Move Page Down 10 Rows - Sometimes
Nov 27, 2009
I have cobbled together bits of code from around this forum to do what I need (thanks to all those I stole from!) but I'm stuck on the last bit.
I have a spreadsheet and the user types into an input box what they are looking for and the cursor moves to that position.
If the data is initially off the page when it is returned it is on the last row of the page I now see. Sometimes it may be appropriate to see data below it.
Is there anyway the found cell can always be shown about half way down the viewable page? (so that about 10 rows below are seen - obviously if the data is at the top then no movment is needed)
I tried the "ActiveWindow.SmallScroll Down:=10" but hit problems where the data was on a higher screen than the last search.
I am using excel 2000
View 9 Replies
ADVERTISEMENT
Mar 26, 2006
I suddenly can't adjust my page breaks in any Excel spreadsheet while in Page Break Preview. Is there some option to turn it on and off?
View 7 Replies
View Related
Oct 16, 2013
I have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.
View 4 Replies
View Related
Jun 17, 2014
I have been using the below macro that has worked a treat, however I need it to copy as value as when it moves over some of the formulas and links go a little funny.
[Code] ......
What amendment I would make so that it pasted special as value?
View 1 Replies
View Related
Apr 9, 2014
My OS is Windows 7. My version of Excel is 2007. I have read how to get a macro to move around a page in a relative way, but is there a way to move from page to page in a relative way as well?
View 5 Replies
View Related
Jun 9, 2009
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies
View Related
Aug 28, 2007
I have a worksheet in which I have sorted the data based in date and numbering (column I and E). I would like to create 2 macros for following actions:
1- all rows with the value "TOM" in column C will have to be deleted.
2- all rows with a value of 601 or 602 in column E, will have to be moved to the bottom of the sheet after the last row with data. The rows that have been moved will have to be sorted based in date (column I) and numbering (column E).
View 2 Replies
View Related
Jan 19, 2010
I've got an excel file with over 20,000 rows with Column A being having values of a "Vendor Number" while Column B has a "Vendor Name" Here is an example:
Vendor #Vendor Name
1001ABC Supply
1002Larry, Moe, Curly Inc
1003John Smith
1004Fred, Wilma, Barney LLC
I'd like it to find the rows where the Vendor Name has a comma present, and then put it in another sheet, or in another column like column C and D. If I can't get both the Vendor # and Vendor Name re-inserted someplace, that is OK. The Vendor Name is the big one.
View 2 Replies
View Related
May 24, 2007
I have 3 columns and 200 rows. The first column is for Name of product. 2nd column for number and 3rd for $value of number of products. Have 200 rows. Have done a sort and checked. 2 sets of rows are for the same product name. I want to know if it is possible to add up values in 2nd and 3rd column, 2 rows at a time , then 4th and 5th column and so forth, by some formula rather than doing it manually?
View 4 Replies
View Related
Jun 14, 2009
[Solved by Myself]
.ActiveSheet.HPageBreaks(1).location.row
View 2 Replies
View Related
Feb 20, 2009
I have macros that then run through and hide all unnecessary questions and paste the selection to another work sheet.
what i need next is the issue.. Because the questions vary in size ( row height) and include blank cells for comments, i can not come up with a macro to print with any conformity
What i have come up with is that after all this is said and done, i would like a macro to print only 32 rows per sheet ( portrait) , then have a page break.
View 9 Replies
View Related
Nov 1, 2009
I am making a project in which there is vast data of around 10-15 pages to get print...but due to vast data its not possible to get all printed in 1 pages...So i want that cell A1:K4 & A47:K53 to get print in every sheet...Header and footer is not posisble due to some logo at the end of the page..is there anyway for such printing option...
View 9 Replies
View Related
Jul 12, 2014
I have a sheet that data is imported into that is normally no more than 300 rows. I need to insert 2 blank rows after each page break. My problem is the row height is not always the same when the data is imported. How to insert 2 blank rows after each page break using a macro.
View 3 Replies
View Related
Jan 26, 2009
in my file i have rows/columns a1:z50. now my requirement is that rows as header a1:a3, as footer a47:a50 and columns a:c to be printed in every page.
