I have 3 columns and 200 rows. The first column is for Name of product. 2nd column for number and 3rd for $value of number of products. Have 200 rows. Have done a sort and checked. 2 sets of rows are for the same product name. I want to know if it is possible to add up values in 2nd and 3rd column, 2 rows at a time , then 4th and 5th column and so forth, by some formula rather than doing it manually?
View 4 RepliesI have a table which contains a list of branches eg;
01
02
04
06
I then have a spreadsheet which contains a number of columns and rows.
I want to create a new spreadsheet in the first column it will contain the branch from the table above then the rows and columns in the above spreadsheet
The rows and columns would then repeat for each of the other branches in the table. IE if I have 4 branches in my table and 100 rows in my spreadsheet my new spreadsheet would contain 400 rows
I have raw data stored in one row which I would like to break up into four individual rows.
I cannot get the formula to repeat and I don't want to manually do it.
I have a worksheet in which I have sorted the data based in date and numbering (column I and E). I would like to create 2 macros for following actions:
1- all rows with the value "TOM" in column C will have to be deleted.
2- all rows with a value of 601 or 602 in column E, will have to be moved to the bottom of the sheet after the last row with data. The rows that have been moved will have to be sorted based in date (column I) and numbering (column E).
I've got an excel file with over 20,000 rows with Column A being having values of a "Vendor Number" while Column B has a "Vendor Name" Here is an example:
Vendor #Vendor Name
1001ABC Supply
1002Larry, Moe, Curly Inc
1003John Smith
1004Fred, Wilma, Barney LLC
I'd like it to find the rows where the Vendor Name has a comma present, and then put it in another sheet, or in another column like column C and D. If I can't get both the Vendor # and Vendor Name re-inserted someplace, that is OK. The Vendor Name is the big one.
Is it possible to repeat rows on top of every page but one? Specifically, I have a seven page spreadsheet and I don't want the rows to repeat on the seventh page.
View 6 Replies View RelatedI have a spreadsheet that contains traffic count data for a two lane road. The data is by direction, by hour, 24 hours a day, 365 days a year so the data is basically 2X 365 = 730 rows of data.
I need to simply add the two directions together for each hour of each day, basically add two rows together, drop down to the next two rows and add them together, repeat.
I need the result as stand alone data on another spreadsheet so the Data, Subtotals operation provided by Excel won’t work for me but something similar that puts the data on another spreadsheet would work.
I also tried to use a formula in the new spreadsheet that added two cells in two rows on the original spreadsheet together and then repeated that process a few times and then tried to drag the formula down but couldn’t get it to repeat correctly.
This macro is recorded, but I need it to start on row 2 and repeat down to row 3000. What changes do I need to make.
I have a list of rows with Yes and No check boxes. Columns "T" and "U" contain the output of these checkboxes (i.e. "TRUE" or "FALSE"). At the end I have a button which I'd like to run this code. Essentially, I want to code to go through row by row and do the following:
1. Check to see if both boxes are blank or if both boxes are checked - and if so set the background color to yellow
2. Otherwise set the background color to clear
I have written the following code which accomplishes this task for Row 9. Is there an easy way to repeat this process for rows 10-15 without copying all the text and changing the row numbers?
Then, any way, say "If all the rows (i.e. 9-15) have clear background colors (which would mean that they all 'passed' the test of having exactly one and only one box checked in the row), then run another macro which I have written"?
Rem Check to see if neither box is checked or if both boxes are checked and sets background color to yellow, otherwise sets background color to clear.
If (Range("T9").Text = "") And (Range("U9").Text = "") Or (Range("T9").Text = "TRUE") And (Range("U9").Text = "TRUE") Or
(Range("T9").Text = "FALSE") And (Range("U9").Text = "FALSE") Then
Range("B9", ("G9")).Interior.ColorIndex = 6
Else: Range("B9:G9").Interior.ColorIndex = 0
End If
I am trying to drag a numerical value down (X4-X10) but I need it to repeat two rows in between and simultaneously keep the numbering in sequence only after the repeats 2 rows in between . So far, I have to manually enter or when I select cell X4 and X5 together ( having a value of 1 and 2 respectively) and drag, the value does not repeat 2 rows in between and does not keep the numbering in sequence after the 2 rows.
At Present:
X4 1
X5 2
X6 3
X7 4
X8 5
X9 6
X10 7
I need to have
X4 1
X5 1
X6 1
X7 2
X8 2
X9 2
X10 3
X11 3
X12 3
and so on
I have a 2000+ rows to manually input and hence it is not practical!.
