I have a column with various drop down menu boxes and I need to add another selection to the menu list. My problem is, it's been so long since I did the drop downs, I have forgotten how to do it..
View 3 RepliesHi guys i am in assistance of your brilliant brains, i have a working drop down menu which when selected i can select my data range such as below: ...
View 6 Replies View RelatedI have created a drop-down menu combobox of districts and depending on your choice of districts the list of Health Centers in each district changes. What I want to do is to protect the contents of the cells that contain the health centers. The problem is that when I lock the cells and I choose a district, the Health Center cells cannot change because the cells are locked. Is there anyway around it?
I have attached the sample (Please look at sheet 2. The column that I want to block is the column FOSA)
Attached is the file i am working with. The table spanning from A:AA5:16 contains hours worked per day of the week with respect to the Project chosen from the drop down menus in A7:16. Cells in the range of F,K,O,R,U,X,AA7:16 total those hours worked on a daily basis. The table below should sum the total hours worked per day according to the Project selected in A19 from the drop down menu, with respect to the Project(s) chosen in cell range A7:16. For example, if i am looking for total hours worked Monday on Project RSB i select "RSB" from the drop down menu in cell A19, i want cell F18:19 to be the sum of cells A7 and A9, with respect to the Project selected from cells A7:16. If I select "FRG" from the drop down in cell A19, i want cell F18:19 to reflect the sum of cells F8 and F10.
View 2 Replies View RelatedI can weld together a bare chassis, or a complete turn-key car, or anything in between. With that I am putting prices next to every option, and part n piece that goes on the chassis. This is fine when I choose welded chassis under car type and just add a few options to it.
However if I choose turn-key or even roller, there are items that i need to choose between like rear coilover manufacturer and what not, but I dont need to add that price in considering its already included in the turn-key price of $135,000.00
So my question is, if I choose bare chassis, can I leave everything the same, but if I select turn-key, can I make it so it does not include that price in the bottom total cost of the car?
I have created a sub to add new controls to the "Cell" shortcut menu. Can I remove the standard "Cell" shortcut menu controls? if so how do you do it?
[Code] ......
I have a workbook with multiple sheets. Is there a tool that creates a menu bar or code that I can add that would support navigation?
My goal is to have something with approximately 4 options (buttons?). They would link to 4 different sheets that serve as indexes within the workbook.
I know I can add a control like a button to a given sheet that would take the user to given sheet when clicked, but can I make the button 'float' above all the sheets, or add to a menu bar, or something? I just don't want to have to add the button to every sheet in the workbook.
I am looking for something simple/easy, and am not looking for anybody to do the work. I just have no idea on how to approach the problem.
Looking to get a "X" to appear in appropriate box "in leave request form tab, cell M14, modified PTO box" that corresponds with correct selection from drop-down menu "in leave calendar tab, cell K6"... if i select "modified PTO from the drop down selection in K6, i would like to see a ""X" appear in "leave request tab, cell M14", then i can apply the formula to the rest of the selections in the drop -down...
View 5 Replies View Relatedhow to create a drop down menu and grab data from the other side. pls have a look for a while at my attachment to check it...has anybody can provide me the steps
View 12 Replies View RelatedI'm looking for cell j3 to add up al the things in row 3 so in the attached case it will come to £3.00 ....
View 9 Replies View RelatedI have another question with my red sox scores excel sheet. On my overview I want to be able to select any team, and view the indiviual stats against them. For the life of me I dont' know/can't find how to even do a simple yes no if statment to what the value in the drop down menu box is.
View 3 Replies View RelatedI want to make a drop down menu whereby each choice in the drop down would re-calculate my workbook.
Let me explain:-
I want to make a drop down menu in sheet 1 with 3 choices.
The 3 choices come from sheet 2 (row 1, column A, B, C).
I have data in sheet 2 in rows 2 through to 6 in columns A, B, C.
I have sheet 3 that currently uses the data from sheet 2 row 2 through to 6 for column A.
I want to be able to use the drop down menu in sheet 1 to choose either column A, B, or C in sheet 2 and then re-calculate the data in sheet 3 accordling.
I have the drop down menu made now.... but how can i re-calculate the values in sheet 3 after choosing a choice in the drop down?
If I change the country in cell B2, I would like to have that the cells D2, E2 and F2 show the same name as cell R2. (This is always the first option of the drop menu's)
Cells D2, E2 and F2 are made by using the validate option in order to get drop down menu's.
The source information is in the hidden columns I-Z.
So for example:
if I change cell B2 to Belgium, I would like to see that D2, E2 and F2 also show Belgium immediately. I can then select the place I want to move from Belgium to by using the drop menu in D2 (for exampla Belarus).
As I selected for D2 Belarus, this has to be shown in E2 and F2 also.
I can now select E2 (for example Austria).
If Austria is selected in E2, I want to see this also in F2.
To recapitulate:
If I select Belgium as starting place, I want to see in movement 1,2 and 3 also Belgium, as there hasn't been anymovement yet.
If I let my army go from Belgium to Belarus, I want to see for the two remaining movements Belarus (as this means that the army remains in Belarus)
If I let my army go forward after Belarus to Austria, I want to see in the last movement phase Austria (no movement). If I still want my army to move I can still adapt it.
I've attached the xlsx file with this post. Now I've created a drop down menu with the 3 values I want to choose from. These values refer to the table situated directly above the drop down menu. Basically, in the end I need to calculate a 'Throughput' value which is supposed to depend on what I choose in the drop down menu.