View 9 Replies
View Related
Nov 16, 2012
I have an Excel sheet with several thousand rows. Now I want to create a report using this Excel file such that when I print the Excel File it must be limited to a specific number of row for instance 100 rows per page and at the bottom of that page I want Excel to display the sum of the above 100 rows for one single column. If I do this manually it would take hours therefore I want either a Macro for this or some shortcut to achieve what I am looking for.
View 1 Replies
View Related
Jul 1, 2009
I am having issue setting up an analysis page for a report that I have. I am trying to find out for each individual what are the currently working on, completed, and the average time it took to complete. I have the data but it is in the following format:
NameStartedDone
Julie24-Jun27-Jun
Tom24-Jun
Julie24-Jun27-Jun
Julie24-Jun
Ken24-Jun27-Jun
The way I need the data appear with the name above with the data below as shown below.
JulieTom
Working11
Complete2-
Avg Time3-
I am having issue because the data isn't setup in a column format. Also the data list is constantly growing so I want it to be something that can update itself so I am not constantly updating the report.
View 10 Replies
View Related
May 29, 2013
Is it possible to use the resize function in Excel VB to select all rows that are between 2 page breaks.
I have a worksheet with several pages of data. Each page is separated by a page break at the top and bottom of the range, each page can consist of any number of rows from 20 to 50. I need to look for a specific criteria in column A in each of these pages. If the criteria is met, then I need to delete that page.
For example, if the cell where the criteria is met is A50, in page 2, and the page break above this is at row 45, and the one below is at row 55, then delete rows 45 to 55
I have the code that finds the criteria in column A. I tried to use the offset and resize functions but as there isnt always a consistent number of rows involved this didnt work
If this isnt possible, can you refer to page numbers in excel, so if the criteria is found in pages 4, 7 and 10 of the data then these pages are deleted?
View 2 Replies
View Related
Jun 1, 2013
I have a TAB Named: Sheet18. I already set up the Header rows to print at the top of every page. Now I need to know how to set up to print the Footer at the Bottom of every-page the footer is A4804:Z4806, i need this rows printed at the bottom of every page when i print.
View 1 Replies
View Related
Mar 2, 2014
Note: Split from: VBA to insert page breaks at a blank with varying blck size
I would like my macro to add empty lines to each pages not completely filled. (you know when it removes a block from a page, there's always some free space at the bottom of that page) Is it possible to add blank row (from a certain template on another sheet that I have) until it's full?
View 9 Replies
View Related
Feb 27, 2007
I have a report that shows 3 lines for each item. Is there a way to group sets of 3 rows together so they print on the same page so that it would insert a page break either before or after each set of 3 rows, not between them.
View 9 Replies
View Related
Sep 30, 2006
I'm trying to print populated rows from 5 different worksheets. I can get them to print out onto 5 different sheets of A4 but would ideally like them to print underneath each other (continous and use less paper) as some times one sheet may only have one populated row.
Application. ScreenUpdating = False
Dim printer1 As Range
Dim printer2 As Range
Dim printer3 As Range
Dim printer4 As Range
Dim printer5 As Range
Sheets("xxxx").Select
Set printer1 = ActiveSheet.Range("a9", Range("i65536").End(xlUp))
Sheets("xxxx").Select
Set printer2 = ActiveSheet.Range("a7", Range("i65536").End(xlUp))
Sheets("xxxx").Select...............
View 2 Replies
View Related
Apr 16, 2008
I want to add a button on my Worksheet that will basically copy the last portion of the sheet (about 40 lines) and insert it at the bottom of the sheet (above the button). Each time the button is clicked, the last 40 lines will be copied and pasted. The script also sets the page break to the appropriate line. To achieve this, I've set up a hidden sheet that contains the line numbers and last page number. The script accrues these numbers every time the script runs.
I realise there may be a better way to do this, but at this point I'm trying to stick to what I know. I'm trying to use the function Row().Select, and I keep getting an Error 13. Example of my
Sub AddPageTest()
Sheets("SetPoint").Select
Dim CopyRows As String
CopyRows = Range("C13").Select
Dim InsertRow As String
InsertRow = Range("C14").Select
Dim SelRange As String
SelRange = Range("C12").Select
Dim LastPageNum As Integer
LastPageNum = Range("C5").Select
Dim NewLastPageNum As Integer
NewLastPageNum = LastPageNum + 1
Dim LastPageBreak As String
LastPageBreak = Range("C15").Select
Dim NextPageFirstRow As Integer
NextPageFirstRow = Range("C4").Select + 1...................