I have data in rows like this
A B C
1 x y z
2 x y z
3 x y z
4 x y z
5 x y z
6 x y z
7 x y z
8 x y z
9 x y z
10 x y z
11 x y z
12 x y z
What I am looking for is that I want to repeat the rows after every third row in another column. For eg
A B C D E F G H I
1 x y z x y z x y z
2 x y z x y z x y z
3 x y z x y z x y z
how to get it to fill down. Basically depending on the contents of column D, a formula (which also needs to fill with the rows) is copied from sheet 2 in to column K.
Code:
Sub Copy()
With Sheets("sheet1")
typ = .Cells(Rows, Count, "D").End(x1Up).Row
[Code]...
That's what I have. I am totally stuck. the formula needs to relate to column G and fill down too. this is the formula
HTML Code:
=IF($G2=2,$G2*90,IF(AND($G2<4,$G2>2),"$270.00",IF($G2>6,360+(($G2-6)*50),IF(AND($G2>=4,$G2
My F4 key (which I use constantly) works for every "repeat" function except for inserting rows or columns. I can repeat every other option EXCEPT inserting rows/columns. I just had Office 2007 uninstalled and had Office 2003 put back on my PC. My IT group can't figure it out.
View 3 Replies View RelatedIn the excel sheet bellow that I'm attaching you will see what I'm looking for.
View 8 Replies View RelatedI'm trying to transpose multiple values in Excel, but I'd also like to repeat row values for columns A through E. The attached file "Raw Data" worksheet shows what I start with, and the "End Result" worksheet shows what I'd like the end result to be.
View 3 Replies View RelatedI am trying to drag a numerical value down (X4-X10) but I need it to repeat two rows in between, simultaneously keep the numbering in sequence only after the repeats 2 rows in between, and perform the previously mentioned 2 tasks any row in a column. So far, I have to manually enter or when I select cell X4 and X5 together ( having a value of 1 and 2 respectively) and drag, the value does not repeat 2 rows in between and does not keep the numbering in sequence after the 2 rows.
At Present:
X4 1
X5 2
X6 3
X7 4
X8 5
X9 6
X10 7
I need to have
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ] 1
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+1 1
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+2 1
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+3 2
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+4 2
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+5 2
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+6 3
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+7 3
X [nsubscript1, or nsubscript2, or nsubscript3... nsubscript10000 ]+8 3
and so on...
I have a 2000+ rows to manually input and hence it is not practical!.
I need to repeat the following rows and formula with column a starting at 9150 and going through 15,000 in 50 point increments. Need formula I can copy and paste easly. see the attached example.
View 4 Replies View RelatedI have a list of 130 names in column A. I have a number value between 0-10 in column B (next to the name). I need to insert the number of rows defined by the value in column B, below each row that I already have (if the value is 0, then the row needs to be deleted). The inserted rows have to be filled with the name value from the row above.
For example - before macro:
Joe Bloggs 2
Adam Wilson 10
Peter Andrews 0
Claire Burrows 6
After macro:
Joe Bloggs
Joe Bloggs
Adam Wilson
Adam Wilson
Adam Wilson
Adam Wilson....................................
I'll try to explain this the best I can. What I have here is a time study. Teachers (which are the control numbers) fill out bubble sheets, then I run them through a scanner. After dissecting the data from the scanner and formatting it to my liking i get this below.
Each teacher/staff member fills out three sheets per quarter. Each letter (bubble) counts as a 0:15 min period of time. Only K thru Q counts as billable time, which I've created a formula to count those letters (column 3). But to be countable each control number has to have three cycles 201,202,203.
So I need something that can take each control number that has three cycles and add their # of 0:15 together.
The italic row below only has one cycle for that control number, so that needs to be deleted or ignored.
Ultimately I would like the results on a separate sheet.
This is only a part of the file, there are over 1000 different control numbers.
I can export inventory data from my Point of Sale system that looks like this:
I need to manipulate it to look like this:
To do so I think I need a macro(?) to:
Copy and insert as many rows as the quantity in Column C. In case of >1 the row is deleted.
This would allow me to print labels for every item in my inventory.
