I'm adding a menu selection to the right-click menu that you get for cells. I can add and remove the menu option but, when I try to execute the macro tied to the menu, I get "the macro...cannot be found". I can't figure out what appears to be a "pathing problem". I'm sure it's simple but...
Here's the
I have created a sub to add new controls to the "Cell" shortcut menu. Can I remove the standard "Cell" shortcut menu controls? if so how do you do it?
[Code] ......
I have a workbook with multiple sheets. Is there a tool that creates a menu bar or code that I can add that would support navigation?
My goal is to have something with approximately 4 options (buttons?). They would link to 4 different sheets that serve as indexes within the workbook.
I know I can add a control like a button to a given sheet that would take the user to given sheet when clicked, but can I make the button 'float' above all the sheets, or add to a menu bar, or something? I just don't want to have to add the button to every sheet in the workbook.
I am looking for something simple/easy, and am not looking for anybody to do the work. I just have no idea on how to approach the problem.
I have a column with various drop down menu boxes and I need to add another selection to the menu list. My problem is, it's been so long since I did the drop downs, I have forgotten how to do it..
View 3 Replies View RelatedI have actually got the Window menu in the Main Menu Bar of excel deleted using below command.
Application.CommandBars("Worksheet Menu Bar").Controls("Window").Delete
Now this is something which I dont even know if it can be done, but its something which I would use, a lot. When clicking on a button, like a normal button from the control toolbox, is it possible to open a menu from this? So I click on the button i made called "accounts" and this opens a menu next to it with different options.
View 5 Replies View Relatedmy worksheet menu bar is displaying the ' Chart' menu no matter what I do. Not only do I have no charts in the workbook, (verified this by: )
For Each ws In Worksheets
ws.Select
MsgBox ActiveSheet.ChartObjects.Count
Next ws
but adding worksheets, selecting various parts of a worksheet, creating a chart and deleting it, and everything else I've tried has no effect.
One interesting thing - the first chart I added (to test if it would 'unstick' itself upon deletion of the new chart) was named 'Chart 2', implying there was a chart1 that existed previously.... although I am fairly certain I never added a chart to this workbook at any point.
Also, the menu bar is working fine in other workbooks, and changes to chart and back to data like normal.
Suppose I delete a (unknown) number of items from the Worksheet Menu Bar. This can vary because of the fact that my excel sheet is being used by a different number of people, all with a different Worksheet Menu Bar configuration. Is there a way of counting how many Menu items are still left in the Worksheet Menu Bar?
So, suppose all that is left (after using the program) in the Worksheet Menu Bar are Excel, File, Tools, Help. How can the porgram find out that there are only 4 items in the menu?
I am taking an EXCEL(online) class and in my current assignment i am to create a 'list' for sorting and querying. However i cannot find the 'list' option, under my DATA option on the toolbar. I have tried all my toolbars and shortcuts but I am unable to find it anywhere.
View 9 Replies View RelatedI have made an excel addin named "INDNUMFOR" and want that this should display under "Data" of main menu bar. thus, a new item (sub menu) should appear naed "IndNumFor" under Data main menu.
View 9 Replies View Relatedi have 2 macro icons.
i want to disable the icons after its clicked once.
I have several pre-configured macros that I would like to choose from using a drop-down menu. I know this is possible within the excel built-in ribbon, but I need to have it only in the spreadsheet. The macro will be importing a csv file. I have several different csv files that I need to be able to choose from and a drop-down list seems to be the best choice. The other option could be to have the macro prompt me to select the csv file of choice. Below is a sample of the macro that I would be using. Is this possible?
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;P:A Harvest of HealthImportVendorsA-N.txt", Destination:=Range( _
"$N$1"))
.Name = "A-N_7"
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
.RefreshStyle = xlInsertDeleteCells
I am wondering if there is any code to SELECT (DESELECT) A MENU ITEM using VBA? I have an Excel Add-in program installed, which adds a Menu "Easycal" to my Excel menu bar. Under "Easycal" (drop down list), I have the following items:
Refresh workbook
Refresh worksheet
Turnoff Easycal
I am using "Easycal"'s functions in various cells of my sheet "Final". When I select "Refresh worksheet" from "Final", "Easycal" fetches (or calculates) me the data from the "Easycal" database. I have a macro (on "Final") that pulls together data from other sheets of the same workbook. I there anyway to include a code in my existing macro, so that when I run the macro, the following are completed in sequence:
1. Select "Turnoff Easycal" menu item
2. Run my existing macro (to pull the data from other sheets to "Final")
3. DeSelect "Turnoff Easycal" menu item
4. Select "Refresh worksheet" menu item
I have written two VBA programs around the same time. Both run on open and pull external data and create graphs. My problem is that I want the end user to be able to run the report multiple times by choosing the name of the macro from the Excel macro menu (i.e. Tools>Macro>Macros) but only one of the workbook macros shows up on the menu. why the other macro is not visible on this menu???
View 2 Replies View RelatedI need code that will let me activate and inactivate a custom menu bar macro when the user leaves/reeturns to the workbook the menu is for. Example: in workbook A (with a cutsom menu bar), the user inputs data, but needs to check or edit workbook B (normal menu bars). I want the menus to go back to normal when the user activates Window WorkbookB. When finished there, and selecting Workbook A, I want the custom menu macro to run again. I already have create/delete code. Would the solution be some type of If Then in the Sheet Code?