View 2 Replies
View Related
Oct 14, 2006
I've got a rather simple question. I need a code which would activate a cell which is located 10 rows down from the currently active cell. I found this piece of code
Sub move()
ActiveCell.End(xlUp).Offset(10, 0).Activate
End Sub
but somehow it does not do the job it is supposed to do.
View 3 Replies
View Related
Dec 18, 2013
I am working with the attached sheet and it is made up of groups of rows that alternate with a 6 digit NAICS code (industry code) then an aggregation of those codes into a more general 3 digit NAICS. I need to have the row with the 3 digit NAICS code calculate a number that multiplies a column called "% of industry" by several columns of of numbers and then sums the result into a cell in that 3 digit NAICS row. Different groupings have different numbers of rows. I would like to know if there is a 1 cell formula that can achieve this and be easily copied down the sheet to the other 3 digit NAICS rows.
You can see in row 37 this formula being executed for a simple 2 row aggregation. But that would take forever to replicate down the sheet, especially for the larger aggregations.
An example for row 32 that achieves the desired result and could be easily copied down the sheet.
3 digit Table.xlsx
View 5 Replies
View Related
Jul 1, 2008
how to reference cells in 1 page from another and understand basic formula's, and would appreciate any input on how or if i can acheive what i'm trying to accomplish.
I have a worksheet with say 100 rows of information, it is a list of materials to go into a construction job. the columns to the right of the description calculate volume/quantity etc and produce a cost for the item. what i want to do is have a summary page that only lists the items that are being used, not all 100 items are in every job and i dont want to have to print the whole list with a bunch of empty values, which will just waste paper and ink. I'd like to enter a value in a cell or setup a check box or something that i could somehow use to then list that row or a part of that row of information on a seperate sheet, for a nice concise, easy to read list of job materials. i would like to do produce 1 sheet with the cost associated with the item, and one without cost.
View 9 Replies
View Related
Jan 10, 2007
I have a sheet that holds my inventory and has 3 colums. The colums are serialnumber, techid and date. I also have a sheet for each techid. Is there a way to delete/move a row of data if the serialnumber is entered on another sheet.
example.
I have a serialnumber added to my first sheet. I go to a techid sheet and enter that same serial number. Is there a way to copy the entire row the same serialnumber is on and copy to the current sheet? Possibly a search function where I enter a serialnumber and it finds the same thing on the main sheet and copies the rows into the current sheet.
View 9 Replies
View Related
Aug 11, 2013
I need a way to move every 7 rows into columns.
So rows 1-7 become columns 1-7, rows 8-14 into columns 1-7 etc.
View 3 Replies
View Related
Jun 18, 2014
I'm trying to adapt a macro written elsewhere on this forum for my purposes. I need to move 127 rows of data into one row. The macro written does exactly what I would like, except that it only works for 3 rows, rather than 127. How do I get this to work?Here's what I have so far:
[Code].....
View 3 Replies
View Related
Aug 26, 2008
We run reports from active directory to see user accounts that have not been logged into the network between 30 and 90 days. We have a few spreadsheets within a workbook (Investigate, Disable, Delete, No Action). All user accounts are imported into the investigate spreadsheet. What we would like to do is automatically take predecided accounts (service accounts that we do not log on to the network - only meant for services, etc) and move them from the investigate spreadsheet into the No Action spreadsheet. These accounts all start with svc. Generic accounts start with GEN and so on....
View 14 Replies
View Related
Sep 21, 2009
I am trying to create a macro the looks at column A and moves the entire row to another worksheet or deletes the entire row based off of the value in each cell. Right now I have the Macro replace the downloaded values to either AG, G, GI, ICP, IMG or delete. The idea be to move all of the values with AG in column A to the AG worksheet, move G to the G worksheet, etc.. and then delete all of those with delete in the cell.
View 14 Replies
View Related