Code is trying to
1. Where there is data in column B
2. Goto first row of data
2. If column J = "Closed"
3. then select Cells from column B to J in that row and colour these cells in red
4. If column J= "Open"
5. the select Celss from column B to J in that row and colour these cells in grey
4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
===============================================================
Sub Colourclosed()
Sheets("Risks").Select
Dim LastRow As Long
Dim i As Long
LastRow = Range("B" & Rows.Count).End(xlUp).Row
For i = 8 To LastRow
If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select
Selection.Interior.ColorIndex = 3
[code].....
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
I have a list in Excel, and it has the company in one column, and it's information in the next x rows until there is a blank row (4-7 rows). I get that you can copy the rows under the Company, transpose next to the company, and then delete the contents of the cells that you just took the data from, but I have 6200 rows do to this to, for 500+ companies. I tried recording a macro for two entries, and this is what I have (see below), but how do I modify this so that I don't need to type in every single range, and it will do it to the whole column? The data is in column A, I am posting in column B.
Basics for Macro Requirement:
1. Find the blank cell in row A
2. Skip the next cell/row (this is the company)
3. Select all the cells beneath the company cell, until it reaches the blank cell underneath
4. Copy, transpose these cells next to the Company cell (transpose in column B)
5. Delete the contents in row A that were just transposed
6. Find the next cell with data (company)
7. Repeat Steps 2-6
My recorded Macro:
Sub Macro2()
'
' Macro2 Macro
'
' Keyboard Shortcut: Ctrl+q
'
Range("A3:A8").Select
[code]....
I've got a rather simple question. I need a code which would activate a cell which is located 10 rows down from the currently active cell. I found this piece of code
Sub move()
ActiveCell.End(xlUp).Offset(10, 0).Activate
End Sub
but somehow it does not do the job it is supposed to do.
I have a sheet that holds my inventory and has 3 colums. The colums are serialnumber, techid and date. I also have a sheet for each techid. Is there a way to delete/move a row of data if the serialnumber is entered on another sheet.
example.
I have a serialnumber added to my first sheet. I go to a techid sheet and enter that same serial number. Is there a way to copy the entire row the same serialnumber is on and copy to the current sheet? Possibly a search function where I enter a serialnumber and it finds the same thing on the main sheet and copies the rows into the current sheet.
I need a way to move every 7 rows into columns.
So rows 1-7 become columns 1-7, rows 8-14 into columns 1-7 etc.
I'm trying to adapt a macro written elsewhere on this forum for my purposes. I need to move 127 rows of data into one row. The macro written does exactly what I would like, except that it only works for 3 rows, rather than 127. How do I get this to work?Here's what I have so far:
[Code].....
We run reports from active directory to see user accounts that have not been logged into the network between 30 and 90 days. We have a few spreadsheets within a workbook (Investigate, Disable, Delete, No Action). All user accounts are imported into the investigate spreadsheet. What we would like to do is automatically take predecided accounts (service accounts that we do not log on to the network - only meant for services, etc) and move them from the investigate spreadsheet into the No Action spreadsheet. These accounts all start with svc. Generic accounts start with GEN and so on....
View 14 Replies View RelatedI am trying to create a macro the looks at column A and moves the entire row to another worksheet or deletes the entire row based off of the value in each cell. Right now I have the Macro replace the downloaded values to either AG, G, GI, ICP, IMG or delete. The idea be to move all of the values with AG in column A to the AG worksheet, move G to the G worksheet, etc.. and then delete all of those with delete in the cell.
View 14 Replies View Relatedi learned how to highlight a row by placing an X in a single cell, my next question is:
Is there a way (most Likely there is) By placing "J/C" into a cell, make the entire row cut and then insert itself into my second sheet on row 2? "insert into a new row and not over existing information?"
now i have done this in the past using a Macro, select the row and then by pressing ctrl+k it would cut the row and then insert it into row 2 of the second sheet.
I've got a pretty nice Worklist setup in Excel that enables you to organize all the work you need to do in a month. However i end up with little holes in the list whenever i finish a task because what my macroes does is whenever a job is marked as done on the list it moves that job to sheet2, which contains completed jobs. I'd like to have a macro that shifts all the rows 1 down whenever a job is completed(ill just call it from the job complete macro) but it needs to jump over(skip) row 26 because that row contains some images that my macros use. Altso i would like to, if possible avoid inserting any rows or cells or hiding them because that will totally mess up my macros :p I know i know, im not dynamic enough.
I've included a sample of the worksheet so you can see what i want.
By the way, I've altso got some trouble with a public function.