View 3 Replies View RelatedI am trying to make this code works by Toggle botten in Mymenu.
when i press the toggle bottun the copy takes place, then move the curser to distenation and press the Toggle again to past only the comment.
How to make the Toggle bottun inside Mymenu (A menu in the Worsheet Menu Bar).
Sub Macro1()
' Selection.Copy
Selection.PasteSpecial Paste:=xlPasteComments, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Application.CutCopyMode = False
End Sub
I've recorded a macro that copies an entire tab into a new spreadsheet then goes on the copy and paste information from one tab to another.
When I run the macro from the Tools>Macros menu it works perfectly.
But when I copy the code and add it to that of a button it fails and posts the following error: Run-time error '1001': Select method of Range class failed.
The first attachement shows the code for the macro as it is alone, and the second shows how I simply copied and pasted it into the 'view code' window of the button.
Needless to say I'm a beginner at macros and only every record them, I can usually make stuff work that way but this has me stumped!
I have a validation drop down menu with the 12 months in it on Sheet 1. User picks the current month from the drop down list. I have 12 macros in the workbook, one for each month. Based on what month the user selects from the drop down, I would like to run a specific macro. The macro hides specific columns on sheet 2 of the workbook.
for example...user picks May from drop down which triggers macro MAY to run. If user picks Jun next month, macro JUN will run.
fyi...I'm using Excel 2010.
I wonder if it is possible to make a macro that right clicks a cell and then chooses a option from the list?
View 11 Replies View RelatedI used the following to create menu's and run macro.
http://www.ozgrid.com/VBA/custom-menus.htm
The menu is only avaliable in the excel file it was created with.
I want it to be avaliable for ANY file that I open, even if I create a new excel file. I would like to have access to my menu's.
Can I make a drop down list only available if another cell contains a Yes.
example :
A1 has a Yes/No drop down list by data validation
If A1 = yes then B1 gives the option of another Yes/no drop down list. If A1=No, or blank, then B1 has no menu option.
I am using Excel 2000
I have recently opened a file sent to me, and since closing it my Edit menu does not work properly when I open any existing files or start a new file
The problem is with Copy, Cut Paste and Paste Special, when I click on the Edit menu they are all greyed out, also if I right click they are also greyed out
Obviously the file I opened has changed some settings, how do I re-set this
Within the 'tools' menu option you have 'Macros'. On a standard tool bar you have the option to record a new macro, edit......, however sometime last week I created a custom button and placed icons on my tool bars that allowed me to click them to record new or run custom made macros. After a clicking the 'custom macro' buttons a few times by mistake, I decided to remove the custom buttons in the hope of returning the macro options (within the 'Tools' menu option) back to normal. However this has not been the case. Now I have no option to record a new macro the the 'tools' menu system.....it has disappeard. Please could someone tell me how I can reset the 'Tools' menu system back to normal?
I am using the following code to build and remove a menu on the menu bar. how to modify this to create sub menu's instead of a single drop down list
View 2 Replies View RelatedI have some code that loads and unloads a command under the "DATA" menu bar. Is it possible to add an item to the menu bar and put the commands under the new menu item? For example: Add "XYZ Consulting" as a menu bar item so it would like as follows: File, Edit, Insert, Format, Tools, Data, Window, XYZ Consulting.
View 5 Replies View RelatedI have created an item on the menu bar (called “Personal Macros”) to run a number of macros in a spreadsheet. Under the menu bar I am trying to create two ControlPopups (called “Grouping Preference 01” and “Grouping Preference 02”).
For each ControlPopup, I am trying to add Control Buttons to the right, which will run the macros assigned. For Grouping Preference 01, add Macro 1 and Macro 2 as control buttons. For Grouping Preference 01, add Macro 3 and Macro 4 as control buttons
I have code to create the new menu, add popups, and add control buttons but it is not working as expected. The current code is placing all four macro control buttons under the same ControlPopup. I want the control buttons for macros 1 & 2 under one popup and the control buttons for macros 3 & 4 under another popup.
i had a play with a document that contains a custon menu bar and now the menu bar is always there.
the code that puts up the menu bar is ...
I have set up a menu bar and I want to run two macros. The code I am using for some reason is only running one of the macros. I can't figure out why the other one will not execute.
View 2 Replies View RelatedI can weld together a bare chassis, or a complete turn-key car, or anything in between. With that I am putting prices next to every option, and part n piece that goes on the chassis. This is fine when I choose welded chassis under car type and just add a few options to it.
However if I choose turn-key or even roller, there are items that i need to choose between like rear coilover manufacturer and what not, but I dont need to add that price in considering its already included in the turn-key price of $135,000.00
So my question is, if I choose bare chassis, can I leave everything the same, but if I select turn-key, can I make it so it does not include that price in the bottom total cost of the car?
I would like to create a print menu similar to the one located at http://www.landlordsoftware.com/jpg/printmenu.jpg
build the print menu and set up the appropriate code to do so? I have more sheets than the sample linked.