For instance, if I choose 'Paddy' in the drop down menu, I want the corresponding bulk density and velocity values selected (same row). Similarly for the adjacent table, if I choose model 400/180 in the drop down menu, I would like the corresponding bucket capacity to be selected. I know my question is rather lengthy, but I'm sure the solution is rather concise. I just can't seem to remember or search for the solution!
I have setup a worksheet with multiple drop down menu's, all with different available options to choose from. If I go to the 1st drop menu and select say option 2, is there a way I can assign a dollar value to option 2 so that when I select that option, it posts the dollar value next to the drop menu? Then go to the 2nd drop menu select say option 4 or whatever, and do the same with the value.
That way at the end of the list of drop menu's I have a total of what the options that I have chosen for this particular piece to have and have a running total of what it costs?
To get the drop menu's I just listed a bunch of options for question 1, then went to data, validation, list, and selected those options. Then did the same and so on for other options.
I do a lot of horse racing ratings in Excel, in fact its the only way I do the form these days.
The thing is I'm always looking for ways to save time and was thinking the other day about how I enter the results.
I would like to have "drop down menus" for each of the place getters that I get from another sheet in the workbook.
Is there a way to do this? I'm using excel 2007 (which I love)
Race 1 sheet is named race1 and have up to 24 horses/names to pick from
How do I create drop down menus in a spreadsheet?
View 4 Replies View RelatedI'm adding a menu selection to the right-click menu that you get for cells. I can add and remove the menu option but, when I try to execute the macro tied to the menu, I get "the macro...cannot be found". I can't figure out what appears to be a "pathing problem". I'm sure it's simple but...
Here's the
I have actually got the Window menu in the Main Menu Bar of excel deleted using below command.
Application.CommandBars("Worksheet Menu Bar").Controls("Window").Delete
Now this is something which I dont even know if it can be done, but its something which I would use, a lot. When clicking on a button, like a normal button from the control toolbox, is it possible to open a menu from this? So I click on the button i made called "accounts" and this opens a menu next to it with different options.
View 5 Replies View Relatedmy worksheet menu bar is displaying the ' Chart' menu no matter what I do. Not only do I have no charts in the workbook, (verified this by: )
For Each ws In Worksheets
ws.Select
MsgBox ActiveSheet.ChartObjects.Count
Next ws
but adding worksheets, selecting various parts of a worksheet, creating a chart and deleting it, and everything else I've tried has no effect.
One interesting thing - the first chart I added (to test if it would 'unstick' itself upon deletion of the new chart) was named 'Chart 2', implying there was a chart1 that existed previously.... although I am fairly certain I never added a chart to this workbook at any point.
Also, the menu bar is working fine in other workbooks, and changes to chart and back to data like normal.
How to create a dropdown menu to pick from two selections?
Basically, I have a 'Status' column and the status will always be 'Open' or 'Closed' and I'd like you just to be able to click a cell in that column and select one or the other.
I’m trying to do now is I have a drop down menu that allows me to pick any team that we can face in the season. Once that is chosen what I want to show is the individual stats against that team. Now right now I’m just trying to work out the formula to see if it works.
The formula itself is half working. For some reason some of the selections aren’t showing up like there suppose to do.
I am doing an internship in Germany, and I have this crazy project with Excel. I am not very familiar with all the equations.
I want to select a company name and a type of container from a drop down menu, and have the information show up on a different sheet assigned for that specific company for the right size container. It involves quantities.
I will attach what I have sofar.
Ladungstraeger(1).xlsx
Ladungstraeger(2).xls
I have some code to create a personal menu drop down to execute macros, which is a follows:
View 2 Replies View RelatedI have several pre-configured macros that I would like to choose from using a drop-down menu. I know this is possible within the excel built-in ribbon, but I need to have it only in the spreadsheet. The macro will be importing a csv file. I have several different csv files that I need to be able to choose from and a drop-down list seems to be the best choice. The other option could be to have the macro prompt me to select the csv file of choice. Below is a sample of the macro that I would be using. Is this possible?
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;P:A Harvest of HealthImportVendorsA-N.txt", Destination:=Range( _
"$N$1"))
.Name = "A-N_7"
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
.RefreshStyle = xlInsertDeleteCells
I am building an excel application that will allow the users to tick boxes which acknowledge completition of tasks. I then count up all the tickboxes to give them a score. However, I want to have multiple modes, so users can have different sets of tickboxes. Ideally, I would have a drop-down menu/ combo box at the top of the page with the 4 modes in, and then when selected the appropriate tick-boxes are shown. I considered creating 4 tickboxes in every location, and just showing them (object.hide/.show) when the option was selected in the combo box. I am currently using Excel Form Tickboxes, and counting themall, but if I did this method I would need to count them for each mode. would I need an array?
View 2 Replies View RelatedWhat I am trying to do is to put a drop-down menu in a sheet which has all the names of the sheets that start with A, C and P?
Does anyone know how I would go about this?
im trying to create a drop down menu that changes depending on the results of a vlookup. example: I have a vlookup function that populates a field with a product name based on the part number, however in some cases there are multiple products with the same part number. is there a way to create a drop down menu that contains all the product names shared by the same part number based on the part number that was entered?
View 1 Replies View RelatedI need to put together a report for work.
What I want to do is this:
Create a drop menu. The options within the drop menu to be links (either to another Excel worksheet within the same workbook, or a WORD document).
I know how to create a drop menu, that is simple, but am not sure how to do the hyperlink aspect.
It seems when I actually insert>hyperlink onto the actual text of the drop menu (on the other sheet where i created the drop menu data), the hyperlink is not active in the actual drop menu itself.