viewing) has changed from last opening (not to mention the inputs may change).
I am thinking the best way to fix this as follows:
1. Keep the opening macro the same
2. Keep the user/developer macros the same
3. On closing - develop a macro that unhides all sheets after the user has selected whether or not they have made changes to the sheet in a pop up message box - if they choose yes then they are prompted to save as and then the macro to hide all sheets runs on the new version - if they choose no then they are not prompted to save the document (i.e. next time they open they will be opening back at the contents page with the same inputs they started with in the previous session).
View 1 Replies
View Related
Feb 11, 2013
I'm on excel 2010 and I have a small group excel files I open everyday. Most of the files are static in name and location. I've got a macro created to open those files, which works fine with workbooks.open and the file path.
There are two report files I want to incorporate into my macro of workbooks to open. The files are created weekly and the files names have the following format: "Report Name (YYYY-MM-DD).xlsm". I don't want to use the file's last modified date because older files may get edited after the more recent ones are created. The files are also not always created on the same day, so the solution needs to be flexible enough to not refer to a specific day of the week or anything.
Macro open an excel file based on the latest date found in filename.
View 9 Replies
View Related
Nov 10, 2009
I wrote this code to open an excel file when a button is pushed. I also have another piece of code to close the excel field when another button is pushed. The problem: the code to close the excel only works on my computer. There is no error message, but the file doesn't not close on others' computer. Can you please advise on a solution?
View 7 Replies
View Related
Sep 18, 2009
I have an existing spreadsheet with a column of strings (actually VIN numbers). These numbers correllate to a bunch of text files, that can exist in one of three folders (UsernameDesktop1, 2, or 3) on my desktop. What I need the macro to do is:
1) get the filename from A2 (A1 is a heading row)
2) Find the appropriate text file in one of the three folders
3) Put the folder name into I2
4) Scan the text file for some strings, and copy some data that follows those strings into J2:O2 (I can handle programming this)
5) Close the text file
6) repeat above for the remainder of filenames (about 1800 files)
View 3 Replies
View Related
Oct 18, 2008
I want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
View 5 Replies
View Related
Mar 11, 2014
I call it from a macro. It is supposed to write some temporary files, and close them in the end, and delete them. Sometimes, the dll can't close properly, and the text files remain open.
With error treatment in my macro, I can continue execution, but i need to delete that files.
Since the dll DOES NOT CLOSE the files, i'm not able to delete them in my macro.
I need some way to close that files, in order to delete them.
When I use GetFile to reference the file, it remains as "File", which does not accept "Close" method. I can reference the file with myfile.OpenAsTextStream, but this way it seems to me that the file is opened again, and the "Close" method does not work either, with the file defined as a TextStream object.
If I close excel, I'm able to delete those files, but that's not the way I want. Since IT'S OPEN IN EXCEL PROCESS, I imagine there's some way to close it.
View 1 Replies
View Related
May 23, 2008
I am trying to open an Excel file that was emailed to me in zipped file that requires macros. When it asks me if I want to enable macros it gives me an error and will not open. Is there a setting I need to change?
View 5 Replies
View Related
Feb 11, 2014
I need a VB code to open excel files located in a path (fixed path) by providing a part of file name through a input box
for ex: I have some files located in my local drive as below
1. colurgreen.xls
2. colurred.xls
3. colurblue.xls
I need a input box asking for file name and I input "green" or "red" or"blue" and it should open the resp file.
View 4 Replies
View Related
